The effect of high fiber fraction on some mechanical properties of unidirectional glass fiber-reinforced composite

Dental Materials

Volumn 27, Issue 4, 2011, Pages 313-321

  Abdulmajeed, Aous A ^a,b   Närhi, Timo O ^a,b,c   Vallittu, Pekka K ^a,b   Lassila, Lippo V ^a,b  

^a UNIVERSITY OF TURKU   (Finland)

^b UNIVERSITY OF TURKU   (Finland)

^c TURKU UNIVERSITY HOSPITAL   (Finland)

Author keywords

Dental materials; Fiber density; Fiber reinforced composite; Mechanical properties

Indexed keywords

ANOVA ANALYSIS; BIS-GMA; CYLINDRICAL SPECIMENS; E-GLASS FIBERS; ELEVATED TEMPERATURE; FIBER FRACTIONS; FIBER-REINFORCED COMPOSITE; FLEXURAL STRENGTH; LOAD-BEARING CAPACITY; MODULUS OF ELASTICITY; PARTICULATE FILLERS; ROOM TEMPERATURE; SILICATE GLASS; THREE-POINT BENDING TEST;

BARIUM; BEARING CAPACITY; BEARINGS (STRUCTURAL); BENDING STRENGTH; CURING; CYLINDERS (SHAPES); DENSITY (SPECIFIC GRAVITY); DENTAL PROSTHESES; ELASTIC MODULI; FIBER REINFORCED PLASTICS; FIBERS; FILLERS; GLASS FIBERS; INSTRUMENT TESTING; MATERIALS PROPERTIES; RESINS; SILICATES;

MECHANICAL PROPERTIES;

ALUMINUM SILICATE; BARIUM DERIVATIVE; BARIUM GLASS FILLER; BIOMEDICAL AND DENTAL MATERIALS; BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; GLASS; GLASS FIBER; MACROGOL DERIVATIVE; POLY(METHYL METHACRYLATE); POLYMETHACRYLIC ACID DERIVATIVE; RESIN; SILANE DERIVATIVE; SILICON DIOXIDE; STICK RESIN; TRIETHYLENE GLYCOL DIMETHACRYLATE;

ARTICLE; CHEMISTRY; DENTAL BONDING; HUMAN; MATERIALS TESTING; MECHANICAL STRESS; MECHANICS; PLIABILITY; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; TEMPERATURE; TIME; YOUNG MODULUS;

ALUMINUM SILICATES; BARIUM COMPOUNDS; BISPHENOL A-GLYCIDYL METHACRYLATE; COMPOSITE RESINS; DENTAL MATERIALS; ELASTIC MODULUS; GLASS; HUMANS; LIGHT-CURING OF DENTAL ADHESIVES; MATERIALS TESTING; MECHANICAL PHENOMENA; MICROSCOPY, ELECTRON, SCANNING; PLIABILITY; POLYETHYLENE GLYCOLS; POLYMETHACRYLIC ACIDS; POLYMETHYL METHACRYLATE; SILANES; SILICON DIOXIDE; STRESS, MECHANICAL; SURFACE PROPERTIES; TEMPERATURE; TIME FACTORS;

EID: 79952282425     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2010.11.007     Document Type: Article

References (49)

1. S.L.-Y. Woo, W.H. Akeson, B. Levenetz, R.D. Coutts, J.V. Matthews, and D. Amiel Potential application of graphite fiber and methylmethacylate resin composites as internal fixation plates J Biomed Mater Res 8 1974 321 338
2. P.K. Vallittu Flexural properties of acrylic polymers reinforced with unidirectional and woven glass fibers J Prosthet Dent 81 1999 18 26
3. H.K. Körber, and S. Körber Experimentelle untersuchungen zur passgenauigkeit von GFK Brückenger. usten 'Vectris' Quintessenz Zahntech 24 1998 43 53
4. P.K. Vallittu The effect of glass fiber reinforcement on the fracture resistance of a provisional fixed partial denture J Prosthet Dent 79 1998 125 130
5. P.K. Vallittu Glass fiber reinforcement in repaired acrylic resin removable dentures: preliminary results of a clinical study Quintessence Int 28 1997 39 44 (Pubitemid 127712253)
6. J. Friskopp, and L. Blomlof Intermediate fiberglass splints J Prosthet Dent 51 1984 334 337
7. Ballo A. Fiber-reinforced composite as oral implant material: experimental studies of glass fiber and bioactive glass in vitro and in vivo. Doctoral dissertation. Finland University of Turku, Turku; 2008.
8. Mattila R. Non-resorbable glass fiber-reinforced composite with porous surface as bone substitute material: experimental studies in vitro and in vivo focused on bone-implant interface. Doctoral dissertation. Finland University of Turku, Turku; 2009.
9. S.M. Tuusa, M.J. Peltola, T. Tirri, L.V. Lassila, and P.K. Vallittu Frontal bone defect repair with experimental glass-fiber-reinforced composite with bioactive glass granule coating J Biomed Mater Res B: Appl Biomater 82 2007 149 155 (Pubitemid 47015364)
10. P.K. Vallittu Curing of a silane coupling agent and its effect on the transverse strength of autopolymerizing polymethylmethacrylate glass fiber composite J Oral Rehabil 24 1997 124 130 (Pubitemid 127732024)
11. P.K. Vallittu Some aspects of the tensile strength of unidirectional glass fiber-polymethyl-methacrylate composite used in dentures J Oral Rehabil 25 1998 100 105 (Pubitemid 128704906)
12. P.K. Vallittu The effect of void space and polymerization time on transverse strength of acrylic-glass fiber composite J Oral Rehabil 22 1995 257 261
13. V.M. Miettinen, and P.K. Vallittu Water sorption and solubility of glass fiber-reinforced denture polymethyl methacrylate resin J Prosthet Dent 77 1997 531 534
14. P.K. Vallittu Experiences of using glass fibers with multiphase acrylic resin systems. Theoretical background and clinical examples P.K. Vallittu, The first international symposium on fiber-reinforced plastics in dentistry 27-29 August 1998, Turku Finland. University of Turku, Institute of Dentistry and Biomaterials Project 1999
15. A. Hensten-Pettersen Skin and mucosa reactions associated with dental materials Eur J Oral Sci 106 1998 707 712 (Pubitemid 128737078)
16. M.A. Loza-Herrer, and F.A. Rueggeberg Time temperature profiles of post-cure composite oven Gen Dent 46 1998 79 83
17. M.A. Loza-Herrero, F.A. Rueggeberg, W.F. Caughman, G.S. Schuster, C.A. Lefebvre, and F.M. Gardner Effect of heating delay on conversion and strength of a post-cured resin composite J Dent Res 77 1998 426 431 (Pubitemid 32770481)
18. D.H. Isaac Engineering aspects of the structure and properties of polymer-fiber composites P.K. Vallittu, The first international symposium on fiber-reinforced plastics in dentistry 27-29 August 1998, Turku Finland. University of Turku, Institute of Dentistry & Biomaterials Project 1999
19. P.K. Vallittu Flexural properties of acrylic resin polymers reinforced with unidirectional and woven fibers J Prosthet Dent 81 1999 318 326
20. P.K. Vallittu, and K. Narva Impact strength of a modified continuous glass fiber-poly(methyl methacrylate) Int J Prosthodont 10 1997 142 148 (Pubitemid 127501429)
21. G. Zanghellini Faserverstärkung - die Festigkeit ist eine Funktion des Volumenanteils der Fasern im FRC-Werkstoff Phillip J 14 1997 390 393
22. S.R. Dyer, L.V. Lassila, M. Jokinen, and P.K. Vallittu Effect of fiber position and orientation on fracture load of fiber-reinforced composite Dent Mater 20 2004 947 955 (Pubitemid 40146124)
23. W.H. Craig, and T.H. Courtney On the tension test as a means of characterizing fiber composite failure mode J Mater Sci 10 1975 1119 1126
24. C. Herakovich Mechanics of fiber composites 305 1998 Wiley New York 322-359
25. L.B. Lum, and J.F. Osier Load transfer from endosteal implants to supporting bone: an analysis using statics Part two: axial loading J Oral Implantol 18 4 1992 349 353
26. P.K. Vallittu Effect of 180-week water storage on the flexural properties of E-glass and silica fiber acrylic resin composite Int J Prosthodont 13 2000 334 339
27. D.S. Zhao, N. Moritz, and P. Laurila Development of a multicomponent fiber-reinforced composite implant for load-sharing conditions Med Eng Phys 31 4 2009 461 469
28. M.P. Hautamaki, A.J. Aho, and P. Alander Repair of bone segment defects with surface porous fiber-reinforced polymethyl methacrylate (PMMA) composite prosthesis: histomorphometric incorporation model and characterization by SEM Acta Orthop 79 4 2008 555 564
29. S.M. Tuusa, M.J. Peltola, and T. Tirri Reconstruction of critical size calvarial bone defects in rabbits with glass-fiber-reinforced composite with bioactive glass granule coating J Biomed Mater Res B Appl Biomater 84 2 2008 510 519
30. A.M. Ballo, L.V. Lassila, P.K. Vallittu, and T.O. Närhi Load bearing capacity of bone anchored fiber-reinforced composite J Mater Sci Mater Med 18 2007 2025 2031 (Pubitemid 47421902)
31. A.M. Ballo, E. Akca, T. Ozen, L.V. Lassila, P.K. Vallittu, and T.O. Närhi Bone tissue responses to glass fiber reinforced composite implants - a histomorphometric study Clin Oral Implants Res 20 2009 608 615
32. T. Albrektsson, and A. Wennerberg Oral implant surfaces: Part 1-review focusing on topographic and chemical properties of different surfaces and in vivo responses to them Int J Prosthodont 17 2004 536 543 (Pubitemid 39360697)
33. A. Piattelli, A. Scarano, L. Favero, G. Iezzi, G. Petrone, and G.A. Favero implants removed due to mobility J Periodontol 74 2003 385 390
34. J.E. Lemons Unanticipated outcomes: dental implants Implant Dent 7 4 1998 351 353
35. J.B. Brunski, and R. Skalak Biomechanical considerations for craniofacial implants P-I. Branemark, D.E. Tolman, Osseointegration in craniofacial reconstruction 2 1998 Quintessence Publishing Co., Inc. Carol Stream, IL 15 36
36. O'Brien, and J. William Dental materials and their selection 2002 Quintessence Publishing Co., Inc. 340-380
37. S. Bouillaguet, A. Schutt, P. Alander, P. Schwaller, G. Buerki, J. Michler, M. Cattani-Lorente, P.K. Vallittu, and I. Krejci Hydrothermal and mechanical stresses degrade fiber-matrix interfacial bond strength in dental fiber-reinforced composites J Biomed Mater Res B Appl Biomater 76 2006 98 105 (Pubitemid 43065477)
38. W. Hellerich, G. Harsch, and S. Haenle Biegeversuch DIN 53452, Werkstoffführer Kunststoffe - Eigenschaften, Prüfungen Kennwerte 6th ed. 1992 Munch Carl Hanser 197-210
39. M. Jauss Biegekennwerte endlosfaserverstärkter ThermoplasteBiegekennwerte an thermoplastischen Faserverbundwerkstoffen ermitteln - Ein Normenvergleich Materialprüfung 39 1997 344 347 (Pubitemid 127629521)
40. K.J. Anusavice Phillips' science of dental materials 11th ed. 2003 Elsevier St. Louis 88-89
41. R.H. Mullarky Aramid fiber reinforcement of acrylic appliances J Clin Orthod 19 1985 655 658
42. I.E. Ruyter, K. Ekstrand, and N. Bjork Developement of carbon/graphite fiber reinforced poly (methyl methacrylate) suitable for implant-fixed dental bridges Dent Mater 2 1986 6 9
43. N. Yazdanie, and M. Mahood Carbon fiber acrylic resin composite: an investigation of transverse strength J Prosthet Dent 54 1985 543 547
44. M. Behr, M. Rosentritt, R. Lang, and G. Handel Flexural properties of fiber reinforced composite using a vacuum/pressure or a manual adaptation manufacturing process J Dent 28 2000 509 514
45. L.V. Lassila, T. Nohrström, and P.K. Vallittu The influence of short-term water storage on the flexural properties of unidirectional glass fiber-reinforced composites Biomaterials 23 2002 2221 2229 (Pubitemid 34226582)
46. J. Chai, Y. Takahashi, K. Hisama, and H. Shimizu Effect of water storage on the flexural properties of three glass fiber-reinforced composites Int J Prosthodont 18 2005 28 33 (Pubitemid 40203330)
47. P.K. Vallittu, I.E. Ruyter, and K. Ekstrand Effect of water storage on the flexural properties of E-glass and silica fiber acrylic resin composite Int J Prosthodont 11 1998 340 350 (Pubitemid 128505819)
48. J. Tanner, P.K. Vallittu, and E. Soderling Effect of water storage of E-glass fiber-reinforced composite on adhesion of Streptococcus mutans Biomaterials 22 2001 1613 1618 (Pubitemid 32551911)
49. C.G. Pantago, L.A. Carman, and S. Warner Glass fiber surface effects in silane coupling K.L. Mittal, Silanes and other coupling agents 1992 VSP Utrecht 229 240