Improving the performance of vapor extraction of heavy oil and bitumen using the warm VAPEX process

Society of Petroleum Engineers - Canadian Unconventional Resources and International Petroleum Conference 2010

Volumn 3, Issue , 2010, Pages 2228-2248

  Rezaei, N ^b   Mohammadzadeh, O ^b   Chatzis, I ^a  

^a UNIVERSITY OF WATERLOO   (Canada)

^b NONE

Author keywords

[No Author keywords available]

Indexed keywords

ASPHALTENES; BITUMINOUS MATERIALS; CRUDE OIL; GASOLINE; ISOTHERMS; RESOURCE VALUATION; SOLVENTS; TEMPERATURE; THERMAL OIL RECOVERY; VISCOSITY;

ASPHALTENE PRECIPITATION; BUBBLE POINT TEMPERATURES; ENHANCED OIL RECOVERY; HEAVY OIL AND BITUMENS; OPTIMAL OPERATING CONDITIONS; PRODUCTION PERFORMANCE; RESIDUAL OIL SATURATION; TEMPERATURE VARIATION;

HEAVY OIL PRODUCTION;

EID: 79952912963     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.2118/137824-ms     Document Type: Conference Paper

References (42)

1. Alboudwarej, H., Akbarzadeh, K., Beck, J., Svreck, W.Y. and Yarranton, W.H.: Regular solution model for asphaltene precipitation from bitumens and solvents. AICHE J., 49(1), 2948-2956 (2003).
2. Allen, J.C.: Gaseous solvent heavy oil recovery. Canadian Patent No. 446874, February 28 (1974).
3. Allen, J.C., Redford, A.D.: Combination solvent-noncondensable gas injection method for recovering petroleum from viscous petroleum-containing formations including tar sad deposits. United States Patent No. 4109720, Texaco, New York, August 29, 1978, US application No. 740281, November 9 (1976).
4. Butler, R.M., Mokrys, I.J.: Solvent analogue model of steam-assisted gravity drainage. AOSTRA Journal of Research, 5, 17-32 (1989).
5. Butler, R.M., Mokrys, I.J.: Closed-loop extraction method for the recovery of heavy oils and bitumens underlain by aquifers: the VAPEX process. JCPT, 37(4), 41-50(1998).
6. Butler, R.M., Mokrys, I.J.: A new process (VAPEX) for recovering heavy oils using hot water and hydrocarbon vapor. JCPT, 30(1), 97-106 (1991).
7. Carey, Van P.: Liquid vapor phase change phenomena: an introduction to thermodynamics of vaporization and condensation processes in heat transfer equipment. 2nd Ed., Taylor & Francis, (2007).
8. Chatzis, I.: Pore scale mechanisms of heavy oil recovery using the VAPEX process. Paper 2002-198, presented at the Petroleum Society's Canadian International Petroleum Conference 2002, Calgary, Alberta, Canada, 11-13 June, (2002).
9. Das, S.K.: VAPEX: an efficient process for the recovery of heavy oil and bitumen. SPE J. 50941, 232-237 (1998).
10. Das, S.K., Butler, R.M.: Mechanism of the vapor extraction process for heavy oil and bitumen. J. Pet. Sci. Eng., 21, 43-59 (1998).
11. Deng, X.: Recovery performance and economics of steam/propane hybrid process. SPE/PS-CIM/CHOA, SPE-97760 (2005).
12. Dunn, S.G., Nenniger, E.H., Rajan, V.S.V.: A study of bitumen recovery by gravity drainage using low-temperature soluble-gas injection. Can. J. Chem. Eng., 67, 978-991 (1989).
13. Fergusen, M.A., Mamora, D.D., Goite, J.G.: Steam-propane injection for production enhancement of heavy Morichal oil. SPE-69689 (2001).
14. Firoozabadi, A.: Thermodynamics of hydrocarbon reservoirs. McGraw Hill (1999).
15. Frauenfeld, T., Jossy, C., Wang, X.: Experimental studies of thermals solvent oil recovery process for live heavy oil. Canadian International Petroleum Conference (CIPC), 56th Annual Technical Meeting, Paper 2005-151, Calgary, Alberta, 7-9 June (2005).
16. Frauenfeld, T, Deng, X., Jossy, C.: Economic analysis of thermal solvent processes, Canadian International Petroleum Conference (CIPC), 57th Annual Technical Meeting, Paper 2006-164, Calgary, Alberta, 13-15 June (2006).
17. Frauenfeld, T., Jossy, C., Bleile, J., Krispin, D., Ivory, J.: Experimental and economic analysis of thermal solvent and hybrid solvent processes. Canadian International Petroleum Conference (CIPC)/SPE Gas Technology Symposium Joint Conference (The Petroleum Society's 59th Annual Technical Meeting), Paper 2008-149, Calgary, Alberta, 17-19 June (2008).
18. Friedrich, K.: The effect of non-condensable gas on VAPEX process. M.A.Sc. Thesis, University of Waterloo, Waterloo, Ontario, Canada (2006).
19. Goite, J.G., Mamora, D.D., Fergusen, M.A.: Experimental study of Morichal heavy oil recovery using combined steam and propane injection. SPE-69566 (2001).
20. Guyer, E.C.: Handbook of applied thermal design. 1st Ed., CRC Press, (1999).
21. Ivory, J., Frauenfeld, T., Jossy, C.: Thermal solvent reflux and thermal solvent hybrid experiments. Canadian International Petroleum Conference (CIPC), 58th Annual Technical Meeting, Paper 2007-067, Calgary, Alberta, 12-14 June (2007).
22. James, L.A.: A closer look at VAPEX. M.A.Sc. Thesis, University of Waterloo, Waterloo, Ontario, Canada, (2003).
23. James, L.A.: Mass transfer mechanisms during the solvent recovery of heavy oil. Ph.D. Thesis, University of Waterloo, Waterloo, Ontario, Canada, (2009).
24. James, L., Chatzis, I.: Details of gravity drainage of heavy oil during vapor extraction. Presented at the International Society of Core Analysis, held in Abu Dhabi, UAE, 5-9 October, (2004).
25. James, L.A., Rezaei, N., Chatzis, I.: VAPEX, Warm VAPEX, and Hybrid VAPEX-The state of enhanced oil recovery for in-situ heavy oils in Canada. J. Can. Pet. Tech., 47 (4), 12-18 (2008).
26. Mamora, D.D., Rivero, J.A., Hendroyono, A., Venturini, G.J.: Experimental and simulation studies of steam-propane injection for the Hamaca and Duri fields. SPE-84201 (2003).
27. Moghadam, S., Nobakht, M., Gu, Y.: Theoretical and physical modeling of a solvent vapuor extraction process (VAPEX) process for heavy oil recovery. J. Pet. Sci. Eng., 65, 93-104 (2009).
28. Mokrys, I.J., Butler, R.M.: In-situ upgrading of heavy oil and bitumen by propane deasphalting: the VAPEX process. SPE-25452 (1993)
29. Nenniger, E.H.: Hydrocarbon recovery. Canadian Patent No. 1059432, Hatch Associates, July 31 (1979).
30. Nenniger, J., Nenniger, E.: Method and apparatus for stimulating heavy oil production. U.S. Patent No. 6883607 B2, Issued April (2005).
31. Nenniger, J.E., Dunn, S.G.: How fast is solvent based gravity drainage?, Canadian International Petroleum Conference (CIPC)/SPE Gas Technology Symposium Joint Conference (The Petroleum Society's 59th Annual Technical Meeting), Paper 2008-139, Calgary, Alberta, 17-19 June (2008).
32. Nenniger, J.E., Gunneweik, L.: Dew point vs. bubble point: A misunderstood constraint on gravity drainage processes. Canadian International Petroleum Conference (CIPC), 60th Annual Technical Meeting, Paper 2009-065, Calgary, Alberta, 16-18 June (2009).
33. Oduntan, A.R.: Heavy oil recovery using the VAPEX process: scale-up and the mass transfer issues. M.A.Sc. Thesis, University of Waterloo, Waterloo, Ontario, Canada (2001).
34. Prausnitz, J.M., Lichtenthaler, R.N., Azevedo, E.G.: Molecular thermodynamics of fluid-phase Equilibria. 3rd Edn, Prentice-Hall Inc., Englewood Cliffs, NJ (1998).
35. Ramakrishnan, V.: In-situ recovery of heavy oil by VAPEX using propane. M.A.Sc. Thesis, University of Waterloo, Waterloo, Ontario, Canada (2003).
36. Rivero, J.A., Mamora, D.D.: Production acceleration and injectivity enhancement using steam-propane injection for Hamaca extra-heavy oil. SPE-75129 (2002).
37. Roth, A.: Vacuum technology. 3rd Ed., North-Holland, (1990).
38. Shu, W.R.: A viscosity correlation for mixtures of heavy oil, bitumen and petroleum fractions. SPE J. 277-287 (June 1984).
39. Sierra, R., Tripathy, B., Bridges, J.E., Farouq Ali, S.M.: Promising progress in field application of reservoir electrical heating methods. SPE-69709 (2001).
40. Speight, J.G.: Handbook of petroleum analysis. John Wiley and Sons Inc., (2001).
41. STATISTICA Release 8, StatSoft® Inc., Tulsa, OK, USA (2009).
42. Yazdani, A., Maini, B.: Effect of drainage height and grain size on production rates in the VAPEX process: Experimental study. SPE-89409, SPE Res. Eval. & Eng., 205-213 (2005).