Complete characterization of wheat straw (Triticum aestivum PBW-343 L. Emend. Fiori & PAOL.) - A renewable source of fibres for pulp and paper making

BioResources

Volumn 6, Issue 1, 2011, Pages 154-177

  Singh, Shalini ^a   Dutt, Dharm ^a   Tyagi, C H ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY ROORKEE   (India)

Author keywords

Anatomy; Morphology; Paper properties; Proximate chemical analysis; Scanning electron microscopy; Soda pulping; Triticum aestivumPBW 343 (Wheat straw)

Indexed keywords

ANATOMY; PAPER PROPERTIES; PROXIMATE CHEMICAL ANALYSIS; SCANNING ELECTRONS; SODA PULPING; TRITICUM;

CELLS; CHEMICAL ANALYSIS; FIBERS; PAPERMAKING; PULP; PULP REFINING; SCANNING ELECTRON MICROSCOPY;

PULP COOKING;

ANATOMY; BAGASSE; CELLS; EUCALYPTUS TERETICORNIS; HEMICELLULASE; INDIA; KAPPA NUMBER; RENEWABLE RESOURCES; RICE STRAW; WHEAT STRAW;

EUCALYPTUS; EUCALYPTUS TERETICORNIS; TRITICUM; TRITICUM AESTIVUM;

EID: 79953755614     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: None     Document Type: Article

References (68)

1. Akhtar, R. S., (2000). "Studies on pulping and bleaching of Poplar deltoides, PhD Thesis, University of Roorkee, India.
2. Agnihotri, S., Dutt, D., and Tyagi, C. H. (2010). "Complete characterization of bagasse of early species of Saccharum officinerun-Co 89003 for pulp and paper making," BioResources 5(2), 1197-1224.
3. Alcaide, L. J., Baldovin, F. L., and Heranz, J. L. F. (1993). "Evaluation of agricultural residues for paper manufacture," Tappi J. 76(3), 169-173.
4. Anonymous, (1996). "Basic properties of papermaking fibres and fibre fines important to wet end chemistry," In: Scott, W. E., (Ed.), Principles of Wet End Chemistry, Tappi press, Atlanta GA, 11-17.
5. Anonymous, (2002). "Preparation of monograph of different nonwood raw materials used by Indian Paper Industry," CESS Report published by CPPRI.
6. Anonymous, (2005a). "Statistics of the Indian paper industry; Paper, paperboard and newsprint," A Report by CPPRI, pp 3-23.
7. Anonymous, (2005b). "Solid biofuels- Determination of total amount of carbon hydrogen and nitrogen- Instrumental methods," DD CEN/TS 15104.
8. Anonymous, (2007). "TAPPI Test Methods," Standard Methods for Pulp and Paper, Technical Association of Pulp and Paper Ind., TAPPI Press, Technology Park, P.O. box 105113, Atlanta, GA-330348-5113, USA.
9. Buchanan, B. B., Gruissem, W., and Jones, R. L. (2000). "Biochemistry and molecular biology of plants," (1st Edn.), American Society of Plant Physiologists, Rockville, MD.
10. Chand, R., Arun, B., and Singh G. (2003). "Wheat improvement in eastern and warmer regions of India: Conventional and non-conventional approaches," A compendium of the training program (26-30 December, 2003), NATP project, (ICAR), BHU, Varanasi, India.
11. Demirbas, A. (1997). "Calculation of higher heating values of biomass fuels," Fuel 76, 431-434.
12. Deniz, İ. (1994). "Bǔgday Saplari{dotless}ni{dotless}n (Triticum aestivum L.)," In: Ön desilikasyonu ve bu işlemin soda-oksijen kagi{dotless}t hamurlari{dotless} üzerine etkisi, Doktora Tezi, KTÜ Orman Fak., 201 s.
13. Dutt, D. (1994). "Pulping studies on Cannabis sativa and Ipomea carnea," Ph.D. Thesis, University of Roorkee, India.
14. Dutt, D., Garg, A. P., Tyagi, C. H., Upadhyay, A. K., and Upadhyay, J. S. (2007). "Biosoda-ethanol-water (BIO-SEW) delignification of lignocellulosic residues of Cymbopogon martini with Phanerochaete chrysosporium," J. Cellulose Chem. Technol. 41 (2-3), 161-174.
15. Dutt, D., and Tyagi, C. H., (2010a). "Studies on Ipomea carnea and Cannabis sativa as an alternate pulp blend for softwood: Optimization of soda pulping process," J. Sci. Ind. Res. 69 (6), 460-467.
16. Dutt, D., Tyagi, C. H., Agnihotri, S., Kumar, A., and Siddhartha, (2009a). "Alkoxygen and alkoxygen-AQ delignification of Ipomea carnea and Cannabis sativa," Indian J. Chem. Technol. 16(6), 523-528.
17. Dutt, D., Tyagi, C. H., Agnihotri, S., Kumar, A., and Siddhartha, (2010d). "Bio-soda pulping of lignocellulosic residues of palma rosa grass: An attempt towards energy conversion," Indian J. Chem. Technol. 17(1), 60-70.
18. Dutt, D., Tyagi, C. H., and Malik, R. S., (2007b). "Studies on effect of growth factor on morphological, chemical and pulp and paper making characteristics and its impact on fluff generation," Indian J. Chem. Technol. 14 (6), 626-634.
19. Dutt, D., and Upadhyaya, J. S. (1994). "Studies on alkoxygen and alkoxygenanthraquinone delignification of Ipomea carnea," Research and Industry 39 (9), 202-208.
20. Dutt, D., Upadhyaya, J. S., Malik, R. S., and Tyagi, C. H., (2004). "Studies on pulp and paper-making characteristics of some Indian non-woody fibrous raw materials: Part-II," J. Sci. Ind. Res. 63(2), 58-67.
21. Dutt, D., Upadhyaya, J. S., Malik, R. S., and Tyagi, C. H., (2005). "Studies on pulp and paper-making characteristics of some Indian non-woody fibrous raw materials: Part-I," J. Cellulose Chem. Technol. 39(1-2), 115-128.
22. Dutt, D., Upadhyaya, J.S., Singh, B., and Tyagi, C. H., (2009b). "Studies on Hibiscus cannabinus and Hibiscus sabdariffa as an alternative pulp blend for softwood: An optimization of kraft delignification process," Ind. Crops Products 29, 16-26.
23. Dutt, D., Upadhyaya, J. S., Tyagi, C. H., and Kumar, A., (2008). "Studies on Ipomea carnea and Cannabis sativa as an alternative pulp blend for softwood: An optimization of kraft delignification process," Ind. Crops Products 28, 128-136.
24. Dutt D., Upadhyaya, J. S., and Tyagi, C. H., (2010b). "Studies on Hibiscus cannabinus, Hibiscus sabdariffa and Cannabis sativa pulp to be a substitute for softwood pulp-Part 1: AS-AQ delignification process," BioResources 5(4), 2123-2136.
25. Dutt D., Upadhyaya, J. S., and Tyagi, C. H. (2010c). "Studies on Hibiscus cannabinus, Hibiscus sabdariffa and Cannabis sativa pulp to be a substitute for softwood pulp-Part 2: SAS-AQ and NSSC-AQ delignification process," BioResources 5(4), 2137-2152.
26. Kaur, H., Dutt, D., and Tyagi, C. H. (2011). "Optimization of soda pulping process of ligno-cellulosic residues of lemon and sofia grasses produced after steam distillation," BioResources 6(1), 103-120.
27. Erǒglu, H., and Utsa, M. (1989). "Oxygen bleaching of soda-oxygen wheat straw pulp," TAPPI Non-wood Plant Fibre Pulping, Progress Report No. 19, pp. 89-94.
28. Erǒglu, H., and Deniz, İ. (1998). "O2-NaOH pulping of predesilicated wheat straw (Triticum aestivum L.)," Inpaper Int. 2 (5), 14-20.
29. FAO (2004) "Statistical database," www.fao.org. Verified 4 January, 2007 Fischer RA (1985).
30. Flynn, B. (2007). "Shape of things to come," Pulp Paper Intl. 12, 1.
31. Gabriel, B. L. (1982). Biological Scanning Electron Microscopy, Von Nostrand Reinhold Company, New York, Toronto, London, Melbourne.
32. Goyal, S. K., and Ray, A. K. (1989). "Economic comparison of soda and soda-AQ pulping processes for cereal straws," Tappi Pulping Conference, Seattle, 775-780.
33. Guo, S., Heijnesson-Hultén, A., Basta, J., and Greschik, T. (2009). "Pulp and fiber characterization of wheat straw and eucaluptys pulp - A comparison," BioResources 4(3), 1006-1016.
34. Gupta, R. K., (2004). "Quality of Indian wheat and infrastructure for analysis," In: Breeding Crops for Reduced-Tillage Management in the Intensive, Rice-Wheat Systems of South Asia, Euphytica 153, 135-151
35. Han, J. S., Mianowski, T., and Lin, Y. (1999). "Validity of plant fibre length measurement - A review of fibre length measurement based on kenaf as a model," In: Sellers, T., Reichert, N. A., (eds.), Kenaf Properties, Processing and Products, Mississippi State University, 149-167.
36. Hegbom, L., (1992). "Structural aspects of sugar-cane bagasse from a paper-making point of view: A light microscopic study," Second international non-wood fibre pulping and papermaking conference proceedings, Shanghai International Trade Centre, Shanghai, 657-672.
37. Hes, C. Y., and Kuo, M. L. (1988). "Influence of extractives on wood gluing and finishing - A review," Forest Prod. J. 38, 52-56.
38. Hinrichs, D. D. (1967). "The effect of kraft pulping variables on delignification," Tappi J. 50 (4), 173-175.
39. Hurter, R. W. (1997) "Non-wood plant fibre characteristics," In: TAPPI 1997 Short Course Notes, TAPPI, Atlanta, USA, pp. 1-11.
40. Ilvasasslo-Pfäffli, M. S. (1995). Fibre Atlas, Identification of Papermaking Fibres, Springer, New York.
41. Jacobs, R. S. (1999). "The Paper making properties of Washington state wheat straw," PhD, University of Washington, Graduate School, UMI Number 9936427, USA.
42. Kleinert, T. N. (1965). "Discussion of results and the principles of rapid delignification, Part-VI of a series of alkaline pulping studies," Tappi J. 48 (8), 447-451.
43. Lal, M., Dutt, D., Tyagi, C. H., Siddarth, and Upadhyaya, J. S. (2010). "Characterization of Anthocephalus cadamba and its delignification by kraft pulping," Tappi J. 9(3), 30-37.
44. Ljusgren, I., Wiberg, B., Tubek Lindblom, A., and Persson, T. (2006). "Papermaking potentialof Scandinavian softwood pulp together with non-wood pulp," In: New Technologiesin Non-wood Fiber Pulping and Papermaking, 5th INWFPPC, Guangzhou, China, pp. 281-286.
45. Loxton, C., and Hague, J. (1996). "Utilization of agricultural crop materials in panel products," In: Proceedings, No.7286 the Use of Recycled Wood and Paper in Building Applications, Forest Products Society, Madison, WI, pp. 190-192.
46. Maiti, R. (1997). World Fibre Crops, Science Publishers, 105-108.
47. Malik, R. S., Dutt, D., Tyagi, C. H., Jindal, A. K., and Lakharia, L. K. (2004). "Morphological, anatomical and chemical characteristics of Leucaena leucocephala and its impact on pulp and paper making properties," J. Sci. Ind. Res. 63(2), 125-133.
48. Marton, J., and Marton, T. (1980). "Wet end starch: Adsorption of starch on cellulosic fibres," Tappi J. 63 (4), 87-91.
49. Nagarajan, S. (2005). "Can India produce enough wheat even by 2020?" Curr. Sci. 89, 146-147.
50. Nevell, T. P., and Zeronian, S. H. (1985). "Cotton fibres," In: Cellulose Chemistry and its Applications, John Wiley & Sons, New York, Halsted Press, 552.
51. Nguyen, T., and Johns, W .E. (1979). "The effects of aging and extractives on the surface free energy of Douglas-fir and red wood," Wood Sci. Technol. 13, 29-40.
52. Nieschlag, H. J., Nelson, G. H., Wolff, J. A., and Purdue, R. E. (1960). "A search for new fibre crops," Tappi J. 43 (3), 193-201.
53. Nussbaumer, T., (2002). "Combustion and co-combustion of biomass," In: Proceedings of the 12th European Biomass Conference, Vol. 1, pp. 31-37, ISBN: 88900442-5-x.
54. O'Brien, J. (2006). "Paper demand continues to grow," Paper Age 122 (6), 1.
55. Ogbonnaya, C. I., Roy-Macauley, H., Nwalozie, M. C., and Annerose, D. J. M. (1997). "Physical and histochemical properties of kenaf (Hibiscus cannabinus L.) grown under water deficit on a sandy soil," Ind. Crops Products 7, 9-18.
56. Payton, J. H., and Canaris, N. M. (1997). "Bleaching compositions and processes employing sulfamates and polyaminocarboxylic acids - US Patent," http://www.patentstorm.us/patents/5645688.
57. Pillow, M. Y., Chidester, G. H., and Bray, M. W. (1941). "Effect of wood structure on properties of sulphate and sulphite pulps from loblolly pine," South Pulp and Paper J., 4(7), 6.
58. Reddy, N., and Yang, Y. (2005). "Biofibres from agricultural by products for industrial applications," Trends in Biotechnology 23(1), 22-27.
59. Rydholm, S. A. (1965). Pulping Processes, Wiley, New York, Preprint 1985 (facsimile edition) Robert E. Krieger, Malabar, FL, pp. 1270.
60. Sauter, S. L. (1996). "Developing composites from wheat straw," In: Proceedings, 30th International Particleboard/Composite materials Symposium, Washington State University, Washington, USA, pp. 197-214.
61. SCAN Test Methods, (1978). "SCAN-C9:62-Determination of ash and silica," Scandinavian Pulp, Paper and Board Committee, Sweden.
62. Scott, W. E. (1996). "Basic properties of papermaking fibres and fibre fines important to wet end chemistry," In: Scott, W.E., (Ed.), Principles of Wet End Chemistry, TAPPI Press, Atlanta GA, 11-17.
63. Tandon, R., Gupta, A., Kulkarni, A. G., and Panda, A., (1989). "Properties of black liquors from pulping of nonwood raw materials," In: International Seminar and Workshop on Desilication, Proceedings of the International Seminar, Cochin, 23-35.
64. Thykesson, M., Sjöberg, L.-A., and Ahlgren, P. (1998). "Paper properties of grass and straw pulps," Ind. Crops Prod. 7, 351-362.
65. Tyagi, C. H., Dutt, D., Pokharel, D., and Malik, R. S. (2004). "Studies on soda and soda AQ pulping of Eulaiopsis binata," Indian J. Chem. Technol. 11(1), 127-134.
66. Upadhyaya, J. S., Dutt, D., Singh, B., and Tyagi, C. H., (2008). "Studies on Hibiscus cannabinus and Hibiscus sabdariffa as an alternative pulp blend for softwood: An optimization of soda pulping process," Indian J. Chem. Technol. 15(3), 277-286.
67. Watson, P., and Garner, A. (1997). "The opportunities for producing pulp from agricultural residues in Alberta," In: A Review of Non-Wood Pulping Technologies, Pulp and Paper Research Institute of Canada, Miscellaneous Report, MR 355.
68. Young, R. A. (1976). "Wettability of wood pulp fiber," Wood Fiber Sci. 8, 120-128.