Near infrared hyperspectral imaging applied to mapping chemical composition in wood samples

Journal of Near Infrared Spectroscopy

Volumn 18, Issue 6, 2010, Pages 507-515

  Thumm, Armin ^a   Riddell, Marc ^a   Nanayakkara, Bernadette ^a   Harrington, Jonathan ^a   Meder, Roger ^b  

^a SCION   (New Zealand)

^b CSIRO   (Australia)

Author keywords

Chemical mapping; Imaging spectrograph; NIR camera; Pinus radiata; Wood quality

Indexed keywords

CAMERAS; COST EFFECTIVENESS; FORESTRY; GLUCOSE; IMAGE RESOLUTION; INFRARED DEVICES; LEAST SQUARES APPROXIMATIONS; LIGNIN; MAPPING; NEAR INFRARED SPECTROSCOPY; SPECTROGRAPHS;

CHEMICAL MAPPING; IMAGING SPECTROGRAPH; NIR CAMERA; PINUS RADIATA; WOOD QUALITIES;

HYPERSPECTRAL IMAGING;

EID: 79952334193     PISSN: 09670335     EISSN: None     Source Type: Journal    
DOI: 10.1255/jnirs.909     Document Type: Article

References (32)

1. P.D. Jones, L.R. Schimleck, G.F. Peter, R.F. Daniels and A. Clark III, "Nondestructive estimation of wood chemical composition of sections of radial wood strips by diffuse reflectance near infrared spectroscopy", Wood Sci. Technol. 40, 8 (2006). doi: 10.1007/s00226-006-0085-6 (Pubitemid 44825911)
2. R. Meder, D. Marston, N. Ebdon and R. Evans, "Spatially resolved radial scanning of tree increment cores for NIRprediction of wood properties", J. Near Infrared Spectrosc. 18, 499-505 (2010). doi: 10.1255/jnirs.903
3. G.M. Downes, R. Meder, C. Harwood, R. Evans, N. Ebdon, H. Bond, K. Joyce and S. Southerton, "Radial variation in cellulose content and Kraft pulp yield in Eucalyptus nitens using NIRspectral analysis of air-dry wood surfaces", J. Near Infrared Spectrosc. 18, 147 (2010). doi: 10.1255/jnirs.875
4. T.E. Timell, Compression Wood in Gymnosperms (Vol. 1). Springer Verlag, Berlin (1986).
5. B. Nanayakkara, M. Manley-Harris, I.D. Suckling and L.A. Donaldson, "Quantitative chemical indicators to assess the gradation of compression wood", Holzforschung 63, 4 (2009). doi: 10.1515/HF.2009.062
6. R. Meder, S.S. Gallagher, M.O. Kimberley, J.M. Uprichard and K.L. Mackie, Prediction of wood chip and pulp and paper properties via multivariate analysis of spectral data. 48th Appita Annual General Conference, May 2-6, Melbourne, Australia, pp. 479-484 (1994).
7. S.S. Kelley, T.G. Rials, R. Snell, L.H. Groom and A. Sluiter, "Use of near infrared spectroscopy to measure the chemical and mechanical properties of solid wood", Wood Sci. Technol. 38, 4 (2004). doi: 10.1007/s00226-003- 0213-5
8. M.D. Birkett and M.J.T. Gambino, "Potential applications for near-infrared spectroscopy in the pulping industry", Paper Southern Africa December (1988).
9. D.B. Easty, S.A. Berben, F.A. DeThomas and P.J. Brimmer, "Near-infrared spectroscopy for the analysis of wood pulp: quantifying hardwood-softwood mixtures and estimating lignin content", Tappi J. 73, 10 (1990).
10. J.A. Wright, M.D. Birkett and M.J.T. Gambino, "Prediction of pulp yield and cellulose content from wood samples using near infrared reflectance spectroscopy", Tappi J. 73, 8 (1990).
11. A.J. Michell, "Pulpwood quality estimation by near-infrared spectroscopic measurements on eucalypt woods", Appita J. 48, 6 (1995).
12. L.R. Schimleck, A.J. Michell and P. Vinden, "Eucalypt wood classification by NIRspectroscopy and principal components analysis", Appita J. 49, 5 (1996).
13. H. Antti, D. Alexandersson, M. Sjöstrom and L. Wallbäcks, "Detection of kappa number distributions in Kraft pulps using NIRspectroscopy and multivariate calibration", Tappi J. 83, 3 (2000).
14. P. Hoffmeyer and J. Pedersen, "Evaluation of density and strength of Norway spruce wood by near infrared spectroscopy", Holz Roh Werkst. 53, 165 (1995). doi: 10.1007/BF02716418
15. A. Thumm and R. Meder, "Stiffness prediction of radiata pine clearwood test pieces using NIRspectroscopy", J. Near Infrared Spectrosc. 9(2), 117-122 (2001). doi: 10.1255/jnirs.298
16. R. Meder, A. Thumm and H. Bier, "Veneer stiffness predicted by NIRspectroscopy calibrated using mini-LVLtest panels", Holz Roh Werkst. 60(3), 159-164 (2002). doi: 10.1007/s00107-002-0296-y (Pubitemid 35289641)
17. L.R. Schimleck and R. Evans. "Estimation of microfibril angle of increment cores by near infrared spectroscopy", IAWA J. 23(3), 225-234 (2002). (Pubitemid 34995695)
18. R. Meder, A. Thumm and D. Marston, "Sawmill trial of at-line prediction of recovered lumber stiffness by NIRspectroscopy of Pinus radiata pine cants", J. Near Infrared Spectrosc. 11, 137-143 (2003). doi: 10.1255/jnirs.361 (Pubitemid 36745404)
19. C.L. So, L.H. Groom, T.G. Rials, R. Snell, S.S. Kelley and R.R. Meglen, Rapid assessment of the fundamental property variation in wood. Proceedings of the Eleventh Biennial Southern Silvicultural Research Conference (2002).
20. O. Hagman, "Multivariate prediction of wood surface features using an imaging spectrograph", Holz Roh Werkst. 55, 6 (1997). doi: 10.1007/s001070050250
21. O. Hagman and J. Nystrom, "Real-time classification of compression wood in Picea abies", J. Wood Sci. 45, 1 (1999).
22. P. Duncker and H. Spiecker, "Detection and classification of Norway spruce compression wood in reflected light by means of hyperspectral image analysis", IAWA J. 30, 1 (2009).
23. J. Lee and R. Brownlie, "Assessment of the end grain of log ends and log discs", Scion Wood Processing Newsletter 43 (2009).
24. R. Evans, "Rapid measurement of the transverse dimensions of tracheids in radial wood sections from Pinus radiata", Holzforschung 48, 2 (1994). doi: 10.1515/hfsg.1994.48.2.168
25. R. Evans, "Variance approach to the X-ray diffractometric estimation of microfibril angle in wood", Appita J. 52, 4 (1999).
26. A. Savitzky and M.J.E. Golay, "Smoothing and differentiation of data by simplified least squares procedures", Anal. Chem. 36, 8 (1964). doi: 10.1021/ac60214a047
27. J. Steiner, Y. Termonia and J. Deltour, "Comments on smoothing and differentiation of data by simplified least squares procedure", Anal. Chem. 44, 11 (1972).
28. G.R. Phillips and J.M. Harris, "Polynomial filters for data sets with outlying or missing observations: Application to charge-coupled-device- detected Raman spectra contaminated by cosmic rays", Anal. Chem. 62, 11 (1990). doi: 10.1021/ac00220a017
29. T. Næs, T. Isaksson, T. Fearn and T. Davies, A User Friendly Guide to Multivariate Calibration and Classification. NIRPublications, Chichester, UK (2002).
30. L. Jing, W.F. McClure, F.E. Barton, D.S. Himmelsbach, "Effect of random noise on the performance of NIRcalibrations" J. Near Infrared Spectrosc. 6, 77 (1998). doi: 10.1255/jnirs.124
31. S. Yao, M. Xing, S. Zhou, G. Wu, Y. Jiang and J. Pu, "The accuracy of near infrared prediction of hemicellulose content arising from varying introduced errors", J. Near Infrared Spectrosc. 18, 397-402 (2010). doi: 10.1255/jnirs.908
32. L.R. Schimleck, P.D. Jones, G.F. Peter, R.F. Daniels and A. Clark, "Success in using near infrared spectroscopy to estimate wood properties of Pinus taeda radial strips not due to autocorrelation", J. Near Infrared Spectrosc. 13, 47 (2005). doi: 10.1255/jnirs.456