Annealing behaviour of sub-stoichiometric Ti(C,N)-W mechanical alloy powders

International Journal of Refractory Metals and Hard Materials

Volumn 29, Issue 4, 2011, Pages 445-451

  Maweja, Kasonde ^a,b   Cornish, L A ^b,c   Can, Nedret ^a  

^a UNIVERSITY OF THE WITWATERSRAND   (South Africa)

^b Element Six Pty Ltd South Africa   (South Africa)

^c UNIVERSITY OF THE WITWATERSRAND   (South Africa)

Author keywords

Annealing; Lattice strain; Mechanical alloying; Thermal alloying; Titanium; Tungsten

Indexed keywords

ANNEALING TEMPERATURES; DE-MIXING; FINISH TEMPERATURE; INTERMETALLIC COMPOUNDS; LATTICE STRAIN; MECHANICAL ALLOYS; MECHANICALLY ALLOYED; MECHANICALLY ALLOYED POWDER; METASTABLE SOLID SOLUTION; MILLED POWDERS; MILLING CONDITIONS; SEM; SOLUTION PHASIS; THERMAL ALLOYING; TI (C ,N); XRD , TEM;

ANNEALING; CERIUM ALLOYS; INTERMETALLICS; MECHANICAL ALLOYING; METALLURGY; METASTABLE PHASES; MILLING (MACHINING); POWDERS; STRAIN; TITANIUM;

TUNGSTEN;

EID: 79955539933     PISSN: 02634368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijrmhm.2011.01.014     Document Type: Article

References (38)

1. K. Maweja, L.A. Cornish, and N. Can Transformation and alloying mechanisms in sub-stoichiometric titanium carbonitrides-tungsten high energy ball milled powders Int J Refract Met Hard Mater 29 2011 312 319
2. F. Akhtar An investigation on the solid state sintering of mechanically alloyed nano-structured 90W-Ni-Fe tungsten heavy alloy Int J Refract Met Hard Mater 26 2008 145 151 (Pubitemid 351215673)
3. X. Wang, P. Feng, F. Akhtar, J. Wu, W. Liu, and Y. Qiang Effects of tungsten and aluminium additions on the formation of molybdenum disilicide by mechanically-induced self-propagation reaction J Alloys Compd 490 2010 388 392
4. A. Genç, S. Coşkun, and M.L. Öveçoǧlu Decarburization of TiC in Ni activated sintered W-xTiC (x = 0, 5, 10, 15 wt%) composites and the effects of heat treatment on the microstructural and physical properties Int J Refract Met Hard Mater 28 2010 451 458
5. H. Amini Mashhadi, P. Manikandan, R. Suetsugu, S. Tanaka, and K. Hokamoto Synthesis of AlN-TiN nanostructured composite powder by reactive ball milling and subsequent thermal treatment J Alloys Compd 506 2010 653 660
6. W. Qingxiang, L. Shuhua, F. Zhikang, and C. Xin Fabrication of W-20 wt% Ti alloy by pressureless sintering at low temperature Int J Refract Met Hard Mater 28 2010 576 579
7. A. Przybył, and J.J. Wysłocki The effect of annealing temperature an structure and magneticproperties of nanocomposite Nd10Fe84-xWxB6 (0 < x < 33 at.%) magnets J Mater Process Technol 175 2006 352 357 (Pubitemid 43767644)
8. Q.X. Wang, X.F. Wang, Y. Yang, and Z.K. Fan Preparation of W-15 wt% Ti prealloyed powders Int J Refract Met Hard Mater 27 2009 847 851
9. S. Park, Y.J. Kang, H.J. Kwon, and S. Kang Synthesis of Ti(, M1, M2)(CN)-Ni nanocrystalline powders Int J Refract Met Hard Mater 24 2006 115 121
10. W.M. Tang, Z.X. Zheng, H.J. Tang, R. Ren, and Y.C. Wu Structural evolution and grain growth kinetics of the Fe-28Al elemental powder during mechanical alloying and annealing Intermetallics 15 2007 1020 1026 (Pubitemid 46891241)
11. G.P. Khanra, A.K. Jha, S. Girikumar, K.T. Tharian, and S. Kumar Processing of Cr2Nb precursor through powder metallurgy route Powder Technol 197 2010 177 183
12. A. Mashreghi, and M.M. Moshksar Annealing behaviour of mechanically alloyed nanocrystalline NiAl intermetallic under oxidizing and non-oxidizing conditions J Alloys Compd 484 2009 957 960
13. S.D. Kaloshkin, V.V. Tcherdyntsev, I.A. Tomilin, Y.V. Baldokhin, and E.V. Shelekhov Phase transformations in Fe-Ni system at mechanical alloying and consequent annealing of elemental powder mixtures Phys B 229 2001 236 241 (Pubitemid 32534138)
14. Z. Luo, and Z.Q. Li A W - In solid solution synthesized by mechanical alloying Mater Sci Eng A 459 2007 47 51 (Pubitemid 46586103)
15. Kh Gheisari, J.T. Oh, and S. Javadpour The effect of heat treatment on the microstructure and magnetic properties of mechanically alloyed Fe-45%Ni nanostructured powders J Alloys Compd 509 2011 1020 1024
16. 21.7 alloy powders Intermetallics 16 2008 1279 1284
17. J.S. Blázquez, V. Franco, C.F. Conde, and A. Conde Nanocrystalline Fe-Nb-(B, Ge) alloys from ball milling: microstructure, thermal stability and magnetic properties Intermetallics 15 2007 1351 1360 (Pubitemid 47042422)
18. B.N. Mondal, A. Basumallick, and P.P. Chattopadhyay Magnetic behavior of nanocrystalline Cu-Ni-Co alloys prepared by mechanical alloying and isothermal annealing J Alloys Compd 457 2008 10 14 (Pubitemid 351601653)
19. A.S. Bolokang, and M.J. Phasha Thermal analysis on the curie temperature of nanocrystalline Ni produced by ball milling Adv Powder Technol 2010 10.1016/j.apt.2010.07.005
20. E. Gordo, B. Gómez, E.M. Ruiz-Navas, and J.M. Torralba Influence of milling parameters on the manufacturing of Fe-TiCN composite powders J Mater Process Technol 162-163 2005 59 64 (Pubitemid 40589876)
21. B. Gómez, E. Gordo, and J.M. Torralba Influence of milling time on the processing of Fe-TiCN composites Mater Sci Eng A 430 2006 59 63 (Pubitemid 44109106)
22. 1 - x-based cermets by one step mechanically induced self-sustaining reaction: powder synthesis and pressureless sintering J Eur Ceram Soc 28 2008 2085 2098
23. J.C. Crivello, T. Nobuki, and T. Kuji Limits of the Mg-Al γ-phase range by ball-milling Intermetallics 15 2007 1432 1437 (Pubitemid 47102618)
24. K.B. Zhang, Z.Y. Fu, J.Y. Zhang, J. Shi, W.M. Wang, and H. Wang Nanocrystallie CoCrFeNiCuAl high-entropy solid solution synthesized by mechanical alloying J Alloys Compd 485 2009 131 134
25. S. Louidi, F.Z. Bentayeb, W. Tebib, J.J. Suñol, A.M. Mercier, and J.M. Grenèche Amorphisation of Cr-10Co mixture by mechanical alloying J Non-Cryst Solids 356 2010 1052 1056
26. 40 Phys B 293 2001 249 259 (Pubitemid 32139173)
27. A.S. Kurlov, A.I. Gusev, and A.A. Rempel Vacuum sintering of WC-8wt% Co hardmetals from WC powders with different dispersity Int J Refract Met Hard Mater 29 2 2011 221 231
28. A.S. Bolokang, M.J. Phasha, C. Oliphant, and D. Motaung XRD analysis and microstructure of milled and sintered V, W, C, and Co powders Int J Refract Met Hard Mater 29 2011 108 111
29. A.S. Bolokang, and M.J. Phasha Formation of titanium nitride produced from nanocrystalline titanium powder under nitrogen atmosphere Int J Refract Met Hard Mater 28 2010 610 615
30. J.S. Benjamin Mechanism of mechanical alloying Metall Trans 8 1974 1929 1934
31. T.B. Massalski Binary alloys phase diagrams 2d ed. 1990 3497 3498 Vol. 3
32. M.S. El-Eskandarany, K. Sumiyama, K. Aoki, and K. Suzuki Morphological and structural evolutions of non-equilibrium titanium-nitride alloy powders produced by reactive ball milling J Mater Res 7 1992 888 893
33. J. Eckert, and L. Schultz Amorphization reaction during mechanical alloying: influence of milling conditions J Mater Sci 26 1991 441 446
34. N.S. Cohen, E. Ahlswede, J.D. Wicks, and Q.A. Pankhurst Investigation of the ternary phase diagram of mechanically alloyed FeCuAg J Condens Matter 9 1997 3259 3276 (Pubitemid 127587769)
35. T.F. Grigor'eva, S.V. Tsybulya, S.V. Cherepanova, G.N. Kryukova, A.P. Barinova, and V.D. Belykh Mechanochemical synthesis of metastable solid solutions: phase composition and microstructure evolution Inorg Mater 36 2000 143 149
36. M. Krüger, S. Franz, H. Saage, M. Heilmaier, J.H. Schneibel, and P. Jéhanno Mechanically alloyed Mo-Si-B alloys with a continuous α-Mo matrix and improved mechanical properties Intermetallics 16 2008 933 941
37. K. Maweja, M. Phasha, and N. van der Berg Microstructure and crystal structure of an equimolar Mg-Ti alloy processed by Simoloyer high energy ball mill Powder Technol 199 2010 256 263
38. y (x = 5, 10; y = 10, 15): from pure powder mixture to amorphous phase Intermetallics 16 2008 1073 1082