Oxy-fuel burners

Industrial Burners: Handbook

Volumn , Issue , 2003, Pages 693-723

  Kobayashi, Hisashi ^a   Tsiava, Rémi ^b  

^a PRAXAIR INC   (United States)

^b AIR LIQUIDE   (France)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 79952266942     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/9780203488805     Document Type: Chapter

References (36)

1. H. Kobayashi, Oxygen Enriched Combustion System Performance Study, Vol. I: Technical and Economic Analysis, Prepared for the U.S. Dept. of Energy, Idaho Operations Office, Idaho Falls, ID, Report No. DOE/ID/12597, March 1987.
2. Kobayashi, H., Oxygen Enriched Combustion System Performance Study, Phase I Final Report Volume II: Market Assessment, U.S. Dept. of Energy, Report No. DOE/ID/12597–1, September 1988.
3. Duboudin T. et al., The advantages of pure oxygen in high temperature processes, Proceeding IFRF ToTeM8 loughborough, November 1993.
4. Dugué J. et al., Comparison between high air preheat and pure oxygen combustion in pilot scale and industrial furnaces, IFRF ToTeM13, April 1999, Akersloot.
5. Baukal, C.E., Ed., Oxygen-Enhanced Combustion, CRC Press, Boca Raton, FL, 1998.
6. Snyder, W.J., Burner Fulfills Performance Promise in Service, Glass Industry, July 1999, pp. 23–24.
7. Van des Hout, J.J. and Duboudin T., Oxy-fuel furnace L4 after 2.5 years of operation, Procceding: Glastec, Dusseldorf, October 1998.
8. Mathur, P.C., Fundamentals and operating results of Praxair CoJet technology, Iron and Steelmaker, March 1999, 59–64.
9. Grant, M.G., Principles and strategy of EAF post-combustion, 58th Electric Furnace Conference, November 2000, Orlando, FL.
10. Farrell, L.M., Pavlack, T.T., and Rich, L., Operational and Environmental Benefits of Oxy-Fuel Combustion in the Steel Industry, 12th Process Technology Conference Proceedings, Iron and Steel Society, 1993.
11. Stewart, D.L. Jr., Aluminum Melting Technology — Current Trends and Future Opportunities, The 131st TMS Annual Meeting, Seattle, WA, February 18–20, 2002.
12. Ho, M. and Ding, M.G., The Use of Oxygen in Hazardous Waste Incineration — A State of the Art Review, HMCRI’s 9th National Conference and Exhibition SUPERFUND’88, Washington, D.C., November 28–30, 1988.
13. Baudoin, P. et al., The use of pure oxygen in incineration processes, laboratory and pilot scale experiments, modeling and industrial applications, Proceeding Incineration Conference, 1994, Houston.
14. Ammouri, F. et al., A comparison between weighted sum of gray gases and spectral CK radiation models for heat transfer calculations in furnaces, Société Française des Thermiciens, Journée d’études du 14 février 1996.
15. Samaniego, J.-M. et al., Mechanism of nitric oxide formation in oxygen-natural gas combustion, 27th Symp. (Int.) on Combustion, 1998.
16. Labégorre, B. et al., NOx formation modelling in oxygen-natural gas industrial flames, AFRC/JFRC Int. Symp., 1998, Hawaï.
17. U.S. Patent 5,267, 850, Fuel Jet Burner, December 7, 1993.
18. U.S. Patent 5,620,316, Working Hole for Oxyburner, April 15, 1997.
19. Delabroy, O., Performance enhancement of reheating furnaces with oxygen combustion, Mettalurgy Int. Meeting, Luxembourg, October 1998.
20. Delabroy O. et al., Experimental characterization of industrial spray injectors in oxy-combustion, ILASS Europe, 1998.
21. Leroux B., Ph.D. thesis, Etude Expérimentale des Flammes Oxygène. Fuel Liquide, Laboratoire d’Énergétique Moléculaire et Marcroscopique, Ecole Centrale Paris, France, 2002.
22. U.S. Patent 6,135,366, Injector of Fuel in the Form of a Mist for an Oil Burner, October 24, 2000.
23. U.S. Patent 5,833,447, Combustion Process and Apparatus Containing Separated Injections of Fuel, November 10, 1998.
24. Legiret, T., Advanced oxygen burner for glass industry, Glass Sci. Tech., 1997.
25. U.S. Patent 4,378,205, Oxygen Aspirator Burner and Process for Firing a Furnace, March 29, 1983.
26. Kwan, Y. et al., Oxygen Enriched Combustion System Performance Study, Phase I: Final Report Volume III: Burner Tests and Combustion Modeling, prepared for the U.S. Dept. of Energy, September 1988.
27. U.S. Patent 5,076,779, Segregated Zoning Combustion, December 31, 1991.
28. U.S. Patent 6,196,831, Combustion Process for Burning Fuel, March 6, 2001.
29. 2/fuel flame as a new technique for low NOx emission, Comb. Sci. Tech., 1993, Vol. 93.
30. CGA pamphlet P-14, Accidental Prevention in Oxygen-Rich and Oxygen-Deficient Atmospheres, Compressed Gas Association, Arlington, VA, 1992.
31. CGA G-4, Oxygen, Compressed Gas Association, Arlington, VA, 1996.
32. CGA G-4.1, Cleaning Equipment for Oxygen Services, Compressed Gas Association, Arlington, VA, 1996.
33. CGA G-4.3, Commodity Specification for Oxygen, Compressed Gas Association, Arlington, VA, 1994.
34. CGA G-4.4, Industrial Practices for Gaseous Oxygen Transmission and Distribution Piping System, Compressed Gas Association, Arlington, VA, 1993.
35. CGA O2-DIR, Directory of Cleaning Agents for Oxygen Service, Compressed Gas Association, Arlington, VA, 1997.
36. NFPA 86, Ovens and Furnaces, National Fire Protection Agency, Quincy, MA, 1995.