A new piezoelectric energy harvesting design concept: Multimodal energy harvesting skin

IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control

Volumn 58, Issue 3, 2011, Pages 629-645

  Lee, Soobum ^a   Youn, Byeng D ^b  

^a UNIVERSITY OF MARYLAND   (United States)

^b Seoul National University   (South Korea)

Author keywords

Aircraft; Energy harvesting; Piezoelectric materials; Resistors; Skin; Vibrations

Indexed keywords

ADVANCED DESIGNS; AIRCRAFT SKIN; DESIGN CONCEPT; DESIGN RATIONALE; DESIGN STEPS; ENGINEERING SYSTEMS; EXCELLENT PERFORMANCE; EXTERNAL RESISTORS; FINITE ELEMENT; INNOVATIVE DESIGN; MATERIAL DESIGNS; MULTI-MODAL; MULTILAYERED ASSEMBLIES; OPTIMAL TOPOLOGIES; PIEZOELECTRIC ENERGY; PIEZOELECTRIC ENERGY HARVESTING; PIEZOELECTRIC LAYERS; POWER HARVESTING; POWER OUT PUT; SKIN STRUCTURE; UNIMODAL; VIBRATION MODES; VIBRATIONS; VOLTAGE PHASE;

AIRCRAFT; AIRCRAFT MATERIALS; FINITE ELEMENT METHOD; HARVESTING; MEMS; PIEZOELECTRIC DEVICES; PIEZOELECTRIC MATERIALS; PIEZOELECTRICITY; POWER TRANSFORMERS; RESISTORS; STRUCTURAL DESIGN; TOPOLOGY; VIBRATING CONVEYORS;

ENERGY HARVESTING;

EID: 79952962805     PISSN: 08853010     EISSN: None     Source Type: Journal    
DOI: 10.1109/TUFFC.2011.5733266     Document Type: Article

References (49)

1. U.S. Department of Energy, (2008, Dec. 4) ITP sensors and automation: Low-cost vibration power harvesting for wireless sensors. [Online]. Available: http://www1.eere.energy.gov/industry/sensors-automation/ pdfs/kcf- vibrationpower.pdf.
2. S. Roundy, P. K. Wright, and J. M. Rabaey, Energy Scavenging for Wireless Sensor Networks: With Special Focus on Vibrations. New York, NY: Springer, 2004.
3. P. Glynne-Jones, S. P. Beeby, and N. M. White, "Towards a piezoelectric vibration-powered microgenerator," IEE Proc. Sci. Meas. Technol., vol. 148, no. 2, pp. 68-72, 2001. (Pubitemid 32944443)
4. M. G. Silk, Ultrasonic Transducers for Nondestructive Testing: Bristol, UK: Adam Hilger, 1984.
5. T. Sterken, K. Baert, C. Van Hoof, R. Puers, G. Borghs, and P. Fiorini, "Comparative modeling for vibration scavengers," in IEEE Sensors 2004, 2004, pp. 1249-1252.
6. K. Ren, Y. Liu, X. Geng, H. F. Hofmann, and Q. M. Zhang, "Single crystal PMN-PT/epoxy 1-3 composite for energy-harvesting application," IEEE Trans. Ultrason. Ferroelectr. Freq. Control, vol. 53, no. 3, pp. 631-638, 2006.
7. N. Elvin, A. Elvin, and D. H. Choi, "A self-powered damage detection sensor," J. Strain Anal. Eng. Des., vol. 38, no. 2, pp. 115-124, 2003.
8. J. Nuffer and T. Bein, "Applications of piezoelectric materials in transportation industry," presented at Proc. Global Symp. Innovative Solutions for the Advancement of the Transport Industry (TRANSFAC), 2006.
9. (2008, Jul. 24) Analog temperature sensor. AmbioSystem LLC, Heuvelton, NY, [Online]. Available: http://www.ambiosystems.com/ index.php/Sensors/Analog- temperature-sensor/ Detailed-product-flyer.html
10. J. Granstrom, J. Feenstra, H. A. Sodano, and K. Farinholt, "Energy harvesting from a backpack instrumented with piezoelectric shoulder straps," Smart Mater. Struct., vol. 16, no. 5, pp. 1810-1820, 2007. (Pubitemid 351291544)
11. E. S. Leland, E. M. Lai, and P. K. Wright, "A self-powered wireless sensor for indoor environmental monitoring," in Wireless Networking Symp., Austin, TX, 2004 [CD-RO M].
12. Y. B. Jeon, R. Sood, J. Jeong, and S. G. Kim, "MEMS power generator with transverse mode thin film PZT," Sens. Actuators A, vol. 122, no. 1, pp. 16-22, 2005. (Pubitemid 41037282)
13. G. Park, T. Rosing, M. D. Todd, C. R. Farrar, and W. Hodgkiss, "Energy harvesting for structural health monitoring sensor networks," J. Infrastruct. Syst., vol. 14, no. 1, pp. 64-79, 2008. (Pubitemid 351279604)
14. H. Bai, M. Atiquzzaman, and D. Lilja, "Wireless sensor network for aircraft health monitoring," in Proc. 1st Int. Conf. Broadband Networks (BroadNets' 04), 2004, pp. 748-750. (Pubitemid 40731198)
15. S. Roundy, P. K. Wright, and J. Rabaey, "A study of low level vibrations as a power source for wireless sensor nodes," Comput. Commun., vol. 26, no. 11, pp. 1131-1144, 2003.
16. F. Goldschmidtboeing and P. Woias, "Characterization of different beam shapes for piezoelectric energy harvesting," J. Micromech. Microeng., vol. 18, no. 10, art. no. 104013, 2008.
17. S. Roundy, E. S. Leland, J. Baker, E. Carleton, E. Reilly, E. Lai, B. Otis, J. M. Rabaey, P. K. Wright, and V. Sundararajan, "Improving power output for vibration-based energy scavengers," IEEE Pervasive Comput., vol. 4, pp. 28-36, Jan-Mar. 2005. (Pubitemid 40495603)
18. B. Zheng, C. J. Chang, and H. C. Gea, "Topology optimization of energy harvesting devices using piezoelectric materials," Struct. Multidiscip. Optim., vol. 38, no. 1, pp. 17-23, 2009.
19. E. C. N. Silva, "Comment on "Topology optimization of energy harvesting devices using piezoelectric materials," Struct. Multidiscip. Optim., vol. 39, no. 3, pp. 337-338, 2009.
20. A. Erturk and D. J. Inman, "Issues in mathematical modeling of piezoelectric energy harvesters," Smart Mater. Struct., vol. 17, no. 6, art. no. 065016, 2008.
21. H. Kim, Y. Tadesse, and S. Priya, "Piezoelectric energy harvesting," in Energy Harvesting Technologies, S. Priya and D. J. Inman, Eds. New York, NY: Springer, 2009, pp. 9-16.
22. D. Shen, S. Y. Choe, and D. J. Kim, "Analysis of piezoelectric materials for energy harvesting devices under high-g vibrations," Jpn. J. Appl. Phys., vol. 46, no. 10A, pp. 6755-6760, 2007. (Pubitemid 47575207)
23. S. Lee, B. D. Youn, and B. C. Jung, "Robust segment-type energy harvester and its application to a wireless sensor," Smart Mater. Struct., vol. 18, no. 9, art. no. 095021 2009.
24. Y. Tadesse, S. Zhang, and S. Priya, "Multimodal energy harvesting system: Piezoelectric and electromagnetic," J. Intell. Mater. Syst. Struct., vol. 20, no. 5, p. 625-632, 2009.
25. A. Kasyap, J. Lim, D. Johnson, S. Horowitz, T. Nishida, K. Ngo, M. Sheplak, and L. Cattafesta, "Energy reclamation from a vibrating piezoceramic composite beam," in 9th Int. Congr. Sound and Vibration (ICSV9), 2002.
26. G. K. Ottman, H. F. Hofmann, A. C. Bhatt, and G. A. Lesieutre, "Adaptive piezoelectric energy harvesting circuit for wireless remote power supply," IEEE Trans. Power Electron., vol. 17, no. 5, pp. 669-676, 2002. (Pubitemid 35241889)
27. S. Meninger, J. O. Mur-Miranda, R. Amirtharajah, A. Chandrakasan, J. H. Lang, and C. Mit, "Vibration-to-electric energy conversion," IEEE Trans. Very Large Scale Integr. (VLSI) Syst., vol. 9, no. 1, pp. 64-76, 2001. (Pubitemid 32922812)
28. M. J. Guan and W. H. Liao, "On the efficiencies of piezoelectric energy harvesting circuits towards storage device voltages," Smart Mater. Struct., vol. 16, no. 2, pp. 498-505, 2007. (Pubitemid 46402813)
29. C. J. Rupp, A. Evgrafov, K. Maute, and M. L. Dunn, "Design of piezoelectric energy harvesting systems: A topology optimization approach based on multilayer plates and shells," J. Intell. Mater. Syst. Struct., vol. 20, no. 16, p. 1923-1939, 2009.
30. S. R. Anton and H. A. Sodano, "A review of power harvesting using piezoelectric materials (2003-2006)," Smart Mater. Struct., vol. 16, no. 3, p. R1-R21, 2007. (Pubitemid 46804867)
31. H. A. Sodano, D. J. Inman, and G. Park, "A review of power harvesting from vibration using piezoelectric materials," Shock Vib. Dig., vol. 36, no. 3, pp. 197-205, 2004.
32. S. Lee, B. D. Youn, and M. Giraud, "Designing energy harvesting skin structure utilizing outdoor unit vibration," in ASME Int. Design Engineering Technical Conf. & Computers and Information in Engineering Conf., Montreal, Canada, 2010, art. no. DETC2010-29180.
33. H. Allik and T. J. R. Hughes, "Finite element method for piezoelectric vibration," Int. J. Numer. Methods Eng., vol. 2, no. 2, pp. 151-157, 1970.
34. A. Badel, D. Guyomar, E. Lefeuvre, and C. Richard, "Efficiency enhancement of a piezoelectric energy harvesting device in pulsed operation by synchronous charge inversion," J. Intell. Mater. Syst. Struct., vol. 16, no. 10, pp. 889-901, 2005. (Pubitemid 41498489)
35. A. Erturk, P. A. Tarazaga, J. R. Farmer, and D. J. Inman, "Effect of strain nodes and electrode configuration on piezoelectric energy harvesting from cantilevered beams," J. Vib. Acoust., vol. 131, no. 1, art. no. 011010, 2009.
36. S. N. Chen, G. J. Wang, and M. C. Chien, "Analytical modeling of piezoelectric vibration-induced micro power generator," Mechatronics, vol. 16, no. 7, pp. 379-387, 2006.
37. F. Lu, H. P. Lee, and S. P. Lim, "Modeling and analysis of micro piezoelectric power generators for micro-electromechanical-systems applications," Smart Mater. Struct., vol. 13, no. 1, pp. 57-63, 2004.
38. J. H. Lin, X. M. Wu, T. L. Ren, and L. T. Liu, "Modeling and simulation of piezoelectric MEMS energy harvesting device," Integr. Ferroelectr., vol. 95, no. 1, pp. 128-141, 2007.
39. A. Erturk and D. J. Inman, "An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations," Smart Mater. Struct., vol. 18, no. 2, art. no. 025009, 2009.
40. (2010, Jan. 22) 2024 T3 Alclad Aluminum Sheet and Coil. Airparts, Inc., Kansas City, KS. [Online]. Available: http:// www.airpartsinc.com/shopexd.asp? id=208
41. (2008, Feb. 22) Catalog #7C, Piezo Systems, Inc., Woburn, MA.[Online]. Available: http://piezo.com/catalog7C.pdf.
42. (2009, Dec 12) Alclad Aluminum 7075-O, MatWeb Material Property Data. [Online]. Available: http://www.matweb.com/search/ DataSheet.aspx?MatGUID= 7d7d6e4e0bf74145800cae70b5e96314&ckck=1
43. D. Haberman, (2008, Apr. 24) Sine-sweep test simulation. [Online]. Available: http://ansys.net/tips/week6-compar-lm-dd3.pdf
44. T. Leibfried and A. G. Siemens, "Online monitors keep transformers in service," IEEE Comput. Appl. Power, vol. 11, no. 3, pp. 36-42, 1998.
45. D. Allan, M. Blundell, K. Boyd, and D. Hinde, "New techniques for monitoring the insulation quality of in-service HV apparatus," IEEE Trans. Electr. Insul., vol. 27, no. 3, pp. 578-585, 2002.
46. H. L. Rivera, J. A. Garcia-Souto, and J. Sanz, "Measurements of mechanical vibrations at magnetic cores of power transformers with fiber-optic interferometric intrinsic sensor," IEEE J. Sel. Topics Quantum Electron., vol. 6, no. 5, pp. 788-797, 2000. (Pubitemid 32134547)
47. W. R. Lee and J. S. Lee, "Study on vibration velocity rating for main transformer in nuclear power plant," in Korean Soc. Noise and Vibration Engineering (KSNE) Annu. Spring & Fall Conf., 2005, pp. 587-594. (in Korean)
48. H. Peter, H. Andreas, K. Manfred, B. Florian, D. Markus, I. Hans, and H. Alexander, "3D-FEM simulation for investigation of load noise of power transformers verified by measurements," in 2008 Int. Conf. Electrical Machines, Vilamoura, Portugal, pp. 1-4.
49. P. Wang, B. D. Youn, and C. Hu, "A generic sensor network design framework based on a detectability measure," in ASME Int. Design Engineering Technical Conf. & Computers and Information in Engineering Conf., Montreal, Canada, 2010, art. no. DETC2010-29181.