Review of conventional power system stabilizer design methods

2006 IEEE GCC Conference, GCC 2006

Volumn , Issue , 2006, Pages

  Ba Muqabel, Ahmed A ^a   Abido, Mohammad A ^a  

^a KING FAHD UNIVERSITY OF PETROLEUM AND MINERALS   (Saudi Arabia)

Author keywords

Damping; Dynamic; Low frequency oscillations; Power system stabilizer (PSS); Stability

Indexed keywords

CONTROL AND OPTIMIZATION; CONVENTIONAL POWER SYSTEM STABILIZERS; DESIGN METHOD; DESIGN PROBLEMS; DYNAMIC STABILITY; EXCITATION CONTROLS; LOW FREQUENCY OSCILLATIONS; MODERN CONTROL THEORY; POWER SYSTEM STABILIZER (PSS);

DAMPING; DESIGN; STANDBY POWER SYSTEMS; SYSTEM STABILITY;

CONTROL SYSTEM STABILITY;

EID: 79851485317     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/IEEEGCC.2006.5686203     Document Type: Conference Paper

References (103)

1. E. V. Larsen, and D. A. Swann, "Applying power system stabilizers, parts I, II & III," IEEE Trans. Power App. & Sys., vol. PAS-100, no. 6, pp. 3025-3046, June 1981.
2. J. J. Dai, and A. A. Ghandakly, "A Decentralized adaptive control algorithm and the application in power system stabilizer (PSS) design," IEEE, pp.1641-1648, 1995.
3. M. A. Abido, and Y. L. Abdel-Magid, "Optimal design of power system stabilizers using evolutionary programming," IEEE Trans. Energy Con, vol. 17, no. 4, pp. 429-436, December 2002.
4. K. E. Bollinger, and S. Z. Ao, "PSS performance as affected by its output limiter," IEEE Trans. Energy Con., vol. 11, no. 1, pp. 118-124, March 1996.
5. H. A. Toliyat, and et al., "Design of augmented fuzzy logic power system stabilizers to enhance power systems stability," IEEE Trans. Energy Con., vol. 11, no. 1, pp. 97-103, March 1996.
6. K. C. Lee, "Analysis of power system stabilizers application for controlling poorly damped oscillations in the ALCAN/B.C. Hydro power systems," IEEE Trans. Power Sys., vol. 8, no. 1, pp. 255-263, February 1993.
7. M. A. Reza, and M. A. Choudhry, "Design of a robust power system stabilizer over a wide range of load charactristics," IEEE, pp.8-13, 1990.
8. C. M. Lim and et al., "Design of stabilizers in multimachine power systems," IEEE Proc., vol. 132, Pt. C, no. 3, pp. 146-153, May 1985.
9. A. Feliach and X. Yang, "Identification of power system stabilizers locations," IEEE Proc of 28th conf on Dec. & control, pp. 1831-1835, December 1989.
10. J. Lu and et al., "Identification of optimum sites for power system stabilizer applications," IEEE Trans. Power Sys., vol. 5, no. 4, pp. 1302-1308, Nov. 1990.
11. R. J. Fleming and et al., "Selection of parameters of stabilizers in multimachine power systems," IEEE Trans. Power App. & sys., vol. PAS-100, no. 5, pp. 2329-2333, May 1981.
12. L. Kiss, and J. Zerenyi, "A new conception for constructing and tuning power system stabilizers," 2003 IEEE Bologna power Tech Conf, June 23-26, Bologna.
13. P. Kundur & et al., "Application of power system stabilizers for enhancement of overall system stability," IEEE Trans. Pr Sys.,vol. 4, no. 2, pp. 614-626,May 1990.
14. K. E. Bollinger, and et al., "Accelerating power versus electrical power as input signals to power system stabilizers," IEEE Trans. Energy Con., vol. 6, no. 4, pp. 620-626, December 1991.
15. G. J. Rogers, "The application of power system stabilizers to a multigenerator plant," IEEE Trans. Power Sys., vol. 15, no. 1, pp. 350-355, February 2000.
16. J. J. Sanchez-Gasca, and et al., "Multivariable control for damping interarea oscillations in power systems," 1989 IEEE Control Sys. magazine, pp. 28-32, January 1989.
17. A. Fretwell, and et al., "Design, installation and operation of power system stabilizers on the Hongkong electric power system," IEEE Int. Conf. on Adv. in pr. sys control, operation. & management, pp. 534-541, Nov.1991.
18. A. Murdoch, and et al., "Practical application considerations for power system stabilizer controls," 1999 IEEE PES SM, pp. 83-87, 1999.
19. H. Othman, and et al., "On the design of robust power system stabilizers," IEEE Proc of 28th conf on Dec. & control, pp. 1853-1857, December 1989.
20. Y. Yu, and Q. Li, "Pole-placement power system stabilizers design of an unstable nine-machine system," IEEE Trans. Pr Sys., vol. 5, no. 2, pp.353-358, May 1990.
21. C. Wu, and Y. Hsu, "Design of self-tuning PID PSS for multi-machine power systems," IEEE Trans. Power Sys., vol. 3, no. 3, pp. 1059-1064, August 1988.
22. M. K. El-Sherbiny, and et al., "Optimal pole shifting for power system stabilization," EPSR 66 (2003) 253-258.
23. M. Nambu, and Y. Ohsawa, "Development of an advanced power system stabilizer using a strict linearization approach," IEEE Trans. Power Sys., vol. 11, no. 2, pp. 813-818, May 1996.
24. G. Radman, "Design of PSS based on LQG/LTR formulations," IEEE, pp. 1787-1792, 1992.
25. th Sep, Porto, Portugal.
26. G. E. Boukarim, & et al., "A comparison of classical, robust, & Decentralized control designs for multiple PSSs," IEEE Pr Sys,vol.15,no.4,pp.1287-1292,Nov 2000.
27. V. M. Paina, and et al., "Optimal output feedback control of power systems with high-speed excitation systems," IEEE Power App. & Sys., vol. PAS-95, no. 2, pp. 677-686, March/April 1976.
28. P. S. Rao, and I. Sen, "Robust tuning of power system stabilizers using QFT," IEEE Trans.Cont. Sys. Tech., vol. 7, no. 4, pp. 478-486, July 1999.
29. A. K. Sedigh, & G. Alizadeh, "Design of robust PSS using quantitive feedback theory," IEE contl Conf., pub. no.389, pp. 416-421, March 1994.
30. A. F. Okou, & et al., "Towards a systematic procedure to design robust PSSs," IEEE, pp. 2361-2366, 2000.
31. J. M. Ramirez, & I. Castillo, "PSS & FDS simultaneous tuning," EPSR 68 (2004) 33-40.
32. C. T. Tse, & et al., "Robust PSS design by probabilistic eigenvalue sensitivity analysis," EPSR 59 (2001) 47-54.
33. E. Z. Zhout, and et al., "Theory and method for selection of power system stabilizer location," IEEE Trans. Energy Con., vol. 6, no. 1, pp. 170-176, March 1991.
34. S. S. Sharif, "Nonlinear PSS design technique," IEEE, pp. 44-47, 1995.
35. C. M. Falkner, and B. S. Heck, "Accelerating power versus electrical power as input signals to power system stabilizers," IEEE Proc. Amer. Contl. Conf. Washington, pp. 1550-1555, June 1995.
36. M. Gibbard, & D. Vowles, "Design of PSSs for a multigenerator power station,"IEEE,pp.1167-1171, 2000.
37. A. Feliachi, & et al., "PSSs design using optimal reduced order models part II: design," IEEE Trans. Power Sys., vol. 3, no. 4, pp. 1676-1684, November 1988.
38. 2 optimal adaptive PSS," IEEE Trans. Energy Con., vol. 17, no. 1, pp. 143-194, March 2002.
39. W. Gu, "System damping improvement using adaptive PSS," IEEE Proc of Canadian conf on Elec. & computer engineering, Edmonton, Canada,pp.1245-1247,May 1999
40. nd Int. Conf. on Advances in power system control, operation & management, pp. 285-289, December 1993, Hong Kong.
41. J. Ritonja, & et al., "Design of an adaptive PSS," IEEE, ISIE'99-Bled, Slovenia, pp. 1306-1311, 1999.
42. A. Eichmann, & et al., "A prototype self-tuning adaptive PSS for damping of active power swings," IEEE, pp. 122-126, 2000.
43. S. Deghdy, & et al., "Design of a PSS based on selftuning regulator," IEEE, pp. 1046-1049, 1994.
44. A. M. Sharaf, & et al., "A global deviation based PSS," IEEE Proc of Canadian conf on Elec. & computer engineering, Edmonton, Canada,pp.1289-1292,May 1999
45. A. M. Sharaf, & et al., "A self adjusting PSS," IEEE Proc of Canadian conf on Elec. & computer engineering, Edmonton, Canada,pp.1298-1303,May 1999
46. T. Abdelazim, & O. P. Malik, "An adaptive PSS using on-line self-learning fuzzy systems," IEEE, pp. 1715-1720, 2003.
47. J. Lu, & et al., "A fuzzy logic-based adaptive PSS for multi-machine systems," EPSR 60 (2001) 115-121. (Pubitemid 34086471)
48. J. Lu, & et al., "A fuzzy logic-based adaptive PSS for multi-machine systems," IEEE, pp. 111-115, 2000.
49. A. Sharma, & M. L. Kothari, "Intelligent dual input PSSs for multi-machine system," IEEE, pp. 168-173, 2002.
50. N. Hosseinzadeh, & A. Kalam, "A direct adaptive fuzzy PSS," IEEE Trans. Energy Con., vol. 14, no. 4, pp. 1564-1571, December 1999.
51. W. Liu, & et al., "A heuristic dynamic programming based PSS for a turbogenerator in a single machine power system," IEEE, pp. 270-276, 2003.
52. A. Andreoiu, & K. Bhattacharya, "Lyapunov's method based genetic algorithm for multi-machine PSS tuning," IEEE, pp. 1495-1500, 2002.
53. A. Hasanovic, & A. Feliachi, "Genetic algorithm based inter-area oscillation damping controller design using matlab," IEEE, pp. 1136-1141, 2002.
54. Y. L. Abdel-Magid, & et al., "Power system output feedback stabilizer design via genetic algorithms," IEEE conf. publication no. 446, pp. 56-62, September 1997.
55. M. A. Abido, & Y. L. Abdel-Magid, "Coordinated design of a PSS and an SVC-based controller to enhance power system stability," EPSR 25 (2003) 695-704.
56. Y. L. Abdel-Magid, & M. A. Abido, "Optimal multiobjective design of robust PSSs using genetic algorithms," IEEE Trans. Power Sys., vol. 18, no. 3, pp. 1125-1132, August 2003.
57. M. A. Abido, & Y. L. Abdel-Magid, "Eigenvalue assignments in multimachine power systems using tabu search algorithm," Computer and Electrical engineering 28 (2002) 527-545.
58. M. A. Abido, "Optimal design of PSSs using particle swarm optimization," IEEE Trans. Energy Con., vol. 17, no. 3, pp. 406-413, September 2002.
59. M. A. Abido, "Particle swarm optimization for multimachine PSS design," IEEE, pp. 1346-1351, 2001.
60. M. A. Abido, "Optimal design of PSSs using particle swarm optimization," IEEE Trans. Energy Con., vol. 17, no. 3, pp. 406-413, September 2002.
61. M. A. Abido, "An efficient heuristic optimization technique for robust PSS design," EPSR 58 (2001) 53-62.
62. M. A. Abido, "Simulated annealing based approach to PSS and FACTS based stabilizer tuning," Electrical power and energy systems 22 (2000) 247-258.
63. M. A. Abido, "Robust design of multimachine PSSs using simulated annealing," IEEE Trans. Energy Con., vol. 15, no. 3, pp. 297-304, September 2000.
64. M. A. Abido, "Pole-placement technique for PSS and TCSC-based stabilizer design using simulated annealing," Electrical power and energy systems 22 (2000) 543-554.
65. R. Segal, & et al., "A self-tuning PSS based on artificial neural network," Electrical power and energy systems 26 (2004) 423-430.
66. W. Liu, and et al., "Adaptive neural network based PSS design," IEEE, pp. 2970-2975, 2003.
67. P. Shamsollahi, & O. P. Malik, "Design of a neural adaptive PSS using dynamic back-propagation method," Electrical power and energy systems 22 (2000) 29-34.
68. Y. Park, & et al., "A wide range operation PSS design with neural network using power flow charactristics," IEEE, pp. 294-298, 1996.
69. P. Pugliese, & et al., "Intelligent control of inter-area oscillations in power systems," IEEE, pp. 737-741, 1996.
70. Y. Hsu, & C. Chen, "Tuning of PSSs using an artificial neural network," IEEE Trans. Energy Con., vol. 6, no. 4, pp. 612-619, December 1991.
71. Y. Zhang, & et al., "An artificial neural network based adaptive PSS," IEEE Trans. Energy Con., vol. 8, no. 1, pp. 71-77, March 1993.
72. A. S. Yilmaz, & et al., "An analysis of relative performance of state variables in the design of PSS through neural networks," IEEE, pp. 1052-1056, 1998.
73. M. A. Abido, & Y. L. Abdel-Magid, "Radial basis function network based PSSs for multi-machine power systems," IEEE, pp. 622-626, 1997.
74. R. Segal, & et al., "Radial basis function network adaptive PSS," IEEE Trans. Power Sys., vol. 15, no. 2, pp. 722-727, May 2000.
75. M. L. Kothari, & et al., "Orthogonal least squares learning algorithm based rasial basis function network adaptive PSS," IEEE, pp. 542-547, 1997.
76. J. He, & O. P. Malik, "An adaptive PSS based on recurrent neural networks," IEEE Trans. Energy Con., vol. 12, no. 4, pp. 413-418, December 1997.
77. U. Boonprasert, & et al., "Support vector regression based adaptive PSS," IEEE, pp. 371-374, 2003.
78. T. Hiyama, "Development of fuzzy logic PSS and further studies," IEEE, pp. 545-550, 1999.
79. P. Hoang, & K. Tomsovic, "Design and analysis of an adaptive fuzzy PSS," IEEE Trans. Energy Con., vol. 11, no. 2, pp. 455-461, June 1996.
80. A. Ishigame, & et al., "Design of electric PSS based on fuzzy control theory," IEEE, pp. 973-980, 1992.
81. G. V. Moodley, & et al., "Fuzzy logic PSS in multimachine stability studies," IEEE, pp. 843-848, 1996.
82. Y. Lee, and et al., "Design of single-input fuzzy logic control PSS," IEEE Proc of TENCON'02, pp.1901-1904, 2002
83. T. Hiyama, & et al., "Advanced PID type fuzzy logic PSS," IEEE Trans. Energy Con., vol. 9, no. 3, pp. 514-520, September 1994.
84. S. Chen, & et al., "The PSS design using optimal path estimation method," IEEE, pp. 194-199, 1998.
85. J. Lu, & et al., "A fuzzy logic-based adaptive PSS for multimachine systems," Electric power systems research 60 (2001) 115-121. (Pubitemid 34086471)
86. J. Shi, & et al., "Comparison of fuzzy logic based and rule based PSS," IEEE, pp. 692-697, 1992.
87. T. H. Ortmeyer, & T. Hiyama, "Frequency response characteristics of the fuzzy polar PSS," IEEE, pp. 333-338, 1994.
88. A. M. Sharaf, & et al., "A dW-Pa rule-based PSS design using multi-layer zonal bang-bang control," IEEE, pp. 707-712.
89. M. A. Abido, & Y. L. Abdel-Magid, "Hybridizing rule-based PSSs with genetic algorithms," IEEE Trans. Energy Con., vol. 14, no. 2, pp. 600-607, May 1999.
90. S. Robak, & et al., "Comparison of different control structures for lyapunov-based PSS," IEEE, pp. 229-234, 2001.
91. D. M. Lam, & H. Yee, "A study of frequency responses of generator electrical torques for PSS design," IEEE Trans. Power Sys.., vol. 13, no. 3, pp. 1136-1142, August 1998.
92. M. A. Johnson, & et al., "Prony analysis and power system stability some recent theoretical and applications research," IEEE, pp. 1918-1923, 2000.
93. D. J. Trudnowski, & et al., "An application of prony methods in PSS design for multi-machine systems," IEEE Trans. Power Sys., vol. 6, no. 1, pp. 118-126, February 1991.
94. R. Gupta, & et al., "Design of decentralized PSS for multi-machine power system using periodic output feedback technique," IEEE Int. Conf. on control, automation, robotics and vision, Singapore, pp. 1676-1681, December 2002.
95. C. A. Jacobson, & et al., "Towards a dissipativity framework for PSS design," IEEE Trans. Power Sys., vol. 11, no. 4, pp. 1963-1968, November 1996.
96. H. Ni, & et al., "Power system stability agents using robust wide area control," IEEE Trans. Power Sys., vol. 17, no. 4, pp. 1123-1131, November 2002.
97. N. C. Pahalawaththa, & U. D. Annakkage, "An optimum gain scheduling PSS," IEE Int. Conf. on advances in power system control, operation and management, Hong Kong, pp. 211-216, November 1991.
98. H. Wu, & G. T. Heydt, "Design of delayed input wide area PSS using the gain scheduling method," IEEE, pp. 1704-1709, 2003.
99. I. Kamwa, & et al., "Multi-loop PSSs using wide area synchronous phasor measurements," IEEE Proc of American control conf, Philadelphia, Pennsylvania,pp.2963-2967,June 1998
100. A. J. Urdaneta, & et al., "Tuning of PSSs using optimization techniques," IEEE Trans. Power Sys., vol. 6, no. 1, pp. 127-134, February 1991.
101. M. Fathizadeh, & et al., "Power system stabilizer design for maximum stability margin," IEEE, pp. 168-174.
102. G. P. Chen, & et al., "Optimization technique for the design of a linear optimal PSS," IEEE Trans. Energy Con., vol. 7, no. 3, pp. 453-459, September 1992.
103. H. Shu, & T. Chen, "Robust digital design of PSSs," IEEE Proc of American control conf, Albuquerque, New Mexico, pp.1953-1957, June 1997.