Factor analysis of the abrasive waterjet factors affecting the surface roughness of titanium;Faktorska analiza čimbenika abrazivnog mlaza vode koji utječu na hrapavost titanske površine

Tehnicki Vjesnik

Volumn 18, Issue 1, 2011, Pages 73-77

  Monková, Katarína ^a   Monka, Peter ^a   Vegnerová, Petra ^b   Čep, Robert ^c   Müllerová, Jana ^d   Bražina, David ^e   Duspara, Miroslav ^f  

^a TECHNICAL UNIVERSITY OF KO ICE   (Slovakia)

^b INSTITUTE OF CHEMICAL TECHNOLOGY   (Czech Republic)

^c VSB TECHNICAL UNIVERSITY OF OSTRAVA   (Czech Republic)

^d UNIVERSITY OF ILINA   (Slovakia)

^e UNIVERSITY OF OSTRAVA   (Czech Republic)

^f JOSIP JURAJ STROSSMAYER UNIVERSITY OF OSIJEK   (Croatia)

Author keywords

Abrasive waterjet; Surface roughness; Titanium

Indexed keywords

ABRASIVE MASS FLOW RATE; ABRASIVE WATER-JET; ABRASIVE WATERJET CUTTING; DEPTH OF CUT; EXPERIMENTAL RESEARCH; FACTOR ANALYSIS; FULL FACTORIAL DESIGN; INDEPENDENT VARIABLES; MICRO GEOMETRY; MULTIPLE NONLINEAR REGRESSION; PROCESS FACTOR; SURFACE QUALITIES; SURFACE ROUGHNESS PARAMETERS; TRAVERSE SPEED; WORK PIECES;

ABRASIVE CUTTING; ABRASIVES; JETS; METAL ANALYSIS; NONLINEAR EQUATIONS; QUALITY CONTROL; RATING; SURFACE PROPERTIES; TITANIUM;

SURFACE ROUGHNESS;

EID: 79953764101     PISSN: 13303651     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (24)

1. Arola, D.; Ramulu, M. Material removal in abrasive waterjet machining of metals surface integrity and texture. Wear, 210, 6(1997), 50-8.
2. Bitter, J. A study of erosion phenomena, part I. Wear, 6, (1963), 5-21.
3. Botak, Z.; Kondic, Z.; Maderic, D. Waterjet Machining. Tehnicki Vjesnik-Technical Gazette. 16, 3(2009), 97-101.
4. Gombar, M.; Hloch, S.; Radvanska, A. Traverse direction influence evaluation on average roughness at AWJ cutting. Annals of DAAAM for 2006 & Proceedings of the 17th International DAAAM Symposium - Intelligent manufacturing & automation: focus on mechatronics and robotics, 2006., 137-138.
5. M. Modelling study of metal cutting with abrasive waterjets. Transactions of the ASME, Journal of Engineering Material and Technology, 106, 1(1984), 88-100.
6. M. Optimization factors in abrasive waterjet machining. ASME J Eng Ind, 113, (1991), 9-37.
7. Hlavacek, P. et al. Measurement of Fine Grain Copper Surface Texture Created by Abrasive Water Jet Cutting. Strojarstvo, 51, 4(2009), 273-279.
8. Hloch, S. et al. Experimental study of surface topography created by abrasive waterjet cutting. Strojarstvo. 49, 4(2008), 303-309.
9. Hloch, S.; Valícek, J.; Simkulet, V. Estimation of the smooth zone maximal depth at surfaces created by Abrasive Waterjet. International Journal of Surface Science and Engineering. 3, 4(2009), 347-359. DOI: 10.1504/IJSURFSE.2009.027420.
10. Chen, F. L.; Siores, E. The effect of cutting jet variation on striation formation in abrasive water jet cutting. International Journal of Machine Tools & Manufacture. 41, (2001), 1479-1486.
11. Kulekci, K. M. Processes and apparatus developments in industrial waterjet applications. International Journal of Machine Tools & Manufacture. 42, (2002), 1297-1306. DOI: 10.1016/S0890-6955(02)00069-X
12. Kusnerova, M. et al. Derivation and Measurement of the Velocity Parameters of Hydrodynamics Oscillating System, Strojarstvo. 50, 6(2008), 375-379.
13. Radvanska, A. et al. Technical Possibilities of Noise Reduction in Material Cutting by Abrasive Water-jet. Strojarstvo. 51, 4(2009), 347-354.
14. Valicek, J. et al. An investigation of surfaces generated by abrasive waterjets using optical detection. Strojniski vestnik- Journal of mechanical engineering. 53, 4 (2007), 224-232.
15. Valícek, J. et al. Experimental analysis of irregularities of metallic surfaces generated by abrasive waterjet. International Journal of Machine Tools and Manufacture. 47, 11(2007), 1786-1790. DOI:10.1016/j.ijmachtools.2007.01.004.
16. Valícek, J.; Hloch, S.; Kozak, D. Surface geometric parameters proposal for the advanced control of abrasive waterjet technology. The International Journal of Advanced Manufacturing Technology. 41, 3-4(2009), 323-328. DOI: 10.1007/s00170-008-1489-2.
17. Valícek, J.; Hloch, S. Optical measurement of surface and topographical parameters investigation created by abrasive waterjet. International Journal of Surface Science and Engineering. 3, 4(2009), 360-373. DOI: 10.1504/IJSURFSE.2009.027421.
18. Valícek, J.; Hloch, S. Using the acoustic sound pressure level for quality prediction of surfaces created by abrasive waterjet. The International Journal of Advanced Manufacturing Technology. 48, 1-4(2010), 193-203. DOI: 10.1007/s00170-009-2277-3.
19. Misik, L.; Hloch, S.; Vagaska, A. et al. Side milling factors analysis affecting the surface irregularities of high-grade steel E295. Tehnicki vjesnik-Technical Gazette, 15, 2(2008), 19-23.
20. Harnicárová, M.; Zajac, J.; Stoic, A. Comparison of different material cutting technologies in term of their impact on the cutting quality of structural steel, Tehnicki Vjesnik-Technical Gazette, 17, 3(2010), 371-376.
21. Jurisevic, B.; Coray, P. S.; Heiniger, K. C.; Junkar, M. Tool Formation Process in Abrasive Water Jet Machining. MIT'2003 University of Ljubljana. 2003.
22. Lebar, A.; Junkar, M. Simulation of abrasive water jet cutting process. Modelling Simul. Mater. Sci. Eng. 12, (2004), 1159-1170.
23. Mason, R. L.; Gunst, R. F.; Hess, J. L. Statistical design and analysis of experiments. Second edition. Wiley-Interscience. A John Willey & Sons Publication, New Jersey, 2003., ISBN 0-471-37216-1.
24. Montgomery, D. C. Design and analysis of experiments. 5th. edition, Hamilton Printing Company, 2001., ISBN 0-471-31649-0.