Retraction Notice: The effects of limewater on split tensile strength and workability of Al2O3 nanoparticles binary blended concrete (Journal of Composite Materials, (2011), 45, 6, (1059-1064), 10.1177/0021998310378909);The effects of limewater on split tensile strength and workability of Al2O3 nanoparticles binary blended concrete

Journal of Composite Materials

Volumn 45, Issue 9, 2011, Pages 1059-1064

  Nazari, Ali ^a   Riahi, Shadi ^a  

^a ISLAMIC AZAD UNIVERSITY   (Iran)

Author keywords

concrete; curing medium; split tensile strength; workability

Indexed keywords

ALUMINA; ALUMINUM OXIDE; CONCRETES; CURING; HIGH PERFORMANCE CONCRETE; HYDRATED LIME; LIME; NANOPARTICLES;

CURING MEDIUMS; FILLER EFFECTS; GEL FORMATION; PARTIAL REPLACEMENT; REPLACEMENT LEVEL; SPLIT TENSILE STRENGTHS; STRENGTH OF CONCRETE; WORKABILITY;

TENSILE STRENGTH;

EID: 79955112331     PISSN: 00219983     EISSN: 1530793X     Source Type: Journal    
DOI: 10.1177/0021998319875285     Document Type: Erratum

References (37)

1. Li H., Xiao HG, Yuan J. and Ou J. Microstructure of cement mortar with nano-particles. Compos Part B: Eng 2003 ; 35: 185-189.
2. Erdogdu K. and Tucker P. Effects of fly ash nanoparticle size on strength of Portland cement fly ash mortars. Cem Concr Res 1998 ; 28: 1217-1222. (Pubitemid 128634282)
3. Lee SH, Sakai E., Diamond M. and Bang WK Characterization of fly ash directly from electrostatic precipitator. Cem Concr Res 1999 ; 29: 1791-1797. (Pubitemid 30531591)
4. Lu P. and Young JF Hot pressed DSP cement paste. Mater Res Soc Symp Proc 1992 ; 245: 321-328.
5. Richard P. and Cheyrezy M. Reactive powder concretes with high ductility and 200-800 MPa compressive strength. San Francisco: ACI Spring Convention, SP, 1994, pp. 144-124.
6. Jo BW, Kim CH, Tae G. and Park JB Characteristics of cement mortar with nano-SiO2 nanoparticles. Consrt Build Mater 2007 ; 21 (6). 1351-1355. (Pubitemid 46216798)
7. Kuo WT, Lin KL, Chang WC and Luo HL Effects of nano-materials on properties of waterworks sludge ash cement paste. J Indian Eng Chem 2006 ; 12 (5). 702-709.
8. Lin DF and Tsai MC The effects of nanomaterials on microstructures of sludge ash cement paste. J Air Waste Manag Assoc 2006 ; 56: 1146-1154.
9. Li H., Xiao H. and Ou J. A study on mechanical and pressure-sensitive properties of cement mortar with nanophase materials. Cem Concr Res 2004 ; 34: 435-438.
10. Li H., Zhang M. and Ou J. Abrasion resistance of concrete containing nano-nanoparticles for pavement. Wear 2006 ; 260: 1262-1266. (Pubitemid 43765990)
11. Flores-Velez LM and Dominguez O. Characterization and properties of Portland cement composites incorporating zinc-iron oxide nanoparticles. J Mater Sci 2002 ; 37: 983-988. (Pubitemid 34269082)
12. Nazari A., Riahi SH, Riahi SH, Shamekhi SF and Khademno A. Mechanical properties of cement mortar with Al2O3 nanoparticles. J Am Sci 2010 ; 6 (4). 94-97.
13. Nazari A., Riahi SH, Riahi SH, Shamekhi SF and Khademno A. The effects of incorporation Fe2O3 nanoparticles on tensile and flexural strength of concrete. J Am Sci 2010 ; 6 (4). 90-93.
14. Nazari A., Riahi SH, Riahi SH, Shamekhi SF and Khademno A. Improvement the mechanical properties of the concrete by using TiO2 nanoparticles. J Am Sci 2010 ; 6 (4). 98-101.
15. Nazari A., Riahi SH, Riahi SH, Shamekhi SF and Khademno A. Embedded TiO2 nanoparticles mechanical properties monitoring in cementitious composites. J Am Sci 2010 ; 6 (4). 86-89.
16. Nazari A., Riahi Sh, Riahi SH, Shamekhi SF and Khademno A. Benefits of Fe2O3 nanoparticles in concrete mixing matrix. J Am Sci 2010 ; 6 (4). 102-106.
17. Nazari A., Riahi SH, Riahi SH, Shamekhi SF and Khademno A. Assessment of the effects of the cement paste composite in presence TiO2 nanoparticles. J Am Sci 2010 ; 6 (4). 43-46.
18. Nazari A., Riahi SH, Riahi SH, Shamekhi SF and Khademno A. An investigation on the strength and workability of cement based concrete performance by using TiO2 nanoparticles. J Am Sci 2010 ; 6 (4). 29-33.
19. Nazari A., Riahi SH, Riahi SH, Shamekhi SF and Khademno A. Influence of Al2O3 nanoparticles on the compressive strength and workability of blended concrete. J Am Sci 2010 ; 6 (5). 6-9.
20. ASTM C150. Standard specification for Portland cement. In: Annual book of ASTM standards. West Conshohocken, PA: ASTM, 2001.
21. Zivica V. Effects of the very low water/cement ratio. Constr Build Mater 2009 ; 23 (8). 2846-2850.
22. AI-Khalaf MN and Yousift HA Use of rice husk ash in concrete. Int J Cem Compos Lightweight Concr 1984 ; 6 (4). 241-248.
23. ASTM C496. Standard test method for splitting tensile strength of cylindrical concrete specimens. West Conshohocken, PA: ASTM, 2001.
24. ASTM C143. Standard test method for slump of hydraulic-cement concrete. West Conshohocken, PA: ASTM, 2001.
25. Mostafa NY and Brown PW Heat of hydration of high reactive pozzolans in blended cements: isothermal conduction calorimetry. Thermochim Acta 2005 ; 435: 162-167. (Pubitemid 41214687)
26. Lin YH, Tyan YY, Chang TP and Chang CY An assessment of optimal mixture for concrete made with recycled concrete aggregates. Cem Concr Res 2004 ; 34 (8). 1373-1380.
27. Tattersall GH and Baker PH An instigation of the effect of vibration on the workability of fresh concrete using a vertical pipe apparatus. Mag Concr Res 1989 ; 14 (146). 3-9.
28. Courard L., Darimont A., Willem X., Geers C. and Degeimbre R. Repairing concretes with self-compacting concrete: testing methodology assessment. In: Proceedings of the First North American Conference on the Design and Use of Self-consolidating Concrete, Chicago, USA, 2002, pp. 267-274.
29. Felekoglu B., Tosun K., Baradan B., Altun A. and Uyulgan B. The effect of fly ash and limestone fillers on the viscosity and compressive strength of self-compacting repair mortars. Cem Concr Res 2008 ; 36: 1719-1726. (Pubitemid 44402396)
30. Banfill PFGfg. The Rheology of fresh cement and concrete: a review. In: 11th International Cement Chemistry Congress, Durban, 2003, pp. 13.
31. Lemmer C., Hartman J. and Wolf T. 'Rheological Properties of Mortars for Self-compacting Concrete,' http://www.massivbau.tu-darmstadt.de/user/lemmer/web/ scc/LeDaCon199htm, 13 pp (accessed September 2003 ).
32. Ferraris CF and Gaidis JM Connection between the rheology of concrete and rheology of cement paste. ACI Mater J 1992 ; 88: 388-393.
33. Ferraris CF Measurement of the rheological properties of high performance concrete: state of the art report. J Res Nat Inst Stand Technol 1999 ; 104: 461-478. (Pubitemid 30518530)
34. Cyr M., Legrand C. and Mouret M. Study of the shear thickening effect of superplasticizers on the rheological behavior of cement paste containing or not mineral admixtures. Cem Concr Res 2000 ; 30: 1477-1483. (Pubitemid 32022403)
35. Ferraris CF, Obla KH and Hill R. The influence of mineral admixtures on the rheology of cement paste and concrete. Cem Concr Res 2001 ; 31: 245-255. (Pubitemid 33763347)
36. Grzeszczyk S. and Lipowski G. Effect of content and nanoparticle size distribution of high-calcium fly ash on the rheological properties of cement pastes. Cem Concr Res 1997 ; 27: 907-916. (Pubitemid 127427328)
37. Lange F., Mortel N. and Rudert V. Dense packing of cement pastes and resulting consequences on mortar properties. Cem Concr Res 1997 ; 27: 1481-1488. (Pubitemid 127406667)