Characterisation of plasma-sprayed SrFe12O19 coatings for electromagnetic wave absorption

Journal of the European Ceramic Society

Volumn 31, Issue 8, 2011, Pages 1439-1449

  Bobzin, K ^a   Bolelli, G ^b   Bruehl, M ^a   Hujanen, A ^c   Lintunen, P ^c   Lisjak, D ^d   Gyergyek, S ^d   Lusvarghi, L ^a  

^a RWTH AACHEN UNIVERSITY   (Germany)

^b UNIVERSITY OF MODENA AND REGGIO EMILIA   (Italy)

^c VTT TECHNICAL RESEARCH CENTRE OF FINLAND   (Finland)

^d JO EF STEFAN INSTITUTE   (Slovenia)

Author keywords

Atmospheric plasma spraying; Ferrites; Functional applications; Hard magnets; Magnetic properties

Indexed keywords

ATMOSPHERIC PLASMA SPRAYING; CHARACTERISATION; COHESIVE STRENGTH; DENSE COATING; ELECTROMAGNETIC WAVE ABSORBER; FEEDSTOCK POWDERS; FUNCTIONAL APPLICATIONS; HARD MAGNETS; HEXAFERRITES; POROUS COATINGS;

ABSORPTION; AGGLOMERATION; CRYSTALLINE MATERIALS; ELECTROMAGNETIC WAVE ABSORPTION; ELECTROMAGNETIC WAVES; ELECTROMAGNETISM; FERRITE; FERRITES; MAGNETIC PROPERTIES; MAGNETS; PLASMA JETS; PLASMA SPRAYING; PLASMAS; PROTECTIVE COATINGS; RAW MATERIALS; SINTERING;

GYRATORS;

EID: 79953324699     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2011.02.003     Document Type: Article

References (55)

1. Koledintseva M.Y., Kitaytsev A.A., Shinkov A.A. Microwave filtering of unwanted oscillations on base of hexagonal ferrite composite thick films. Proceedings of the IEEE international symposium on electromagnetic compatibility, vol. 1 1998, 578-582.
2. Lebed B.M., Voronkov V.D. State of the art millimeter and sub-millimeter wave ferrite components and devices. Proceedings of the 26th European Microwave Conference, vol. 2 1996, 816-822.
3. Shin J.Y., Oh J.H. The microwave absorbing phenomena of ferrite microwave absorbers. IEEE Trans Magn 1993, 29:3437-3439.
4. Amano M., Kotsuka Y. A method of effective use of ferrite for microwave absorber. IEEE Trans Microwave Theory Tech 2003, 51:238-245.
5. Smit J., Wijn H.P.J. Ferrites, Chapter IX 1959, Philips' Technical Library, Eidenhoven.
6. 1.2 type hexaferrite. J Phys IV France 1998, 8. Pr2-401-4.
7. 19 (Me=Zn, Co). J Magn Magn Mater 1991, 101:170-172.
8. Zhou X.Z., Morrish A.H., Yang Z., Zeng H.-X. Co-Sn substituted barium ferrite particles. J Appl Phys 1994, 75:5556-5558.
9. Du Pre F.K., De Bitetto D.J., Brockman F.G. Magnetic materials for use at high microwave frequencies (50-90kMc/sec). J Appl Phys 1958, 29:1127-1128.
10. Sugimoto S., Haga K., Kagotani T., Inomata K. Microwave absorption properties of Ba-M type ferrite produced by a modified coprecipitation method. J Magn Magn Mater 2005, 290/291:1188-1191.
11. 19. J Appl Phys 2002, 92:3902-3907.
12. Heimann R.B. Applications of plasma-sprayed ceramic coatings. Key Eng Mater 1996, 122-124:399-442.
13. Herman H., Sampath S., McCune R. Thermal spray: current status and future trends. MRS Bull 2000, 25(7):17-25.
14. Bartuli C., Cipri F., Valente T. Thermal spraying and the fabrication of coatings with tailored electro-magnetic properties. Inorg Chim Acta 2008, 361:4077-4088.
15. 4 films fabricated by thermal spray. J Appl Phys 2003, 93:7498-7500.
16. Yan Q.Y., Gambino R.J., Sampath S., Huang Q. Neutron diffraction and ferromagnetic resonance studies on plasma-sprayed MnZn ferrite films. J Appl Phys 2005, 97:0033902.
17. Yan Q., Gambino R.J., Sampath S., Lewis L.H., Li L., Baumberger E., et al. Effects of zinc loss on the magnetic properties of plasma-sprayed MnZn ferrites. Acta Mater 2004, 52:3347-3353.
18. McCartney D.G., Zhang D., Yellup J.Y., Brühl M., Bobzin K., Richardt K., et al. Novel NiZn-ferrite powders and coatings for electromagnetic applications. Expanding thermal spray performance to new markets and applications-proceedings of the 2009 international thermal spray conference 2009, 818-823. ASM International, Materials Park, OH, USA. B.R. Marple, M.M. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima, G. Montavon (Eds.).
19. 19 (BaM) films. Plasma Chem Plasma Process 2003, 23:609-626.
20. Lisjak D., Bobzin K., Richardt K., Bégard M., Bolelli G., Lusvarghi L., et al. Preparation of barium hexaferrite coatings using atmospheric plasma spraying. J Eur Ceram Soc 2009, 29:2333-2341.
21. Lisjak D., Makovec D., Gyergyek S., Hujanen A., Lintunen P., Varis T., et al. The preparation of barium hexaferrite coatings using HVOF. J Am Ceram Soc 2009, 92:818-824.
22. Bégard M., Bobzin K., Bolelli G., Hujanen A., Lintunen P., Lisjak D., et al. Thermal spraying of Co,Ti-substituted Ba-hexaferrite coatings for electromagnetic wave absorption applications. Surf Coat Technol 2009, 203:3312-3319.
23. Bobzin K., Schlaefer T., Bégard M., Bruehl M., Bolelli G., Lusvarghi L., et al. Development of Ba-hexaferrite coatings for electromagnetic wave absorption applications. Surf Coat Technol 2010, 205:1015-1020.
24. Hewlett-Packard Product Note 8510-3; 1985.
25. Arcondéguy A., Grimaud A., Denoirjean A., Gasgnier G., Huguet C., Pateyron B., et al. Flame-sprayed glaze coatings: effects of operating parameters and feedstock characteristics onto coating structures. J Therm Spray Technol 2007, 16:978-990.
26. Bolelli G., Rauch J., Cannillo V., Killinger A., Lusvarghi L., Gadow R. Investigation of high-velocity suspension flame sprayed (HVSFS) glass coatings. Mater Lett 2008, 62:2772-2775.
27. Guo H.B., Vaßen R., Stöver D. Atmospheric plasma sprayed thick thermal barrier coatings with high segmentation crack density. Surf Coat Technol 2004, 186:353-363.
28. Matejicek J., Sampath S., Gilmore D., Neiser R. In situ measurement of residual stresses and elastic moduli in thermal sprayed coatings: Part 2: Processing effects on properties of Mo coatings. Acta Mater 2003, 51:873-885.
29. 19). J Am Ceram Soc 1964, 47(11):579-581.
30. Fauchais P., Fukumoto M., Vardelle A., Vardelle M. Knowledge concerning splat formation: an invited review. J Therm Spray Technol 2004, 13:337-360.
31. Wang X.Y., Zhang H., Zheng L.L., Sampath S. An integrated model for interaction between melt flow and non-equilibrium solidification in thermal spraying. Int J Heat Mass Transfer 2002, 45:2289-2301.
32. 3. J Solid State Chem 2009, 182:2409-2416.
33. Li L., Kharas B., Zhang H., Sampath S. Suppression of crystallization during high velocity impact quenching of alumina droplets: observations and characterization. Mater Sci Eng A 2007, 456:35-42.
34. 3. Mater Sci Eng B 2001, 87:23-30.
35. 3 coatings. Ceram Int 2010, 36:2155-2162.
36. 3 system prepared by rf-reactive sputtering. J Appl Phys 1991, 69:3663-3669.
37. Kim S.-G., Wang W.-N., Iwaki T., Yabuki A., Okuyama K. Low-temperature crystallization of barium ferrite nanoparticles by a sodium citrate-aided synthetic process. J Phys Chem C 2007, 111:10175-10180.
38. Zhang H.Y., Gu B.X., Zhai H.R., Miao Y.Z., Lu M. New phenomena in FMR and EPR studies of amorphous oxide films and their crystallization. J Magn Magn Mater 1995, 139:115-118.
39. 3 nanocrystalline powders by auto-combustion of citric acid gel. Asia-Pac J Chem Eng 2009, 4:518-521.
40. 3-δ (x=0.2 and 0.3) membrane. Desalination 2009, 245:559-569.
41. 3-δ (x=0, 0.5 and 1) oxide. J Alloys Compd 2009, 481:455-461.
42. de Faria D.L.A, Venâncio Silva S., de Oliveira M.T. Raman microspectroscopy of some iron oxides and oxyhydroxides. J Raman Spectrosc 1997, 28:873-878.
43. Maslar J.E., Hurst W.S., Bowers W.J., Hendricks J.H., Aquino M.I. In situ raman spectroscopic investigation of aqueous iron corrosion at elevated temperatures and pressures. J Electrochem Soc 2000, 147:2532-2542.
44. Da Cunha Belo M., Walls M., Hakiki N.E., Corset J., Picquenard E., Sagon G., et al. Composition, structure and properties of the oxide films formed on the stainless steel 316L in a primary type PWR environment. Corros Sci 1998, 40:447-463.
45. Bianchi L., Denoirjean A., Blein F., Fauchais P. Microstructural investigation of plasma-sprayed ceramic splats. Thin Solid Films 1997, 299:125-135.
46. 19 hexagonal ferrite analyzed by Mössbauer spectrometry and Raman spectroscopy. J Magn Magn Mater 2002, 242/245:1405-1407.
47. 19 with high coercitivity by hydrolysis of metal-organic complexes. IEEE Trans Magn 1987, 23:3134-3136.
48. Fang J., Wang J., Gan L.M., Ng S.C., Ding J., Liu X. Fine strontium ferrite powders from an ethanol-based microemulsion. J Am Ceram Soc 2000, 83:1049-1055.
49. Williamson R.L., Fincke J.R., Chang C.H. A computational examination of the sources of statistical variance in particle parameters during thermal plasma spraying. Plasma Chem Plasma Process 2000, 20:299-324.
50. Ang C.B., Ng H.W., Yu S.C.M., Lam Y.C. A proposed process control chart for DC plasma spraying process. Plasma Chem Plasma Process 2000, 20:325-342.
51. Fogarassy P., Gerday D., Lodini A. Agglomerated nanostructured particles disintegration during the plasma thermal spraying process. Mech Res Commun 2005, 32:221-239.
52. Fauchais P. Understanding plasma spraying. J Phys D Appl Phys 2004, 37:R86-R108.
53. Vardelle M., Vardelle A., Fauchais P., Li K.-I., Dussoubs B., Themelis N.J. Controlling particle injection in plasma spraying. J Therm Spray Technol 2001, 10:267-284.
54. Dongmo E., Wenzelburger M., Gadow R. Analysis and optimization of the HVOF process by combined experimental and numerical approaches. Surf Coat Technol 2008, 202:4470-4478.
55. Li C.-J., Liao H.-N., Gougeon P., Montavon G., Coddet C. Experimental determination of the relationship between flattening degree and Reynolds number for spray molten droplets. Surf Coat Technol 2005, 191:375-383.