Producing Pharmaceutical particles via Electrospraying with an emphasis on nano and nano structured particles - A review

KONA Powder and Particle Journal

Volumn 28, Issue , 2010, Pages 91-115

  Yurteri, C U ^a   Hartman, R P A ^a   Marijnissen, J C M ^a  

^a DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

Drug; EHDA; Electrospray; Inhalation; Micro droplets; Nanoparticles

Indexed keywords

ATOMIZATION; BIOCOMPATIBILITY; DROPS; ELECTROHYDRODYNAMICS; FIGHTER AIRCRAFT; JETS; LIQUIDS; NANOPARTICLES; NOZZLES; NUCLEIC ACIDS; SCALING LAWS;

DRUG; EHDA; ELECTROSPRAYS; INHALATION; MICRO DROPLETS;

SPRAY NOZZLES;

EID: 79952937096     PISSN: 02884534     EISSN: 21875537     Source Type: Journal    
DOI: 10.14356/kona.2010010     Document Type: Review

References (138)

1. Albert H. L. Chow, Henry H. Y. Tong, Pratibhash Chattopadhyay,and Boris Y. Shekunov. (2007): Particle Engineering for Pulmonary Drug Delivery, Pharmaceutical Research, Vol. 24, No. 3, March 2007.
2. Almeria B., Deng W., Fahmy T.A. and Gomez A. (2010): Controlling the morphology of electrospray generated PLGA microparticles for drug delivery, Journal of Colloid and Interface Science, 343, pp.125-133.
3. Arnanthigo, Y., Yurteri, C., Marijnissen, J. and Schmidt-Ott, A. (2010):'Improved design of multi-electrospray unit with circular symmetry', in: Meesters, G., Pfeffer, T.V., Hauser-Vollrath, C. (Eds.), Proceedings of the Sixth World Congress on Particle Technology, paper 616.
4. Bailey, A.G. (1988): ''Electrostatic spraying of liquids'', Research Studies Press, Taunton.
5. Barreras, F., H. Amaveda, et al. (2002): Transient highfrequency ultrasonic water atomization, Experiments in Fluids, 33(3): 405-413.
6. Bhaskar, S., Pollock, K.M., Yoshida, M. and Lahann, J. (2010): Towards designer microparticles: simultaneous control of anisotropv, shape and size, Small, 6 (3), pp. 404-411.
7. Biskos G., Vons V., Yurteri C.U. and Schmidt-Ott A. (2008): Generation and Sizing of Particles for Aerosol-Based Nanotechnology, KONA Powder and Particle Journal, No 26. pp.13-35.
8. Camelot, D.M.A. (1999): ''The bipolar coagulation process for powder production'', PhD thesis, Delft University of Technology.
9. Camelot D., Marijnissen J.C.M. and Scarlett B. (1999): Bipolar coagulation process for the production of powders, Industrial and Engineering Chemistry Research, 38 (3), pp. 631-638.
10. Champion, J.A., Katare, Y.K. and Mitragotri, S. (2007): Particle shape: A new design parameter for micro- and nanoscale drug delivery carriers, Journal of Controlled Release, 121 (1-2), pp.3-9.
11. Chang, M.-W., Stride, E. and Edirisinghe, M. (2009): A novel process for drug encapsulation using a liquid to vapour phase change material, Soft Matter, 5 (24), pp.5029-5036.
12. Chang, M.-W., Stride, E. and Edirisinghe, M. (2010): A new method for the preparation of monoporous hollow microspheres, Langmuir, 26 (7), pp.5115-5121.
13. Chen D. and Pui D.Y.H. (2010): Electrospray and its medical applications in ''Nanoparticles in medicine and environment Inhalation and health effects'', Marijnissen, J.C.; Gradon, Leon (Eds.), Springer.
14. Chen, D. and Pui, D.Y.H. (1997): Experimental investigation of scaling laws for electrospraying: dielectric constant effect, Aerosol Sci. Tech., 27(3), pp.367-380.
15. Chen, D., Pui, D.Y.H., and Kaufman, S. L. (1995): Electrospraying of conducting liquids for monodisperse aerosol generation in the 4 nm to 1.8 μm diameter range, J. Aerosol Sci., 26(6), pp.963-977.
16. Chen, D.-R., Wendt, C.H. and Pui, D.Y.H. (2000): A novel approach for introducing bio-materials into cells, Journal of Nanoparticle Research, 2 (2), pp.133-139.
17. Chen, X., Jia, L., Yin, X. and Cheng, J. (2005): Spraying modes in coaxial jet electrospray with outer driving liquid, Physics of Fluids, 17, pp.032101:1-7.
18. Ciach T., (2007), Application of Electro Hydro Dynamic Atomization in Drug Delivery, A Review, Journal of Drug Delivery Science and Technology, Volume 17, No: 6, pp.367-375.
19. Ciach, T., Geerse, K. B. and Marijnissen, J. C. M. (Kanuth, P. and Schoonman, J. eds.) (2002): EHDA in Particle Production in ''Nanostructured Materials'', Kluwer Academic Publisher, Boston.
20. Cloupeau, M. and Prunet-Foch, B. (1994): Electrohydrodynamic Spraying Functioning Modes: A critical review, J. Aerosol Sci., 25, pp.1021-1036.
21. Cof fee, R.A. (2005): ''Dispensing Device'', US patent 6880554.
22. Cole, R.B. (1997): ''Electrospmy Ionisation Mass Spectrometry'', Wiley, New York.
23. Coppens, P.F. (2007): ''Coating of tribocharged model particles with nanoparticles using EHDA'', MS Thesis, Delft University of Technology, Faculty of Applied Sciences, Nanostructured Materials Research Group, Process and Product Engineering Research Group.
24. Dabkowski, M.F. (2006): ''Coating of Par ticles with Nanoparticles by Means of Electrostatic Forces'', MS Thesis, Delft University of Technology, Faculty of Applied Sciences, Nanostructured Materials Research Group, Process and Product Engineering Research Group.
25. Dabkowski, M.F., van Ommen, J.R., Yurteri, C.U., Hochhaus, G. and, Marijnissen, J.C.M. (2007): 'The coating of particles with nanoparticles by means of electrostatic forces', in: Schreglmann, C., Peukert, W.(Eds.), Partec 2007 - CD proceedings, Nuernberg, Germany, paper S37-S42.
26. de la Mora, J. F. and Loscertales, I. G. (1994): The Current Emitted by Highly Conducting Taylor Cones, J. Fluid Mechanics, 260, pp.155-184.
27. De La Mora, J. F., Navascues, J., Fernandez, F. and Rosell- Llompart, J. (1990): Generation of submicron monodisperse aerosols in electrosprays, J. Aerosol Sci., 21 (SUPPL. 1), pp.S673-S676.
28. de la Mora, J.F. (2007): The fluid dynamics of Taylor Cones, Annual Review of Fluid Mechanics, 39, pp.217-243.
29. Decuzzi P., Godin B., Tanaka T., Lee S.-Y., Chiappini C., Liu X. and Ferrari M. (2010): Size and shape effects in the biodistribution of intravascularly injected particles, Journal of Controlled Release, 141 (3), pp.320-327.
30. Deng, W. and Gomez, A. (2007): Influence of space charge on the scale-up of multiplexed electrosprays, J. Aerosol Sci., 38 (10), pp.1062-1078.
31. Deng, W., Waits, C.M., Morgan, B. and Gomez, A. (2009): Compact multiplexing of monodisperse electrosprays, J. Aerosol Sci., 40 (10), pp.907-918.
32. Dole M., Cox H.L. and Gieniec, J. (1973): Electrospray Mass Spectroscopy Chapter 7, pp.73-84, in Polymer Molecular Weight Methods, Advances in Chemistry, Vol. 125.
33. Dole, M., Mack, L.L., Hines, R.L., Chemistry, D.O., Mobley, R.C., Ferguson, L.D. and Alice, M.B. (1968): Molecular beams of macroions, The Journal of Chemical Physics, 49 (5), pp.2240-2249.
34. Dulcks, T. and Juraschek, R. (1999): Electrospray as an ionization method for mass spectrometry, J. Aerosol Sci., 30, pp.927-943.
35. Ellis, N., Yurteri, C.U. and van Ommen, J.R. (2010): Development of a continuous nanoparticle coating with electrospraying, in: Kim, S.D, Kan, Y., Lee, J.K., Seo, Y.C. (Eds.), Fluidization XIII, Engineering Conferences International, New York.
36. Enayati, M., Ahmad, Z., Stride, E. and Edirisinghe, M. (2010): One-step electrohydrodynamic production of drug-loaded micro- and nanoparticles, Journal of the Royal Society Interface, 7 (45), pp.667-675.
37. Felder, C. B., M. J. Blanco-Prieto, et al. (2003): Ultrasonic atomization and subsequent polymer desolvation for peptide and protein microencapsulation into biode gradable polyesters, Journal of Microencapsulation 20(5), pp.553-567.
38. Forde, G., J. Friend, et al. (2006): Straightforward biodegradable nanoparticle generation through megahertzorder ultrasonic atomization, Applied Physics Letters 89(6), art.no.064105.
39. Freitas, S., H. P. Merkle, et al. (2004): Ultrasonic atomization into reduced pressure atmosphere - Envisaging aseptic spray-drying for microencapsulation, Journal of Controlled Release, 95(2), pp.185-195.
40. Friend, J. R., L. Y. Yeo, et al. (2008): Evaporative self-assembly assisted synthesis of polymeric nanoparticles by surface acoustic wave atomization, Nanotechnology 19(14), art.no.145301.
41. Gañán-Calvo, A. (2003): ''Device and Method for Creating Aerosols for Drug Delivery'', US patent 6595202.
42. Gañán-Calvo, A. M., Davila, J. and Barrero, A. (1997): Current and Droplet Size in the Electrospraying of Liquids. Scaling Laws. J. Aerosol Sci., 28, pp.249-275.
43. Ganán-Calvo, A.M. (2004): On the general scaling theory for electrospraying, Journal of Fluid Mechanics, 507, pp.203-212.
44. Geerse, K. B. (2003): ''Applications of Electrospray: From People to Plants'', PhD thesis, Delft University of Technology.
45. Geerse, K.B. and Marijnissen J.C.M. (2003): Electrospray as Means to Produce Monodisperse Drug Particles, pp.75-90, in Gradon, L. and Marijnissen, J. (Editors), ''Optimization of Aeorosol Drug Delivery'', Kluwer Academic Publishers.
46. Geller, D.E. (2008): The science of Aerosol Delivery in Cystis Fibrosis, Pediatric Pulmonary 43, S5-S17.
47. Gilbert W. (1600): ''De Magnete''.
48. Gomez, A. and Tang, K. (1994): Charge and fission of droplets in electrostatic sprays. Phys. Fluids., A 6, pp.404-414.
49. Gomez A., Bingham D., De Juan L. and Tang K. (1998): Production of protein nanoparticles by electrospray drying, J. Aerosol Sci., 29 (5-6), pp.561-574.
50. Gomez, A., de la Mora, J.F. and Tang, K. (1999): ''Electrospray Employing Corona-Assisted Cone-Jet Mode'', US patent 5873523.
51. Gonzalez, D., Nasibulin, A.G., Jiang, H., Queipo, P. andKauppinen, E.I. (2007): Electrospraying of ferritin solutions for the production of monodisperse iron oxide nanoparticles, Chemical Engineering Communications, 194 (7), pp.901-912.
52. Grace, J. M. and Marijnissen, J. C. M. (1994): A Review of Liquid Atomization by Electrical Means. J. Aerosol Sci., 25:6, pp.1005-1019.
53. Gradon, L. and Marijnissen, J. (Editors) (2003): ''Optimization of Aeorosol Drug Delivery'', Kluwer Academic Publishers.
54. Hartman, R. P. A. (1998): ''Electrohydrodynamic Atomization in the Cone Jet Mode. From Physical Modeling to Powder Production'', PhD thesis, Delft University of Technology.
55. Hartman, R. P. A., Brunner, D. J., Camelot, D. M. A., Marijnissen, J. C. M. and Scarlett, B. (1999): Electrohydrodynamic Atomization in The Cone-Jet Mode Physical Modeling of The Liquid Cone and Jet. J. Aerosol Sci., 30:7, pp.823-849.
56. Hartman, R. P. A., Brunner, D. J., Camelot, D. M. A., Marijnissen, J. C. M. and Scarlett, B. (2000): Jet Break-Up in Electrohydrodynamic Atomization in the Cone-Jet Mode. J. Aerosol Sci., 31:(1), pp.65-95.
57. Hayati, I., Bailey, A. and Tadros, Th.F. (1987b): Investigations into the mechanism of electrohydrodynamic spraying of liquids. II. Mechanism of stable jet formation and electrical forces acting on a liquid cone Journal of Colloid And Interface Science, 117 (1), pp.222-230.
58. Hayati, I., Bailey, A.I. and Tadros, Th.F. (1987a): Investigations into the mechanisms of electrohydrodynamic praying of liquids. I. Effect of electric field and the environment on pendant drops and factors affecting the formation of stable jets and atomization Journal of Colloid And Interface Science, 117 (1), pp.205-221.
59. Heijerman H, Westerman E., Conway S., Touw D. and Doring G. (2009): Inhaled medication and inhalation devices for lung disease in patients with cystic fibrosis: A European Concensus, Journal of Cystic Fibrosis, 8, pp.295-315.
60. Hickey, A. J., (Editor), (1996): ''Inhalation Aerosols: Physical and Biological Basis for Therapy'', Informa Healthcare.
61. Hinds, W. C. (1999): ''Aerosol Technology 2nd ed.'', John Wiley & Sons, Inc., New York.
62. Hogan Jr. C.J., Yun K.M., Chen D.-R., Lenggoro I.W.,Biswas P. and Okuyama K. (2007): Controlled size polymer particle production via electrohydrodynamic atomization, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 311 (1-3), pp.67-76.
63. Hong, Y., Li, Y., Yin, Y., Li, D. and Zou, G. (2008): Electrohydrodynamic atomization of quasi-monodisperse drugloaded spherical/wrinkled microparticles, Journal of Aerosol Sci., 39 (6), pp.525-536.
64. Hull, P., Hutchison, J., Salata, O. and Dobson, P. (1997): Synthesis of Nanometerscale Silver Crystallites via A Room-Temperature Electrostatic Spraying Process. Advanced Materials 9:5, pp.413-417.
65. Ijsebaert, J.C., Geerse, K.B., Marijnissen, J.C.M., Lammers, J.-W.J. and Zanen, P. (2001): Electro-hydrodynamic atomization of drug solutions for inhalation purposes, Journal of Applied Physiology,91(6), pp.2735-2741.
66. Jaworek A. (2008): Electrostatic micro- and nanoencapsulation and electroemulsification: A brief review Journal of Microencapsulation, 25 (7), pp.443-468.
67. Jaworek, A. (2007): Micro- and nanoparticle production by electrospraying, Powder Technology, 176 (1), pp.18-35.
68. Jaworek, A. and Krupa, A. (1999): Classification of the modes of EHD spraying, J. Aerosol Sci., 30 (7), pp.873-893.
69. Jaworek, A. and Sobczyk, A.T. (2008): Electrospraying route to nanotechnology: An overview Journal of Electro statics, 66 (3-4), pp.197-219.
70. Juraschek, R. and Röllgen, F.W. (1998): Pulsation phenomena during electrospray ionization, International Journal of Mass Spectrometry, 177 (1), pp.1-15.
71. Kebarle, P and Tang L. (1993): From ions in solution to ions in the gas-phase: The mechanism of electrospray mass-spectrometry. Anal. Chem., 65, pp.972-986.
72. Kim, K., Kim, W., Hwa Yun, S., Hyun Lee, J., Kim, S. andLee, B.U. (2008): Use of an electrospray for the generation of bacterial bioaerosols, J. Aerosol Sci., 39 (4), pp.365-372.
73. Kim, K., Lee, B.U., Hwang, G.B., Lee, J.H. and Kim, S. (2010): Drop-on-demand patterning of bacterial cells using pulsed jet electrospraying, Analytical Chemistry, 82 (5), pp.2109-2112.
74. Kim, W. and Kim, S.S. (2010): Multishell encapsulation using a triple coaxial electrospray system, Analytical Chemistry, 82 (11), pp.4644-4647.
75. Kleinstreuer, C., Zhang, Z. and Donohue, J.F. (2008): Targeted drug-aerosol delivery in the human respiratory system, Annual Review of Biomedical Engineering, 10, pp.195-220.
76. Kozhenkov, V.I. and Fuks, N.A. (1976): Electrohydrodynamic atomization of liquids, Russian Chem. Rev. 45, pp.1179-1184.
77. Lallave M., Bedia J., Ruiz-Rosas R., Rodriguez-Mirasol J.,Cordero T., Otero J.C., Marquez M. and Loscertales I.G. (2007): Filled and hollow carbon nanofibers by coaxial electrospinning of Alcell lignin without binder polymers, Advanced Materials, 19 (23), pp.4292-4296.
78. Lastow, O. (2007): ''Numerical and Experimental Study of Electrohydrodynamic Atomisation of Aqueous Liquids'', PhD thesis, Brunel University.
79. Leeuwenburgh, S.C.G, (2006b): ''Electrosprayed calcium phosphate coatings for biomedical purposes'', PhD Thesis Radboud University Nijmegen.
80. Leeuwenburgh, S.C.G., Heine, M.C., Wolke, J.G.C., Pratsinis, S.E., Schoonman, J. and Jansen, J.A. (2006a): Morphology of calcium phosphate coatings for biomedical applications deposited using Electrostatic Spray Deposition Thin Solid Films, 503 (1-2), pp.69-78.
81. Lefebvre, A.H. (1989): ''Atomization and Sprays'', Hemisphere Publishing Company.
82. Lenggoro, I., Okuyama, K., de la Mora, J. and Tohge, N. (2000): Preparation of ZnS Nanoparticles by Electrospray Pyrolysis, J. Aerosol Sci., 31:(1), pp.121-136.
83. Loscertales, I.G., Barrero, A., Guerrero, I., Cortijo, R., Marquez, M. and Gañán-Calvo, A.M. (2002): Micro/nano encapsulation via electrified coaxial liquid jets, Science, 295 (5560), pp.1695-1698.
84. Mao S., Lu G., Yu K., and Chen J. (2010): Protein Viability on Au Nanoparticles during an Electrospray and Electrostatic- Force-Directed Assembly Process, Journal of Nanomaterials, vol. 2010, Article ID 196393, 6 pages,. doi:10.1155/2010/196393.
85. Marijnissen J.C.M., Yurteri C.U., van Erven J. and Ciach T. (2010): Medicine Nanoparticle production by EHDA in ''Nanoparticles in medicine and environment Inhalation and health effects'', Marijnissen, J.C.; Gradon, Leon (Eds.), Springer.
86. Meesters, G., Vercoulen, P. H. W., Marijnissen, J. C. M. and Scarlett, B. (1992): Generation of Micron-Sized Droplets from the Taylor Cone, J. Aerosol Sci., 23:(1), pp.37-49.
87. Meesters, G.M.H. (1992): ''Mechanisms of droplet formation'', PhD thesis, Delft University of Technology.
88. Meng, C.K., Mann, M. and Fenn, J.B. (1988): Of protons or proteins - ''A beam's a beam for a' that.'' (O.S. Burns), Zeitschrift für Physik D Atoms, Molecules and Clusters, 10 (2-3), pp.361-368.
89. Michelson, D. (1990): ''Electrostatic atomization'', Bristol, England; New York, NY, USA,
90. A. Hilger. Mitragotri S. (2009a): In drug delivery, shape does matter, Pharmaceutical Research, 26 (1), pp.232-234.
91. Mitragotri S. and Lahann J. (2009b): Physical approaches to biomaterial design, Nature Materials, 8 (1), pp.15-23.
92. Moerman, R., Frank, J., Marijnissen, J.C.M., Schalkhammer, T.G.M. and Van Dedem, G.W.K. (2001): Miniaturized electrospraying as a technique for the production of microarrays of reproducible micrometer-sized protein spots, Analytical Chemistry,73(10), pp.2183-2189.
93. Muro S., Garnacho C., Champion J.A., Leferovich J., Gajewski C., Schuchman E.H., Mitragotri S. and Muzykantov V.R. (2008): Control of endothelial targeting and intracellular delivery of therapeutic enzymes by modulating the size and shape of ICAM-1-targeted carriers, Molecular Therapy, 16 (8), pp.1450-1458.
94. Nakaso, K., Han, B., Ahn, K.H., Choi, M. and Okuyama, K. (2003): Synthesis of non-agglomerated nanoparticles by an electrospray assisted chemical vapor deposition (ES-CVD) method, J. Aerosol Sci., 34 (7), pp.869-881.
95. Noakes, T. J., Pavey, I. D. Bray, D. and Rowe, R.C. (1989): ''Apparatus for producing a spray of droplets of a liquid'', U.S. patent 4829996.
96. Noakes, T.J., Prendergast, M.J. and Green, M.L., (2000): ''Electrostatic Spraying'', US patent 6079634.
97. Park, C.H., Kim, K.-H., Lee, J.-C. and Lee, J. (2008): Insitu nanofabrication via electrohydrodynamic jetting of countercharged nozzles, Polymer Bulletin, 61 (4), pp.521-528.
98. Rosell-Llompart, J., Fernández de la and Mora, J. (1994): Generation of monodisperse droplets 0.3 to 4 μm in diameter from electrified cone-jets of highly conducting and viscous liquids, J. Aerosol Sci., 25 (6), pp.1093-1119.
99. Rulison, A. J. and Flagan, R. C. (1994): Synthesis of Yttria Powders by Electrospray Pyrolysis. J. American Ceramic Society 77, pp.3244-3250.
100. Schacter, D.M., Shissias R.S., Yurteri C.U. and Escallon E.C. (2007): ''Improved process for coating a medical device'', US patent application 2007/0077435.
101. Shiryaeva, S.O. and Grigor'ev, A.I. (1995): The semiphenomenological classification of the modes of electrostatic dispersion of liquids, Journal of Electrostatics, 34 (1), pp.51-59.
102. Shoyele, S.A. and Cawthorne, S. (2006): Particle engineering techniques for inhaled biopharmaceuticals, Advanced Drug Delivery Reviews, 58 (9-10), pp.1009-1029.
103. Shoyele, S.A. and Slowey, A. (2006): Prospects of formulating proteins/peptides as aerosols for pulmonary drug delivery, International Journal of Pharmaceutics, 314 (1), pp.1-8.
104. Siekmeier, R. and Scheuch, G. (2008): Inhaled insulin - does it become reality? Journal of Physiology and Pharmacology, 59 (SUPPL. 6), pp.81-113.
105. Simone E.A., Dziubla T.D. and Muzykantov V.R. (2008): Polymeric carriers: Role of geometry in drug delivery, Expert Opinion on Drug Delivery, 5 (12), pp.1283-1300.
106. Smith, D. P.H. (1986): Electrohydrodynamic Atomization of Liquids, IEEE Transactions on Industry Applications, IA-22 (3), pp.527-535.
107. Smith, J. N., Flagan, R. C. and Beauchamp, J. L. (2002): Droplet Evaporation and Discharge Dynamics in Electrospray Ionization, J. Physical Chemistry, A 106:42, pp.9957-9967.
108. Smith, R.D., Bruce, J.A., Wu, Q., and Lei, P. (1997): New mass spectrometric methods for the study of noncovalent associations of biopolymers, Chem. Soc. Rev., 26, pp.191-202.
109. Snarski, S.R. and Dunn, P.F. (1991): Experiments characterizing the interaction between two sprays of electrically charged liquid droplets, Experiments in Fluids, 11 (4), pp.268-278.
110. Stachewicz, U., Dijksman, J.F., Burdinski, D., Yurteri, C.U. and Marijnissen, J.C.M. (2009b): Relaxation times in single event electrospraying controlled by nozzle front surface modification, Langmuir,25(4), pp.2540-2549.
111. Stachewicz, U., Dijksman, J.F., Yurteri, C.U. and Marijnissen, J.C.M. (2010b): Volume of liquid deposited per single event electrospraying controlled by nozzle front surface modification, ''Microfluidics and Nanofluidics'', q(4-5), pp.635-644.
112. Stachewicz, U., Yurteri, C.U., Frits Dijksman, J. and Marijnissen, J.C.M. (2010a): Single event electrospraying of water, J. Aerosol Sci., Article in Press.
113. Stachewicz, U., Yurteri, C.U., Marijnissen, J.C.M. and Dijksman, J.F. (2009a): Stability regime of pulse frequency for single event electrospraying, Applied Physics Letters,95(22),art. no.224105.
114. Suh, J., Han, B., Okuyama, K. and Choi, M., (2005),:Highly charging of nanoparticles through electrospray of nanoparticle suspension, Journal of Colloid and Interface Science, 287 (1), pp.135-140.
115. Sung, J.C., Pulliam, B.L. and Edwards, D.A. (2007): Nanoparticles for drug delivery to the lungs, Trends in Biotechnology, 25 (12), pp.563-570.
116. Tang, K. and Gomez, A. (1994): Generation by electrospray of monodisperse water droplets for targeted drug delivery by inhalation, J. Aerosol Sci., 25, pp.1237-1249.
117. Taylor, G. I. (1964): Disintegration of Water Drops in An Electric Field, Proc. R. Soc. A280, pp.383-397.
118. Van Erven Jan, Moerman Rob, and Marijnissen Jan C. M. (2005): Platinum nanoparticle production by EHDA, Aerosol Science and Technology, vol. 39, no 10, pp.929-934.
119. van Ommen J.R., Beetstra R., Nijenhuis J., Yurteri C.U. and Marijnissen J.C.M. (2008): Coating of tribocharged host particles with nanoparticles using electrospraying, Particulate Processes in the Pharmaceutical Industry II, San Juan, Puerto Rico, February 3-7,
120. van Zomeren A.A., Kelder E.M., Marijnissen J.C.M. and Schoonman J. (1994): The production of thin films of LiMn2O4 by electrospraying, J. Aerosol Sci., 25 (6), pp.1229-1235.
121. Vercoulen P.H.W., Camelot D.M.A., Marijnissen J.C.M., Pratsinis S, and Scarlett B. (1993):'Sn02 Production by an Electrostatic Spray Pyrolysis Process. In Proc. Intern. Workshop on the Synthesis and Measurement of Ultrajine Particles, Editor Marijnissen J.C.M. and Pratsisnis S. Delft University Press, Delft.
122. Vercoulen, P.H.W. (1995): ''Electrostatic processing of particles. A tool in particle technology'', PhD thesis, Delft University of Technology.
123. Vonnegut, B. and Neubauer, R.L. (1952): Production of monodisperse liquid particles by electrical atomization, Journal of Colloid Science, 7 (6), pp.616-622.
124. Weiler, C., Egen, M., Trunk, M. and Langguth, P. (2010): Force control and powder dispersibility of spray dried particles for inhalation, Journal of Pharmaceutical Sciences, 99 (1), pp.303-316.
125. Wilhelm, O. (2004): ''Electrohydrodynamic spraying - Transport, mass and heat transfer of charged droplets and their application to the deposition of thin functional films'', PhD thesis, ETH Zurich.
126. Wu, Y., Chalmers, J.J. and Wyslouzil, B.E. (2009): The use of electrohydrodynamic spraying to disperse hydrophobic compounds in aqueous media', Aerosol Science and Technology, 43 (9), pp.902-910.
127. Wu, Y., Fei, Z., Lee, L.J. and Wyslouzil, B.E. (2010): Coaxial electrohydrodynamic spraying of plasmid DNA/polyethylenimine (PEI) polyplexes for enhanced nonviral gene delivery, Biotechnology and Bioengineering, 105 (4), pp.834-841.
128. Xie J., Lim L.K., Phua Y., Hua J. and Wang C.-H. (2006): Electrohydrodynamic atomization for biodegradable polymeric particle production, Journal of Colloid and Interface Science, 302 (1), pp.103-112.
129. Xie J. and Wang C. (2007): Electrospray in the dripping mode for cell microencapsulation, Journal of Colloid and Interface Science, 312, pp.247-255.
130. Xie, J., Tan, J.C. and Wang, C.-H. (2008): Biodegradable films developed by electrospray deposition for sustained drug delivery, Journal of Pharmaceutical Sciences, 97 (8), pp.3109-3122.
131. Yamashita, M. and Fenn, J.B. (1984a): Electrospray ion source. Another variation on the free-jet theme, Journal of Physical Chemistry, 88(20), pp.4451-4459.
132. Yamashita, M. and Fenn, J.B. (1984b): Negative ion production with the electrospray ion source, Journal of Physical Chemistry, 88(20), pp.4671-4675.
133. Yule, A. J. and Al-Suleimani Y. (1997): On droplet formation from capillary waves on a vibrating surface, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 456, pp.1069-1085.
134. Zanen, P., Go, L.T. and Lammers, J.-W.J. (1998): The efficacy of a low-dose, monodisperse parasympathicolytic aerosol compared with a standard aerosol from a metered-dose inhaler, European Journal of Clinical Pharmacology, 54(1), pp.27-30.
135. Zanen, P. and Lammers, J.-W.J. (1999): Reducing adverse effects of inhaled fenoterol through optimization of the aerosol formulation, Journal of Aerosol Medicine: Deposition, Clearance, and Effects in the Lung,12(4), pp.241-247
136. Zeleny J. (1914): The electrical discharge from liquid points and an hydrostatic method for measuring the electric intensity at their surface, Phys. Rev. 3, pp.69-91.
137. Zeleny J. (1915): On the condition of instability of liquid drops, with applications to the electrical discharge from liquid points, Proc. Cam. Phil. Soc., 18, pp.71-88.
138. Zeleny J. (1917): Instability of electrified liquid surfaces, Phys. Rev., 10, pp.1-6.