A new energy saving for the determination of mixing temperature in hot mix asphalts

Energy Education Science and Technology Part A: Energy Science and Research

Volumn 26, Issue 2, 2011, Pages 103-117

  Yener, Engin ^a   Hinislioglu, Sinan ^b  

^a BAYBURT UNIVERSITY   (Turkey)

^b ATATÜRK UNIVERSITY   (Turkey)

Author keywords

Energy consumption; Gas emission; Hot mix asphalt; Mixing temperature; Pavement

Indexed keywords

ASPHALT BINDERS; ASPHALT INDUSTRIES; BINDER VISCOSITY; COARSE AGGREGATES; CONVENTIONAL METHODS; EXPERIMENTAL STUDIES; HOT MIX ASPHALT; MAXIMUM AGGREGATE SIZES; MIX DESIGNS; MIXING TEMPERATURE; MIXING TIME; MIXTURE PROPERTIES; PERFORMANCE BENEFITS; PERFORMANCE PROBLEMS; RESTRICTED ZONE; TEMPERATURE RANGE;

AGGREGATES; ASPHALT PAVEMENTS; BINDERS; COATINGS; CRUDE OIL; ENERGY CONSERVATION; ENERGY UTILIZATION; GAS EMISSIONS; MIXING; PAVEMENTS; VISCOSITY;

ASPHALT MIXTURES;

EID: 79955648740     PISSN: 1308772X     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (56)

1. EPA. Hot Mix Asphalt Plants Emission Assessment Report. US Environmental Protection Agency, Office of Air Quality Planning and Standards Research Triangle Park, NC 27711, EPA-454/R-00-019, 2000.
2. Thenoux G, Gonzalez A, Dowling R. Energy consumption comparison for different asphalt pavements rehabilitation techniques used in Chile. Res Conser Recyc 2007;49:325-339.
3. Bakis R, Koyuncu H, Demirbas A. An investigation of waste foundry sand (WFS) in asphalt concrete mixture. Waste Manage Res 2006;24: 269-2746.
4. Demirbas A. Energy concept and energy education. Energy Educ Sci Technol Part B 2009;1:85-101.
5. Demirbas AH. Biofuels for future transportation necessity. Energy Educ Sci Technol Part A 2010;26:13-23.
6. Kecebas A, Alkan MA. Educational and consciousness-raising movements for renewable energy in Turkey. Energy Educ Sci Technol Part B 2009;1:157-170.
7. Kurnaz MA, Calik M. A thematic review of energy'teaching studies: focuses, needs, methods, general knowledge claims and implications. Energy Educ Sci Technol Part B 2009;1:1-26.
8. Demirbas A. Concept of energy conversion in engineering education. Energy Educ Sci Technol Part B 2009;1:183-197.
9. Cardak O. The determination of the knowledge level of science students on energy flow through a word association test. Energy Educ Sci Technol Part B 2009;1:139-155.
10. Demirbas A. Social, economic, environmental and policy aspects of biofuels. Energy Educ Sci Technol Part B 2009;1:75-109.
11. Tatli ZH. Computer based education: Online learning and teaching facilities. Energy Educ Sci Technol Part B 2009;1:172-181.
12. Kan A. General characteristics of waste management: A review. Energy Educ Sci Technol Part A 2009:23:55-69.
13. Demirbas AH. Inexpensive oil and fats feedstocks for production of biodiesel. Energy Educ Sci Technol Part A 2009;23:1-13.
14. Caglar A. Valorization of tea wastes by pyrolysis. Energy Educ Sci Technol Part 2009;23:135-144
15. Saidur R. Energy, economics and environmental analysis for chillers in office buildings. Energy Educ Sci Technol Part A 2010;25:1-16.
16. Keskin A, Emiroglu AO. Catalytic reduction techniques for post-combustion diesel engine exhaust emissions. Energy Educ Sci Technol Part A 2010;25:87-103.
17. Saidur R. Energy, economics and environmental analysis for chillers in office buildings. Energy Educ Sci Technol Part A 2010;25:1-16.
18. Mahlia TMI, Saidur R, Husnawan M, Masjuki HH, Kalam MA. An approach to estimate the life-cycle cost of energy efficiency improvement of room air conditioners. Energy Educ Sci Technol Part A 2010;26:1-11.
19. Balat H. Prospects of biofuels for a sustainable energy future: A critical assessment. Energy Educ Sci Technol Part A 2010;24:85-111.
20. Demirbas B. Biomass business and operating. Energy Educ Sci Technol Part A 2010;26:37-47.
21. Yenikaya C, Yaman H, Atar N, Erdogan Y, Colak F. Biomass resources and decolorization of acidic dyes from aqueous solutions by biomass biosorption. Energy Educ Sci Technol Part A 2009;24:1-13.
22. Demirbas MF. Bio-oils from corn stover via supercritical water liquefaction. Energy Educ Sci Technol Part A 2009;23:97-104.
23. Ozkurt I. Qualifying of safflower and algae for energy. Energy Educ Sci Thecnol Part A 2009;23:145-151.
24. Demirbas MF. Microalgae as a feedstock for biodiesel. Energy Educ Sci Technol Part A 2010;25:31-43.
25. Ucar A. The environmental impact of optimum insulation thickness for external walls and flat roofs of building in Turkey's different degree-day regions. Energy Educ Sci Technol Part A 2009;24:49-69.
26. Sevim C. Rapid climate change problem and wind energy investments for Turkey. Energy Educ Sci Technol Part A 2010;25:59-67.
27. Akpinar EK, Akpinar S. Modelling of weather characteristics and wind power density in Elazig-Turkey. Energy Educ Sci Technol Part A 2010;25:45-57.
28. Rajamohan P, Rajasekhar RVJ, Shanmugan S, Ramanathan K. Energy and economic evaluation of fixed focus type solar parabolic concentrator for community cooking applications. Energy Educ Sci Technol Part A 2010;26:49-59.
29. Saidur R, Lai YK. Parasitic energy savings in engines using nanolubricants. Energy Educ Sci Technol Part A 2010;26:61-74.
30. Ralegaonkar RV, Gupta R. Application of passive solar architecture for intelligent building construction: A review. Energy Educ Sci Technol Part A 2010;26:75-85.
31. Bugutekin A, Yilmaz M, Kentli A, Isikan MO. A mathematical model for condensation of bubbles injected through an orifice into subcooled water. Energy Educ Sci Technol Part A 2010;24:151-171.
32. Kecebas A, Kayfeci M. Effect on optimum insulation thickness, cost and saving of storage design temperature in cold storage in Turkey. Energy Educ Sci Technol Part A 2010;25:117-127.
33. Cerci Y. Experimental investigation of capacitor effects on performance parameters planning for household refrigerator and energy systems. Energy Educ Sci Technol Part A 2009;24:15-24.
34. Bolukbasi A, Comakli K, Sahin S. Domestic energy savings: Investigation of optimum insulation thicknesses for the external wall of rural houses in Turkey. Energy Educ Sci Technol Part A 2009;24:25-37.
35. Gerritsen AH. Innovating: the way ahead - International trends in developments of binders and asphalt. AAPA, Perth, Australia, 1997.
36. EAPA. Health and Safety in the Asphalt Pavement Industry - Management Guidelines. New York, 1992.
37. Harrison T, Christodulaki L. Innovative processes in asphalt production and application -strengthening asphalt's position in helping to build a better world. First International Conference 'World of Asphalt Pavements', Sydney, Australia, 2000.
38. Asphalt Institute. Laoratory Mixing and Compaction Temperatures. Asp. Ins. Tech. Bulletin, 2010. http://www.asphaltinstitute.org/public/engineering/PDFs/Superpave/Lab_Mixing_Comp._Temps.
39. Traxler R.N. Durability of Asphalt Cements, Proceedings, Association of Asphalt Paving Technologists, Vol. 32, pp 44-58, 1963.
40. Petersen JC. Chemical Composition of Asphalt as Related to Asphalt Durability. State of the Art, Transportation Research Record, 999, (Transportation Research Board, Washington, D.C.), pp. 13-30, 1984.
41. RN. Bituminous Mixtures In Road Construction. Thomas Telford Services Ltd, London, 1994.
42. Whiteoak CD. Shell Bitumen Handbook, Surrey, UK, 1990.
43. Noureldin AS. Long Term Performance Of Asphalt Cement Binders; A Dual View, Physical Properties Of Asphalt Cement Binders. ASTM STP 1241, John C. Hardin, Ed., American Society For Testing And Materials, Philadelphia, 1995.
44. Romero P, Roque R. Evaluation of Long-Term Oven Aging of Asphalt Mixtures (AASHTO PP2) on Superpave Thermal Cracking Performance Predictions. Progress of Superpave: Evaluation and Implementation, ASTM STP 1322, R. N. Jester, Ed., American Society for Testing and Materials, 1997.
45. Bahia HU. Recommendations for mixing and compaction temperatures of modified binders. National Cooperative Highway Research Program Report 9-10, Transportation Research Council, Washington, D.C., 2000.
46. Shenoy A. Determination of the Temperature for Mixing Aggregates with Polymer-Modified Asphalts. Int J Pavement Eng., Nottingham, UK, 2001.
47. Khatri A, Bahia HU, Hanson D. Mixing and compaction temperatures for modified binders using the superpave gyratory compactor. J Assoc Asphalt Paving Technol 2001;70:368-395.
48. Tang Y, Haddock JE, Field Testing Of The Zero-Shear Viscosity Method. Purdue University, Transportation Research Circular, Number E-C105, 2006.
49. Yildirim Y, Ideker J, Hazlett D. Evaluation of viscosity values for mixing and compaction temperatures. J Mater Civil Eng 2006;18:545-553.
50. Asphalt Institute. Mix Design Methods for Asphalt Concrete and Other Hot-Mix Types. Manual Series No. 1, 1962.
51. Asphalt Institute. Mix Design Methods for Asphalt Concrete and Other Hot-Mix Types. Manual Series No. 2, 1974.
52. Asphalt Institute. Superpave Mix Design. Superpave Series No. 2 (SP-02). Asphalt Institute. Lexington, KY, 2001.
53. Tunc A. Esnek Kaplama Malzemeleri El Kitabi. Asil Yayin Dagitim, Istanbul, 2004 (in Turkish).
54. Corlew JS, Dickson PF. Methods for Calculating Temperature Profiles of Hot-Mix Asphalt Concrete as Related to the Construction of Asphalt Pavements. Asphalt Paving Technology, Proceedings: Association of Asphalt Paving Technologists Technical Sessions 1968;37:101-140.
55. http://www.asmud.org.tr/usr_img/asfalt/turkiye_asfalt_endustrisi_raporu.pdf (in Turkish).
56. Demirbas A. Progress and recent trends in biofuels. Prog Energy Combus Sci 2007;33:1-18.