In situ preparation and enhanced mechanical properties of carbon nanotube/hydroxyapatite composites

International Journal of Applied Ceramic Technology

Volumn 8, Issue 3, 2011, Pages 532-539

  Lei, Ting ^a   Wang, Li ^a   Ouyang, Chun ^b   Li, Nian Feng ^a   Zhou, Le Shan ^c  

^a CENTRAL SOUTH UNIVERSITY   (China)

^b CENTRAL SOUTH UNIVERSITY   (China)

^c Central South University   (China)

Author keywords

[No Author keywords available]

Indexed keywords

BONDING STRENGTH; CHEMICAL PRECIPITATION; DISPERSANTS; FLEXURAL STRENGTH; HOT PRESSED SINTERING; IN-SITU; MATRIX; MULTI-WALLED; POLYVINYL PYRROLIDONE; REINFORCING PHASE;

ADSORPTION; BENZENE; CARBON NANOTUBES; FRACTURE TOUGHNESS; HYDROXYAPATITE; PRECIPITATION (CHEMICAL); SINTERING;

MECHANICAL PROPERTIES;

EID: 79955660284     PISSN: 1546542X     EISSN: 17447402     Source Type: Journal    
DOI: 10.1111/j.1744-7402.2010.02602.x     Document Type: Article

References (35)

1. D. Arcos, J. Rodriguez-Carvajal, and, M. Vallet-Regi, " Neutron Scattering for the Study of Improved Bone Implants," Phys. B, 350 E607-E610 (2004). (Pubitemid 41066603)
2. A. J. Ruys, M. Wei, C. C. Sorrell, M. R. Dickson, A. Brandwood, and, B. K. Milthorpe, " Sintering Effects on the Strength of Hydroxyapatite," Biomaterials, 16 409-415 (1995).
3. J. Li, H. Liao, and, L. Hermansson, " Sintering of Partially-Stabilized Zirconia and Partially-Stabilized Zirconiaa-Hydroxyapatite Composites by Hot Isostatic Pressing and Pressureless Sintering," Biomaterials, 17 1787-1790 (1996). (Pubitemid 26355422)
4. J. A. Delgado, L. Morejoân, S. MartÎ'nez, M. P. Ginebra, N. Carlsson, and, E. Fernaândez, " Zirconia-Toughened Hydroxyapatite ceramic Obtained by Wet Sintering," J. Mater. Sci. Mater. Med., 10 715-719 (1999). (Pubitemid 30064188)
5. Z. Shen, E. Adolfsson, M. Nygren, L. Gao, H. Kawaoka, and, K. Niihara, " Dense Hydroxyapatite-Zirconia Ceramic Composites with High Strength for Biological Applications," Adv. Mater., 13 214-216 (2001). (Pubitemid 32873919)
6. M. A. Lopes, F. J. Monterio, and, J. D. Santos, " Glass-Reinforced Hydroxyapatite Composites: Fracture Toughness and Hardness Dependence on Microstructural Characteristics," Biomaterials, 20 2085-2090 (1999).
7. F. N. Oktar, and, G. Goller, " Sintering Effects on Mechanical Properties of Glass-Reinforced Hydroxyapatite Composites," Ceram. Int., 28 617-621 (2002). (Pubitemid 34772586)
8. T. K. Chaki, and, P. E. Wang, " Densification and Strengthening of Silver-Reinforced Hydroxyapatite-Matrix Composite Prepared by Sintering," J. Mater. Sci. Mater. Med., 5 533-542 (1994). (Pubitemid 24347373)
9. X. Zhang, G. H. M. Gubbels, R. A. Terpstra, and, R. Metselaar, " Toughening of Calcium Hydroxyapatite with Silver Particles," J. Mater. Sci., 32 235-243 (1997). (Pubitemid 127503360)
10. A. Slosarczyk, M. Klisch, M. Bazewicz, J. Piekarczyk, L. Stobierski, and, A. Rapacz-Kmita, " Hot Pressed Hydroxyapatite-Carbon Fibre Composites," J. Eur. Ceram. Soc., 20 1397-1402 (2000). (Pubitemid 30419266)
11. K. Park, and, T. Vasilos, " Characteristics of Carbon Fibre-Reinforced Calcium Phosphate Composites Fabricated by Hot Pressing," J. Mater. Sci. Lett., 16 985-987 (1997). (Pubitemid 127504412)
12. J. L. Xu, K. A. Khor, J. J. Sui, and, W. N. Chen, " Preparation and Characterization of a Novel Hydroxyapatite/Carbon Nanotubes Composite and its Interaction with Osteoblast-Like Cells," Mater. Sci. Eng. C, 29 44-49 (2009).
13. A. A. White, S. M. Best, and, I. A. Kinloch, " Hydroxyapatite-Carbon Nanotube Composites for Biomedical Applications: A Review," Int. J. Appl. Ceram. Technol., 4 1-13 (2007). (Pubitemid 46189571)
14. K. Balani, R. Anderson, T. Laha, M. Andara, J. Tercero, and, E. Crumpler, " Plasma-Sprayed Carbon Nanotube Reinforced Hydroxyapatite Coatings and their Interaction with Human Osteoblasts In Vitro," Biomaterials, 28 618-624 (2007). (Pubitemid 44647448)
15. K. Balani, S. R. Bakshi, Y. Chen, T. Laha, and, A. Agarwal, " Role of Powder Treatment and Carbon Nanotube dispersion in the Fracture Toughening of Plasma-Sprayed Aluminum Oxide-Carbon Nanotube Nanocomposite," J. Nanosci. Nanotechnol., 7 [10] 3553-3562 (2007).
16. Y. Chen, Y. Q. Zhang, T. H. Zhang, C. H. Gan, C. Y. Zheng, and, G. Yu, " Carbon Nanotube Reinforced Hydroxyapatite Composite Coatings Produced Through Laser Surface Alloying," Carbon, 44 37-45 (2006). (Pubitemid 41443533)
17. C. Kealley, M. Elcombe, A. van Riessen, and, B. Ben-Nissan, " Neutron Characterisation of Hydroxyapatite Bioceramics," Key Eng. Mater., 309-311 61-64 (2006).
18. S. K. Aryal, B. C. Remant, N. Dharmaraj, K. W. Kim, and, H. Y. Kim, " Synthesis and Characterization of Hydroxyapatite using Carbon Nanotubes as a Nano-Matrix," Scr. Mater., 54 31-35 (2006).
19. Q. Wei, X. P. Yang, G. Q. Chen, J. T. Tang, and, X. L. Deng, " The Ultrasonic Assisted Synthesis of Nano-Hydroxyapatite and MWCNT/Hydroxyapatite Composites," New Carbon Mater., 20 164-170 (2005). (Pubitemid 40956155)
20. S. Kobayashi, and, W. Kawai, " Development of Carbon Nanofiber Reinforced Hydroxyapatite with Enhanced Mechanical Properties," Compos.: Part A, 38 114-123 (2007). (Pubitemid 44792485)
21. A. M. Li, K. N. Sun, W. F. Dong, and, D. M. Zhao, " Mechanical Properties, Microstructure and Histocompatibility of MWCNT/HAp Biocomposites," Mater. Lett., 61 1839-1844 (2007).
22. H. P. Li, N. Q. Zhao, Y. Liu, C. Y. Liang, C. H. Shi, and, X. W. Du, " Fabrication and Properties of Carbon Nanotubes Reinforced Fe/Hydroxyapatite Composites by In Situ Chemical Vapor Deposition.," Compos.: Part A, 39 1128-1132 (2008).
23. L. L. Hench, and, J. Wilson, An Introduction to Bioceramics, World Scientific Pub Co Inc., Singapore, 1993.
24. M. Bengisu, Engineering Ceramics (Chapter 4), Springer-Verlag, Berlin, 2001, 227pp.
25. G. R. Anstis, P. Chantikul, and, D. B. Marshall, " A Critical Evaluation of Indentation Technique for Measuring Fracture Toughness: I, Direct Crack Method," J. Am. Ceram. Soc., 64 533-538 (1981).
26. P. S. Uskokovic, C. Y. Tang, C. P. Tsui, N. Ignjatovic, and, D. P. Uskokovic, " Micromechanical Properties of a Hydroxyapatite/Poly-l-Lactide Biocomposite using Nanoindentation and Modulus Mapping," J. Eur. Ceram. Soc., 27 1559-1564 (2007). (Pubitemid 44743193)
27. L. Zhao, and, L. Gao, " Novel In Situ Synthesis of MWNTs-Hydroxyapatite Composites," Carbon, 42 423-426 (2004).
28. M. J. O'Connell, P. J. Boul, L. M. Ericson, C. B. Huffman, Y. Wang, and, E. H. Haroz, " Reversible Water-Solubilization of Single-Walled Carbon Nanotubes by Polymer Wrapping," Chem. Phys. Lett., 342 265-271 (2001). (Pubitemid 33628289)
29. L. Q. Jiang, L. Gao, and, J. Sun, " Production of Aqueous Colloidal Dispersions of Carbon Nanotubes," J. Colloid Interface Sci., 260 89-94 (2003). (Pubitemid 36398190)
30. Z. Shen, and, G. T. Wang, Colloids and Surfaces Chemistry, Chemical Industry Press, Peking, 1991.
31. M. Husanu, M. Baibarac, and, I. Baltog, " Non-Covalent Functionalization of Carbon Nanotubes: Experimental Evidence for Isolated and Bundled Tubes," Phys. E, 41 66-69 (2008).
32. Z. T. Zhang, B. Zhao, and, L. M. Hu, " PVP Protective Mechanism of Ultrafine Silver Powder Synthesized by Chemical Reduction Processes," J Solid State Chem., 121 105-110 (1996). (Pubitemid 126315935)
33. P. S. Jiang, Y. Li, S. S. Xie, Y. Gao, and, L. Song, " Machinable Long PVP-Stabilized Silver Nanowires," Chem. Eur. J., 10 4817-4821 (2004).
34. I. Ahmad, H. Z. Cao, H. H. Chen, H. Y. Zhao, A. Kennedy, and, Y. Q. Zhu, " Carbon Nanotube Toughened Aluminum Oxide Nanocomposite," J. Eur. Ceram. Soc., 30 865-873 (2010).
35. E. Flahaut, A. Peigney, C. H. Laurent, C. MarliÃre, F. Chastel, and, A. Rousset, " Carbon Nanotube-Metal-Oxide Composites: Microstructure, Electrical Conductivity and Mechanical Properties," Acta Mater., 48 3803-3812 (2000).