Influence of torrefaction on some chemical and energy properties of maritime pine and pedunculate OAK

BioResources

Volumn 6, Issue 2, 2011, Pages 1204-1218

  Pierre, Floran ^a   Almeida, Giana ^a   Brito, José Otávio ^b   Perré, Patrick ^a  

^a LERFoB   (France)

^b UNIVERSITY OF SÃO PAULO   (Brazil)

Author keywords

Biomass; Chemical analysis; Energy yield; Heating value; Proximate analysis; Torrefaction

Indexed keywords

ANALYTICAL EXPRESSIONS; CHEMICAL COMPOSITIONS; COMBINED EFFECT; DEGRADATION OF THE MATERIAL; EFFECTS OF TEMPERATURE; ENERGY ANALYSIS; ENERGY PROPERTY; ENERGY YIELD; FIXED CARBONS; HEATING VALUE; HIGHER HEATING VALUE; MARITIME PINES; MASS LOSS; PEDUNCULATE OAK; PINUS PINASTER; PROXIMATE ANALYSIS; QUERCUS ROBUR; SOLUBLE MATERIALS; STANDARD METHOD; TORREFACTION; TREATMENT DURATION; VOLATILE MATTERS; WOOD ENERGY;

CALORIFIC VALUE; CHEMICAL PROPERTIES; CHEMICALS; DEGRADATION; ENERGY MANAGEMENT; HEATING; TEMPERATURE;

CHEMICAL ANALYSIS;

PINUS PINASTER; QUERCUS ROBUR;

EID: 79953754515     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: None     Document Type: Article

References (37)

1. Almeida, G., Brito, J. O., and Perré, P. (2009). "Changes in wood-water relationship due to heat treatment assessed using micro-sample of Eucalyptus," Holzforshung 63(1), 80-88.
2. Almeida, G., Brito, J. O., and Perré, P. (2010). "Alterations of energy properties of eucalyptus wood and bark submitted to torrefaction: the potential of mass loss as a synthetic indicator," Bioresource Technol. 101, 9778-9784.
3. Agrawal, K. R. (1988). "Kinetics of reactions involved in pyrolysis of cellulose. I. The three reaction model," Canadian J. Chem. Eng. 66, 403-412.
4. Associação Brasileira de Normas Técnicas (ABNT). (1986). "Carvão vegetal - Análise imediata," NBR 8112.
5. ASTM Standard. D5865. (2007). "A standard test method for gross calorific value of coal and coke," ASTM International, West Conshohocken, PA, DOI: 10.1520/D5865-07.
6. Avat, F. (1993). "Contribution à l'étude des traitements thermiques du bois (20-300°C): Transformations chimiques et caractérisations physico-chimiques," Ph-D Thesis, Ecole Nationale Supérieure des Mines de Paris et Ecole Nationale Supérieure des Mines de Saint-Etienne.
7. Ballesteros, I., Olivia, J. M., Navarro, A. A., Gonzalez, A., Carrasco, J., and Ballesteros, M. (2000). "Effect of chip size on steam explosion pretreatment of softwood," Applied Biochemistry and Biotechnology 84-86, 97-109.
8. Bekta, P., and Niemz, P. (2003). "Effect of high temperature on the change colour, dimensional stability and mechanical properties of spruce wood," Holzforshung 57, 539-546.
9. Bergman, P. C. A., Boersma, A. R., Kiel, J. H. A., Prins, M. J., Ptasinski, K. J., and Janssen, F. J. J. G. (2005). "Torrefaction for entrained-flow gasification of biomass," Report ECN-C-05-067, The Netherlands. 50 pp.
10. Bourgeois, J. P. (1989). "Thermocondensed lignocelluloses material, and a method and an oven for obtaining it," US Patent 4,816,572.
11. Brito, J. O., Silva, F.G., Leão, M. M., and Almeida, G. (2008). "Chemical composition changes in eucalyptus and pinus woods submitted to heat treatment," Bioresource Technol. 99, 8545-8548.
12. Carvalho, A. (1960). "Alguns inconvenientes do azulamento na madeira de P. Pinaster com vista ao seu aproveitamento em pasta para papel," Separata das publicações da Direcção Geral dos Serviços Florestais e Aquicolas 27.
13. Colin, J. (2007). "Etude de la pyrolyse ménagée du bois: Mise au point d'un four de traitement thermique, essais expérimentaux et utilisation d'un code numérique de simulation," Master Thesis, Université Henri Poincaré, Nancy 1 et AgroParisTech ENGREF.
14. Demirbas, A. (1997). "Calculation of higher heating values of biomass fuels," Fuel 76(5), 431-434.
15. Demirbas, A. (2001). "Relationship between lignin contents and heating values of biomass," Energy Conversion and Management 42, 183-188.
16. Esteves, B., Velez Marques, A., Domingos, I., and Pereira, H. (2007). "Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood," Wood Sciences and Technology 41, 193-207.
17. Govin, A., Repellin, V., Guyonnet, R., Rolland, M., and Duplan, J. L. (2009). "Effect of torrefaction on grinding energy requirement for thin wood particle production," Récents Progrès en Genie des Procédés 98, 756(1)-756(6).
18. Hakkou, M., Pétrissans, M., Gérardin, P., and Zoulalian, A. (2006). "Investigations of the reasons for fungal durability of heat-treated beech wood," Polymer Degradation and Stability 91, 393-397.
19. Kamdem, D. P., Pizzi, A., and Jermannaud, A. (2002). "Durability of heat-treated wood," Holz als Roh und Werkstoff 60, 1-6.
20. Kollman, F., and Fengel, D. (1965). "Changes in the chemical composition of wood by thermal treatment," Holz als Roh und Werkstoff 23, 461-468.
21. Markussen, T., Fladung, M., Achere, V., Favre, J. M., Faivre-Rampant, P., Aragones, A., Da Silva Perez, D., Harvengt, L., Espinel, S., and Ritter, E. (2002). "Identification of QTLs controlling growth, chemical and physical wood property traits in Pinus pinaster (Ait.)," Silvae Genetica 52(1), 8-15.
22. Monties, B. (1987). "Composition chimique du bois de chêne: Composés phénoliques, relations avec quelques propriétés physiques et chimiques susceptibles d'influencer la qualité des vins et des eaux-de-vie," Connaissances de la Vigne et du Vin 21, 169-190.
23. Parikh, J., Channiwala, S. A., and Ghosal, G. K. (2005). "A correlation for calculating HHV from proximate analyses of solid fuels," Fuel 84, 487-494.
24. Repelin, V. (2006). "Optimisation des parameters durée et temperature d'un traitement thermique du bois. Modifications des proprieties d'usage du bois en relation avec les modifications physico-chimiques et ultrastructurales occasionnées par le traitement thermique," Ph-D Thesis, Ecole nationale supérieure des mines de Saint-Etienne et Université Jean Monnet de Saint-Etienne.
25. Rousset, P., Turner, I., Donnot, A., and Perré P. (2006). "Choix d'un modèle de pyrolyse ménagée du bois à l'échelle de la micro-particule en vue de la modélisation macroscopique, " Annals of Forest Sci. 63, 213-229.
26. Rowell, R. M. (2005). "Chemical modification of wood," Handbook of Engineering Biopolymers, Hanser Publisher, Munich, 674-691.
27. SAS Institute. (2002) SAS 9.0 Ed. SAS Institute, Inc., Cary, NC.
28. Sivonem, H., Maunu, S., Sundholm, F., Jämsä, F., and Viitiameni, P. (2002). "Magnetic resonnance studies of thermally modified wood," Holzforschung 56, 648-654.
29. Schenkel, Y., Bertaux, P., Vanwijnsberghe, S., and Carré, J. (1997). "Une évaluation de la technique de la carbonisation en meule," Biotechnol. Agron. Soc. Environ. 1, 113-124.
30. TAPPI standard (1994). T 204. OM-88, "Acid-insoluble lignin in wood and pulp."
31. TAPPI standard (1994). T 204. OM-88, "Solvent extractives of wood and pulp."
32. Tjeerdsman, B., Boonstra, M., Pizzi, A., Tekely, P., and Militz, H. (1998). "Characterisation of thermally modified wood: Molecular reasons for wood performance improvement," Holz Roh-Werkst 63, 102-111.
33. Thomas, R. J. (1977). "Wood: Structure and chemical composition," ACS Symposium Series 43, 1-23.
34. Turner, I. W., Rousset, P., Rémond, R., and Perré P. (2010). "An experimental and theoretical investigation of the thermal treatment of wood in the range 200-260°C," Int. J. Heat Mass Transfer 53,715-725.
35. Unsal, O., and Ayrilmis, N. (2005). "Variations in compression strength and surface roughness of heat-treated Turkish river red gum (Eucalyptus camaldulensis) wood," Journal of Wood Science 51, 405-409.
36. Weiland, J. J., and Guyonnet, R. (2003). Study of chemical modifications and fungi degradation of thermally modified wood using DRIFT spectroscopy," Holz als Roh und Werkstoff 61, 216-220.
37. Yildiz, S., Gezer, E. D., and Yildiz, U. C. (2005). "Mechanical and chemical behavior of spruce wood modified by heat," Building and Environment 41, 1762-1766.