Investigation of the applicability of Design for X tools during design concept evolution: A literature review

International Journal of Product Development

Volumn 13, Issue 2, 2011, Pages 132-167

  Chiu, Ming Chuan ^a   Okudan Kremer, Gül E ^a  

^a The Pennsylvania State University   (United States)

Author keywords

Design for efficiency; Design for X; DfX maturity index; DFX structure; Engineering design process; Green design

Indexed keywords

EID: 79952407612     PISSN: 14779056     EISSN: 17418178     Source Type: Journal    
DOI: 10.1504/IJPD.2011.038869     Document Type: Article

References (85)

1. Appelqvist, P., Lehtonen, J.M. and Kokkonen, J. (2004) 'Modeling in product and supply chain design: Literature survey and case study', Journal of Manufacturing Technology Management, Vol. 15, No. 7, pp.675-685.
2. Bicknell, B.A. and Bicknell, K.D. (1995) The Road Map to Repeatable Success - Using QFD to Implement Change, CRC Press, Boca Raton, FL.
3. Blackhurst, J., Wu, T. and O'Grady, P. (2005) 'PCDM: A decision support modeling methodology for supply chain, product and process design decisions', Journal of Operations Management, Vol. 23, Nos. 3-4, pp.325-343. (Pubitemid 40357123)
4. Boothroyd, G. (1994) 'Product design for manufacture and assembly', Computer Aided Design, Vol. 26, No. 7, pp.505-520.
5. Boothroyd, G. and Alting, L. (1992) 'Design for assembly and disassembly', Annals of CIRP, Vol. 41, No. 2, pp.625-636. (Pubitemid 23606280)
6. Chen, C. (2001) 'Design for the environment: A quality-based model for green product development', Management Science, Vol. 47, No. 2, pp.250-263. (Pubitemid 34192762)
7. Choi, A.C.K., Chan, D.S.K. and Yuen, A.M.F. (2002) 'Application of virtual assembly tools for improving product design', International Journal of Advanced Manufacturing Technology, Vol. 19, No. 5, pp.377-383. (Pubitemid 34566626)
8. Coma, O., Mascle, C. and Balazinski, M. (2004) 'Application of a fuzzy decision support system in a design for assembly methodology', International Journal of Computer Integrated Manufacturing, Vol. 17, No. 1, pp.83-94.
9. Consoli, F., Allen, D., Boustead, I., Fava, J., Franklin, W., Jensen, A., Oude, N.D., Parrish, R., Perriman, R., Postlethewaite, D., Quay, B., Séguin, J. and Vigon, B. (1993) Guidelines for Life-Cycle Assessment: A Code of Practice, SETAC Publication, Berlin, Germany.
10. Daabub, A.M. and Abdalla, H.S. (1999) 'A Computer-based intelligent system for design for assembly', Computers and Industrial Engineering, Vol. 37, Nos. 1-2, pp.111-115.
11. Das, S.K., Datla, V. and Samir, G. (2000) 'DFQM - an approach for improving the quality of assembled products', International Journal of Production Research, Vol. 38, No. 2, pp.457-477. (Pubitemid 35395487)
12. De Fazio, T.L., Rhee, S.J. and Whitney, D.E. (1999) 'Design-specific approach to Design for Assembly (DFA) for complex mechanical assemblies', IEEE Transactions on Robotics and Automation, Vol. 15, No. 5, pp.869-881. (Pubitemid 30514355)
13. Desai, A. and Mital, A. (2003) 'Evaluation of disassemblability to enable design for disassembly in mass production', International Journal of Industrial Ergonomics, Vol. 32, No. 4, pp.265-281. (Pubitemid 36962901)
14. Desai, A. and Mital, A. (2005) 'Incorporating work factors in design for disassembly in product design', Journal of Manufacturing Technology Management, Vol. 16, No. 7, pp.712-732. (Pubitemid 41314600)
15. Desai, A. and Mital, A. (2006) 'Design for maintenance: Basic concepts and review of literature', International Journal of Product Development, Vol. 3, No. 1, pp.77-121. (Pubitemid 43432451)
16. Donnelly, K., Beckett-Furnell, Z., Traeger, S., Okrasinski, T. and Holman, S. (2006) 'Eco-design implemented through a product-based environmental management system', Journal of Cleaner Production, Vol. 14, Nos. 15-16, pp.1357-1367.
17. Dowlatshahi, S. (1996) 'Role of logistics in concurrent engineering', International Journal of Production Economics, Vol. 44, No. 3, pp.189-199.
18. Durai Prabhakaran, R.T., Babu, B.J.C. and Agrawal, V.P. (2006) 'Design for 'X'-abilities of RTM products - a graph theoretic approach', Concurrent Engineering Research and Applications, Vol. 14, No. 2, pp.151-161. (Pubitemid 43842407)
19. Environmental Protection Agency (EPA) (1994) Development of a Pollution Prevention Factors Methodology Based on Life-Cycle Assessment: Lithographic Printing Case Study, Office of Research and Development, EPA Publication, Washington DC.
20. Esawi, A.M.K. and Ashby, M.F. (2004) 'Computer-based selection of joining processes, methods, software and case studies', Materials and Design, Vol. 25, No. 7, pp.555-564. (Pubitemid 38767934)
21. Fabricius, F. (1994) 'Seven step procedure for design for manufacture', World Class Design for Manufacture, Vol. 1, No. 2, pp.23-30.
22. Fabrycky, W.J. and Blanchard, B.S. (1991) Life-Cycle Cost and Economics Analysis, Prentice-Hall, New Jersey, USA.
23. Feldmann, K., Meedt, O., Trautner, S., Scheller, H. and Hoffman, W. (2000) 'Green design advisor: A tool for design for environment', Journal of Electronics Manufacturing, Vol. 9, No. 1, pp.17-28. (Pubitemid 30567224)
24. Fitch, P. and Cooper, J.S. (2005) 'Life-cycle modeling for adaptive and variant design. Part 1: Methodology', Research in Engineering Design, Vol. 15, No. 4, pp.216-228. (Pubitemid 40454294)
25. Fixson, S.K. (2005) 'Product architecture assessment: A tool to link product, process, and supply chain design decisions', Journal of Operations Management, Vol. 23, Nos. 3-4, pp.345-369. (Pubitemid 40357124)
26. Fixson, S.K. (2007) 'Modularity and commonality research: Past developments and future opportunities', Concurrent Engineering Research and Applications, Vol. 15, No. 2, pp.85-111. (Pubitemid 46939344)
27. Fujita, K. (2002) 'Product variety optimization under modular architecture', CAD Computer Aided Design, Vol. 34, No. 12, pp.953-965. (Pubitemid 34678648)
28. Fujita, K., Sakaguchi, H. and Akagi, S. (1999) 'Product variety deployment and its optimization under modular architecture and module communalization', Paper presented at ASME Design Engineering Technical Conferences and Computers in Engineering Conference, 12-15 September, Las Vegas, Nevada, USA.
29. Garg, A. (1999) 'An application of designing products and processes for supply chain management', IIE Transactions, Vol. 31, No. 5, pp.417-429.
30. Gershenson, J.K., Prasad, G.J. and Zhang, Y. (2004) 'Product modularity: Measures and design methods', Journal of Engineering Design, Vol. 15, No. 1, pp.33-51. (Pubitemid 38127449)
31. Gironimo, G.D., Lanzotti, A. and Vanacore, A. (2006) 'Concept design for quality in virtual environment', Computers and Graphics, Vol. 30, No. 6, pp.1011-1019. (Pubitemid 44750190)
32. Goncalves-Coelho, A.M. and Mourao, A.J.F. (2007) 'Axiomatic design as support for decision-making in a design for manufacturing context: A case study', International Journal of Production Economics, Vol. 109, Nos. 1-2, pp.81-89. (Pubitemid 46977195)
33. Graves, S.C. and Willems, S.P. (2005) 'Optimizing the supply chain configuration for new products', Management Science, Vol. 51, No. 8, pp.1165-1180. (Pubitemid 41344648)
34. Gu, P., Hashemian, M. and Nee, A.Y.C. (2004) 'Adaptable design', CIRP Annals - Manufacturing Technology, Vol. 53, No. 2, pp.539-557. (Pubitemid 40118860)
35. Guinée, J.B. (2002) Handbook on Life Cycle Assessment: Operational Guide to the ISO Standards, Kluwer Academic Publishers, Berlin.
36. Güngör, A. (2006) 'Evaluation of connection types in Design for Disassembly (DFD) using analytic network process', Computers and Industrial Engineering, Vol. 50, Nos. 1-2, pp.35-54. (Pubitemid 43816787)
37. Gupta, S. and Okudan, G.E. (2008) 'Computational modularized conceptual designs with assembly and variety considerations', Journal of Engineering Design, Vol. 19, No. 6, pp.533-551.
38. Gupta, S.K., Chen, S.F., Feng, S. and Sriram, R. (2003) 'A system for generating process and material selection advice during embodiment design of mechanical components', Journal of Manufacturing Systems, Vol. 22, No. 1, pp.28-45.
39. Harjula, T., Rapoza, B., Knight, W.A. and Boothroyd, G. (1996) 'Design for disassembly and the environment', CIRP Annals - Manufacturing Technology, Vol. 45, No. 1, pp.109-114.
40. Herrmann, J.W., Cooper, J., Gupta, S.K., Hayes, C.C., Ishii, K., Kazmer, D., Sandborn, P.A. and Wood, W.H. (2004) 'New directions in design for manufacturing', Paper presented at ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 28 September-2 October, Salt Lake City, Utah, USA.
41. Houe, R. and Grabot, B. (2007) 'Knowledge modeling for eco-design', Concurrent Engineering Research and Applications, Vol. 14, No. 1, pp.7-20. (Pubitemid 46381269)
42. Howarth, G. and Hadfield, M. (2006) 'A sustainable product design model', Materials and Design, Vol. 27, No.10, pp.1128-1133. (Pubitemid 44109095)
43. Huang, G.Q. and Mak, K.L. (1999) 'Design for manufacture and assembly on the internet', Computers in Industry, Vol. 38, No. 1, pp.17-30.
44. Ijomah, W.L., McMahon, C.A., Hammond, G.P. and Newman, S.T. (2007) 'Development of robust design-for-remanufacturing guidelines to further the aims of sustainable development', International Journal of Production Research, Vol. 45, Nos. 18-19, pp.4513-4536. (Pubitemid 47351670)
45. Ireson, W.G. (1995) Handbook of Reliability Engineering and Management, McGraw-Hill, New York.
46. Jiao, J., Simpson, T.W. and Siddique, Z. (2007) 'Product family design and platform-based product development: A state-of-the-art review', Journal of Intelligent Manufacturing, Vol. 18, No. 1, pp.5-29. (Pubitemid 47109440)
47. Johansson, E. and Johansson, M.I. (2004) 'The information gap between design engineering and materials supply systems design', International Journal of Production Research, Vol. 42, No. 17, pp.3787-3801.
48. Kasarda, M.E., Terpenny, J.P., Inman, D., Precoda, K.R., Jelesko, J., Sahin, A. and Park, J. (2007) 'Design for Adaptability (DFAD) - a new concept for achieving sustainable design', Robotics and Computer-Integrated Manufacturing, Vol. 23, No. 6, pp.727-734. (Pubitemid 47239328)
49. Kaymaz, I. and McMahon, C.A. (2004) 'A probabilistic design system for reliability-based design optimization', Structural and Multidisciplinary Optimization, Vol. 28, No. 6, pp.416-426.
50. Keoleian, G.A. (1993) 'Application of life cycle assessment to design', Journal of Cleaner Production, Vol. 1, Nos. 3-4, pp.143-149.
51. Keys, L.K. (1990) 'System life cycle engineering and DF'X'', IEEE Trans. on Components, Hybrids, and Manufacturing Technology, Vol. 13, No. 1, March, pp.83-93. (Pubitemid 20737435)
52. Knight, W.A. and Sodhi, M. (2000) 'Design for bulk recycling: Analysis of materials separation', CIRP Annals - Manufacturing Technology, Vol. 49, No. 1, pp.83-86.
53. Kobayashi, H. (2005) 'Strategic evolution of eco-products: A product life cycle planning methodology', Research in Engineering Design, Vol. 16, Nos. 1-2, pp.1-16. (Pubitemid 41604349)
54. Koch, P.N., Yang, R-J. and Gu, L. (2004) 'Design for six sigma through robust optimization', Structural and Multidisciplinary Optimization, Vol. 26, Nos. 3-4, pp.235-248.
55. Korpalski, T. (1996) 'Role of the 'product steward' in advancing design for environment in Hewlett-Packard's computer products organization', Paper presented at IEEE International Symposium on Electronics and the Environment, 6-8 May, Dallas, Texas.
56. Kriwet, A., Zussman, E. and Seliger, G. (1995) 'Systematic integration of design-for-recycling into product design', International Journal of Production Economics, Vol. 38, No. 1, pp.15-32.
57. Kuo, T., Huang, S. and Zhang, H. (2001) 'Design for manufacture and design for X-conceptsapplications and perspectives', Computers and Industrial Engineering, Vol. 41, pp.241-260.
58. Kuo, T.C. (2000) 'Disassembly sequence and cost analysis for electromechanical products', Robotics and Computer-integrated Manufacturing, Vol. 16, No. 1, pp.43-54. (Pubitemid 30559704)
59. Kuo, T.C., Zhang, H.C. and Huang, S.H. (2000) 'Disassembly analysis for electromechanical products: A graph-based heuristic approach', International Journal of Production Research, Vol. 38, No. 5, pp.993-1007. (Pubitemid 35395529)
60. La Trobe-Bateman, J. and Wild, D. (2003) 'Design for manufacturing: use of a spreadsheet model of manufacturability to optimize product design and development', Research in Engineering Design, Vol. 14, No. 2, pp.107-117.
61. Lamothe, J., Hadj-Hamou, K. and Aldanondo, M. (2006) 'An optimization model for selecting a product family and designing its supply chain', European Journal of Operational Research, Vol. 169, No. 3, pp.1030-1047. (Pubitemid 41492031)
62. Lee, H.L. and Sasser, M.M. (1995) 'Product universality and design for supply chain management', Production Planning and Control, Vol. 6, No. 3, pp.270-27.
63. Lee, I., Choi, K.K., Liu, D. and Gorsich, D. (2008) 'Dimension reduction method for reliability-based robust design optimization', Computers and Structures, Vol. 86, Nos. 13-14, pp.1550-1562. (Pubitemid 351609089)
64. Lin, M., Tai, Y., Chen, M. and Chang, C.A. (2007) 'A rule based assembly sequence generation method for product design', Concurrent Engineering Research and Applications, Vol. 15, No. 3, pp.291-308. (Pubitemid 47505998)
65. Liu, E. and Hsiao, S. (2006) 'ANP-GP approach for product variety design', International Journal of Advanced Manufacturing Technology, Vol. 29, Nos. 3-4, pp.216-225. (Pubitemid 43814093)
66. Simpson, T.W. (2004) 'Product platform design and customization: Status and promise', Artificial Intelligence for Engineering Design, Analysis and Manufacturing, Vol. 18, No. 1, pp.3-20. (Pubitemid 40302535)
67. Singh, P. and Sandborn, P. (2006) 'Obsolescence driven design refresh planning for sustainment-dominated systems', Engineering Economist, Vol. 51, No. 2, pp.115-139. (Pubitemid 43852895)
68. Sireli, Y., Kauffmann, P. and Ozan, E. (2007) 'Integration of Kano's model into QFD for multiple product design', IEEE Transactions on Engineering Management, Vol. 54, No. 2, pp.380-390. (Pubitemid 46681196)
69. Smith, C.S., Wright, P.K. and Sequin, C. (2003) 'The manufacturing advisory service: web-based process and material selection', International Journal of Computer Integrated Manufacturing, Vol. 16, No. 6, pp.373-381.
70. Steadman, S. and Pell, K.M. (1995) 'Expert systems in engineering design: An application for injection molding of plastic parts', Journal of Intelligent Manufacturing, Vol. 6, No. 5, pp.347-353.
71. Stoll, H.W. (1988) 'Design for manufacture', Manufacturing Engineering, Vol. 100, No. 1, pp.67-73.
72. Suh, N.P. (1995) 'Designing-in of quality through axiomatic design', IEEE Transactions on Reliability, Vol. 44, No. 2, pp.256-264.
73. Umeda, Y., Fukushige, S., Tonoike, K. and Kondoh, S. (2008) 'Product modularity for life cycle design', CIRP Annals - Manufacturing Technology, Vol. 57, No. 1, pp.13-16.
74. Vairaktarakis, G.L. (1999) 'Optimization tools for design and marketing of new/improved products using the house of quality', Journal of Operations Management, Vol. 17, No. 6, pp.645-663. (Pubitemid 129591351)
75. van Vliet, H.W. and van Luttervelt, K. (2004) 'Development and application of a mixed product/process-based DFM methodology', International Journal of Computer Integrated Manufacturing, Vol. 17, No. 3, pp.224-234.
76. Vezzoli, C. and Sciama, D. (2006) 'Life cycle design: From general methods to product type specific guidelines and checklists: A method adopted to develop a set of guideline/checklist handbook for the eco-efficient design of NECTA vending machines', Journal of Cleaner Production, Vol. 14, pp.1319-1325. (Pubitemid 43975772)
77. Waage, S.A. (2007) 'Re-considering product design: A practical 'road-map' for integration of sustainability issues', Journal of Cleaner Production, Vol. 15, No. 7, pp.638-649. (Pubitemid 44879919)
78. Wang, J. and Shu, Y. (2007) 'A possibilistic decision model for new product supply chain design', European Journal of Operational Research, Vol. 177, No. 2, pp.1044-1061.
79. Warnecke, H.J. and Babler, R. (1988) 'Design for assembly - part of design process', Annals of CIRP, Vol. 37, No. 1, pp.1-4.
80. Wittenburg, G. (1992) 'Life after death for consumer product: Design for disassembly', Assembly Automation, Vol. 12, No. 2, pp.21-25.
81. World Commission on Environment and Development Report (WECD) (1987) From One Earth to One World: An Overview, World Commission on Environment and Development (WECD), Oxford University Press, Oxford.
82. Xiao, A., Seepersad, C.C., Allen, J.K., Rosen, D.W. and Mistree, F. (2007) 'Design for manufacturing: Application of collaborative multidisciplinary decision-making methodology', Engineering Optimization, Vol. 39, No. 4, pp.429-451. (Pubitemid 46791621)
83. Zha, X.F., Lim, S.Y.E. and Fok, S.C. (1999) 'Development of expert system for concurrent product design and planning for assembly', International Journal of Advanced Manufacturing Technology, Vol. 15, No. 3, pp.153-162.
84. Zhang, H.C. and Kuo, T.C. (1996) 'Graph-based approach to disassembly model for end-of-life product recycling', Paper presented at IEEE/CPMT International Electronics Manufacturing Technology (IEMT) Symposium, 14-16 October, Austin, TX, USA.
85. Zussman, E., Kriwet, A. and Seliger, G. (1994) 'Disassembly-oriented assessment methodology to support design for recycling', Annals of CIRP, Vol. 43, No. 1, pp.9-14.