Mechanical and thermal properties of nano-titanium dioxide-reinforced polyetheretherketone produced by optimized twin screw extrusion

Journal of Thermoplastic Composite Materials

Volumn 24, Issue 2, 2011, Pages 185-205

  Knör, Nicole ^a   Walter, Rolf ^a   Haupert, Frank ^a  

^a INSTITUT FÜR VERBUNDWERKSTOFFE GMBH   (Germany)

Author keywords

extrusion; mechanical and thermal properties; nanocompositesproduct development; polyetheretherketone (PEEK)

Indexed keywords

COROTATING TWIN-SCREW EXTRUDERS; DYNAMIC MECHANICAL; ENGINEERING APPLICATIONS; FILLER CONTENTS; FRACTURE SURFACES; HIGH RESOLUTION; IMPACT ENERGY; LOADED PARTS; MASTERBATCH; MATRIX; MECHANICAL AND THERMAL PROPERTIES; MECHANICAL PERFORMANCE; MULTI-PASS EXTRUSION PROCESS; NANO-SIZED PARTICLES; NANO-TITANIUM DIOXIDE; NANOCOMPOSITESPRODUCT DEVELOPMENT; POLYMER PROPERTIES; PROCESSING PARAMETERS; ROOM TEMPERATURE; SHEAR ENERGY; THEORETICAL CALCULATIONS; TIO; TWIN SCREW EXTRUSION;

DIFFERENTIAL SCANNING CALORIMETRY; EXTRUSION; FILLERS; HIGH RESOLUTION TRANSMISSION ELECTRON MICROSCOPY; IMPACT TESTING; MATERIALS PROPERTIES; MATERIALS TESTING; NANOPARTICLES; OXIDES; SCREWS; TENSILE STRENGTH; TENSILE TESTING; THERMODYNAMIC PROPERTIES; THERMOGRAVIMETRIC ANALYSIS; TITANIUM; TITANIUM DIOXIDE;

MECHANICAL PROPERTIES;

EID: 79953236314     PISSN: 08927057     EISSN: 15307980     Source Type: Journal    
DOI: 10.1177/0892705710369867     Document Type: Article

References (28)

1. BCC research study. Available at: http://www.bccresearch.com/report/ NAN031C.html (accessed June 1, 2009).
2. Gebhard, A., Knör, N., Haupert, F. and Schlarb, A.K. (2008). Nanopartikelversärkte Hochleistungsthermoplaste fur Extreme Tribologische Belastungen im Automobilbau, Tribologie + Schmierungstechnik, 55 (4). 28-32.
3. Haupert, F., Knör, N., Walter, R. and Schlarb, A.K. (2007). Optimierung der Mechanischen und Tribologischen Eigenschaften von Polyetheretherketon (PEEK)-Nanoverbundwerkstoffen durch Wollastonit- Mikropartikel, GfT, Tribologie-Fachtagung.
4. Walter, R., Haupert, F., Xian, G. and Friedrich K. (2006). Development of Nano- and Microparticle Reinforced Composites for Tribological Applications, Book of Synopsis, 117, In: 15th International Colloquium Tribology, Technische Akademie Esslingen.
5. Ng, C.B., Ash, B.J., Schadler, L.S. and Siegel, R.W. (2001). A Study of the Mechanical and Permeability Properties of Nano- and Micron-TiO2 Filled Epoxy Composites, Advanced Composites Letters, 10 (3). 101-111. (Pubitemid 33402884)
6. Knör, N., Gebhard, A., Walter R., Haupert, F. and Schlarb A.K. (2007). Structure- Property-Relationship of Nanoparticle Reinforced Polymer Composites, In: The International Conference on Structural Analysis of Advanced Materials 2007 (ICSAM), Patras, Greece.
7. Ess, J. and Hornsby, P. (1987). Twin-Screw Extrusion Compounding of Mineral Filled Thermoplastics: Dispersive Mixing Effects, Plastics and Rubber Processing and Applications, 8: 147-156. (Pubitemid 18546402)
8. Potente H., Bastian M. and Flecke J. (1999). Design of a Compounding Extruder by Means of the SIGMA Simulation Software, Advances in Polymer technology, 18: 147-170.
9. Kausch, H., Beguelin, P. and Fischer, M. (2000). Failure of Particulate Reinforced Polymers, Mechanics of Composite Materials, 36: 177-183.
10. Avella, M., Cosco, S., Lorenz, M.L., Di Pace, E., Errico, M.E. and Gentile, G. (2006). iPP Based Nanocomposites Filled With Calcium Carbonate Nanoparticles: Structure/ Properties Relationships, Macromolecular Symposium, 234: 156-162.
11. Wu, C.L., Zhang, M.Q., Rong, M.Z. and Friedrich, K. (2002). Tensile Performance Improvement of Low Nanoparticles Filled-Polypropylene Composites, Composite Science and Technology, 62: 1327-1340.
12. Wu, C.L., Zhang, M.Q., Rong, M.Z. and Friedrich, K. (2005). Silica Nanoparticles filled Polypropylene: Effects of Particle Surface Treatment, Matrix Ductility and Particle Species on the Mechanical Performance of Composites, Composite Science and Technology, 65: 635-645. (Pubitemid 40077572)
13. Leidner, J. and Woodhams, R.T. (1974). The Strength of Polymeric Composites Containing Spherical Fillers, Journal of Applied Polymer Science, 18: 1639-1654.
14. Ng, C.B., Schadler, L.S. and Siegel, R.W. (1999). Synthesis and Mechanical Properties of TiO2-Epoxy Nanocomposites, Nanostructured Materials, 12: 507-510.
15. Cho, J., Joshi, M.S. and Sun, C.T. (2006). Effect of Inclusion on Mechanical Properties of Polymeric Composites with Micro and Nano Particles, Composites Science and Technology, 66: 1941-1952. (Pubitemid 44070633)
16. Vollenberg, P. and Heikens, D. (1990). The Mechanical Properties of Chalk-Filled Polypropylene: A Preliminary Investigation, Journal of Material Science, 25: 3089-3095. (Pubitemid 20710382)
17. Wetzel, B. (2006). Mechanische Eigenschaften von Nanoverbundwerkstoffen aus Epoxydharz und Keramischen Nanopartikeln, Dissertation.
18. Burke, M., Young, R.J. and Stanford, J.L. (1993). The Relationship Between Structure and Properties in Titanium Dioxide Filled Polypropylene, Polymer Bulletin, 30: 361-368.
19. Zhu, A., Cai, A., Zhang, J., Jia, H. and Wang, J. (2008). PMMA-Grafted-Silica/PVC Nanocomposites: Mechanical Performance and Barrier Properties, Journal of Applied Polymer Science, 108: 2189-2196. (Pubitemid 351613271)
20. Mai, Y.W., Xie, X., Zhang, Q. and Yu, H. (2004). Interface Modification, Dispersion of Nanoparticles in Polymer Nanocomposites - Potential Materials in Automotive Applications, IVW-Kolloquium, 48: 13-24.
21. Hong, R., Zhang, Y., Liu, L., Wang, J., Li, H. and Zheng, Y. (2007). Surface-Modified Silica Nanoparticles for Reinforcement of PMMA, Journal of Applied Polymer Science, 105: 2176-2184. (Pubitemid 47116191)
22. Streller, R.C., Thomann, R., Torno, O. and Mülhaupt, R. (2008). Isotactic Poly(Propylene) Nanocomposites Based Upon Boehmite Nanofillers, Macromolecular Materials and Engineering, 293: 218-227. (Pubitemid 351548664)
23. Garcia, M., van Vliet, G., ten Cate, M.G., Chavez, F., Norder, B., Kooi, B., van Zyl, W.E., Verweij, H. and Blank, D.H. (2004). Large-Scale Extrusion Processing and Characterization of Hybrid Nylon-6/SiO2 Nanocomposite, Polymers for Advanced Technologies, 15: 164-172. (Pubitemid 38502772)
24. Li, G., Mai, K. and Feng, K. (2006). Plastification of Nano-CaCO3 in Polystyrene/ Nano-CaCO3 Composites, Journal of Applied Polymer Science, 99: 2138-2143.
25. Siengchin, S., Karger-Kocsis, J. and Thomann, R. (2007). Alumina-Filled Polystyrene Micro- and Nanocomposites Prepared by Melt Mixing With and Without Latex Precompounding: Structure and Properties, Journal of Applied Polymer Science, 105: 2963-2972. (Pubitemid 47168987)
26. Yao, X., Tian, X., Zheng, K., Zheng, J., Qang, R., Kang, S. and Cui, P. (2009). Preparation and Characterization of Poly(butyleneterephtalate)/Silica Nanocomposites, Polymer Engineering and Science, 49: 799-807.
27. Ge, C., Ding, P., Shi, L. and Fu, J. (2009). Isothermal Crystallization Kinetics and Melting Behavior of Poly(Ethyleneterephtalate)/Barite Nanocomposites, Journal of Polymer Science Part B: Polymer Physics, 47: 655-668.
28. Giraldo, L., Echeverri, M. and Lopez, B. (2007). Reinforcement of Polyamide 6 with Nanoparticles, Macromolecular Symposium, 258: 119-128.