Submicron-scale exclusion via polymerizing an aromatic nylon in molded ceramic monolith for paving interconnected pore channels

Journal of the American Ceramic Society

Volumn 94, Issue 2, 2011, Pages 382-390

  Chen, Xinwei ^a   Hong, Liang ^a,b   Tai, Xiao Hua ^a  

^a NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

^b INSTITUTE OF MATERIALS RESEARCH AND ENGINEERING   (Singapore)

Author keywords

[No Author keywords available]

Indexed keywords

AROMATIC NYLONS; CERAMIC MONOLITH; DILUTE POLYMER SOLUTIONS; FLUID PERMEABILITY; IN-SITU; INITIAL STAGES; INTERCONNECTED PORES; INTERPARTICLE CONTACTS; MATRIX; MECHANICAL STRENGTH; P-PHENYLENE; PORE CHANNELS; PORE FORMERS; PRESSURE-DRIVEN; SHEAR THINNING EFFECT; SPATIAL CONFINEMENT; STRUCTURAL CHARACTERISTICS; SUBMICRON SCALE; TEREPHTHALAMIDES;

AMIDES; AROMATIC COMPOUNDS; CALCINATION; CARBONIZATION; CERAMIC MEMBRANES; MEMBRANE TECHNOLOGY; NANORODS; PRESSURE EFFECTS; SHEAR FLOW; SINTERING;

MECHANICAL PERMEABILITY;

EID: 79751483131     PISSN: 00027820     EISSN: 15512916     Source Type: Journal    
DOI: 10.1111/j.1551-2916.2010.04082.x     Document Type: Article

References (36)

1. M. Arkas, D. Tsiourvas, and, C. M. Paleos, " Organosilicon Dendritic Networks in Porous Ceramics for Water Purification," Chem. Mater., 17 [13] 3439-44 (2005). (Pubitemid 41047937)
2. R. W. Rice, Porosity of Ceramics. Marcel Dekker, New York, 1998, 495pp.
3. P. Colombo, and, M. Scheffler, Cellular Ceramics-Structure, Manufacturing, Properties and Applications. Wiley-VCH, Weinheim, 2005, 401pp.
4. B. Van der Bruggen, C. Vandecasteele, T. Van Gestel, W. Doyen, and, R. Leysen, " A Review of Pressure-Driven Membrane Processes in Wastewater Treatment and Drinking Water Production," Environ. Prog., 22 [1] 46-56 (2003).
5. M. A. Keane, " Ceramics for Catalysis," J. Mater. Sci., 38 [23] 4661-75 (2003).
6. O. K. Varghese, D. W. Gong, M. Paulose, K. G. Ong, C. A. Grimes, and, E. C. Dickey, " Highly Ordered Nanoporous Alumina Films: Effect of Pore Size and Uniformity on Sensing Performance," J. Mater. Res., 17 [5] 1162-71 (2002). (Pubitemid 34648287)
7. L. Besra, and, M. Liu, " A Review on Fundamentals and Applications of Electrophoretic Deposition (EPD)," Prog. Mater. Sci., 52 [1] 1-61 (2007). (Pubitemid 44540314)
8. M. T. Ravanchi, T. Kaghazchi, and, A. Kargari, " Application of Membrane Separation Processes in Petrochemical Industry: A Review," Desalination, 235 [1-3] 199-244 (2009).
9. E. Chevalier, D. Chulia, C. Pouget, and, M. Viana, " Fabrication of Porous Substrates: A Review of Processes Using Pore Forming Agents in the Biomaterial Field," J. Pharm. Sci., 97 [3] 1135-54 (2008).
10. E. A. Olevsky, " Theory of Sintering: From Discrete to Continuum," Mater. Sci. Eng. R-Rep., 23 [2] 41-100 (1998). (Pubitemid 128433698)
11. S. W. Sofie, " Fabrication of Functionally Graded and Aligned Porosity in Thin Ceramic Substrates With the Novel Freeze-Tape-Casting Process," J. Am. Ceram. Soc., 90 [7] 2024-31 (2007). (Pubitemid 47146911)
12. T. Moritz, and, H.-J. Richter, " Ice-Mould Freeze Casting of Porous Ceramic Components," J. Eur. Ceram. Soc., 27 [16] 4595-601 (2007). (Pubitemid 47488033)
13. A. Kritikaki, and, A. Tsetsekou, " Fabrication of Porous Alumina Ceramics from Powder Mixtures with Sol-gel Derived Nanometer Alumina: Effect of Mixing Method," J. Eur. Ceram. Soc., 29 [9] 1603-11 (2009).
14. M. Takahashi, R. L. Menchavez, M. Fuji, and, H. Takegami, " Opportunities of Porous Ceramics Fabricated by Gelcasting in Mitigating Environmental Issues," J. Eur. Ceram. Soc., 29 [5] 823-8 (2008).
15. P. Sepulveda, " Gelcasting Foams for Porous Ceramics," Am. Ceram. Soc. Bull., 76 [10] 61-5 (1997).
16. K. Prabhakaran, A. Melkeri, M. O. Beigh, N. M. Gokhale, and, S. C. Sharma, " Preparation of a Porous Cermet SOFC Anode Substrate by Gelcasting of NiO-YSZ Powders," J. Am. Ceram. Soc., 90 [2] 622-5 (2007). (Pubitemid 46160517)
17. E. A. Moreira, M. D. M. Innocentini, and, J. R. Coury, " Permeability of Ceramic Foams to Compressible and Incompressible Flow," J. Eur. Ceram. Soc., 24 [10-11] 3209-18 (2004). (Pubitemid 38531764)
18. E. Gregorová, Z. Åivcová, and, W. Pabst, " Porosity and Pore Space Characteristics of Starch-Processed Porous Ceramics," J. Mater. Sci., 41 [18] 6119-22 (2006). (Pubitemid 44389306)
19. O. Lyckfeldt, and, J. M. F. Ferreira, " Processing of Porous Ceramics by "Starch Consolidation"," J. Eur. Ceram. Soc., 18 [2] 131-40 (1998). (Pubitemid 128406281)
20. Z. Zivcova, E. Gregorova, W. Pabst, and, D. S. Smith, " Thermal Conductivity of Porous Alumina Ceramics Prepared Using Starch as a Pore-Forming Agent," J. Eur. Ceram. Soc., 29 [3] 347-53 (2009).
21. F. Higashi, and, W. X. Zhang, " Random Copolyamides of Terephthalic Acid, p-Phenylenediamine and p-Aminobenzoic Acid Soluble in N-methylpyrrolidone/ CaCl2," Macromol. Rapid Commun., 21 [15] 1044-5 (2000).
22. P. J. Burchill, " Chemical Characterization of Kevlar-49," J. Mater. Sci., 13 [10] 2275-6 (1978).
23. C. Lõez-Gándara, F. M. Ramos, and, A. Cirera, " YSZ-Based Oxygen Sensors and the Use of Nanomaterials: A Review from Classical Models to Current Trends," J. Sensors, 2009, doi: DOI: 10.1155/2009/258489 (2009).
24. R. J. Gorte, and, J. M. Vohs, " Nanostructured Anodes for Solid Oxide Fuel Cells," Curr. Opin. Colloid Interface Sci., 14 [4] 236-44 (2009).
25. X. W. Chen, and, L. Hong, " An In Situ Approach to Create Porous Ceramic Membrane: Polymerization of Acrylamide in a Confined Environment," J. Am. Ceram. Soc., 93 [1] 96-103 (2010).
26. Y. Wang, M. Rafailovich, J. Sokolov, D. Gersappe, T. Araki, Y. Zou, A. D. L. Kilcoyne, H. Ade, G. Marom, and, A. Lustiger, " Substrate Effect on the Melting Temperature of Thin Polyethylene Films," Phys. Rev. Lett., 96 [2] 028303, 4pp (2006).
27. D. A. Mooney, and, J. M. D. MacElroy, " Theoretical Studies of the Structure and Dynamics of Semicrystalline PPTA Water Vapor Interfaces," Langmuir, 13 [5] 1173-81 (1997). (Pubitemid 127567463)
28. H. Hayashi, T. Saitou, N. Maruyama, H. Inaba, K. Kawamura, and, M. Mori, " Thermal Expansion Coefficient of Yttria Stabilized Zirconia for Various Yttria Contents," Solid State Ionics, 176 [5-6] 613-9 (2005). (Pubitemid 40049452)
29. W. D. Kingery, H. K. Bowen, and, D. R. Uhlmann, Introduction to Ceramics, 2nd edition, John Wiley & Sons Inc. New York, 1976.
30. I. R. Gibson, G. P. Dransfield, and, J. T. S. Irvine, " Sinterability of Commercial 8 mol% Yttria-Stabilized Zirconia Powders and the Effect of Sintered Density on the Ionic Conductivity," J. Mater. Sci., 33 [17] 4297-305 (1998). (Pubitemid 128509760)
31. E. Ryshkewitch, " Compression Strength of Porous Sintered Alumina and Zirconia," J. Am. Ceram. Soc., 36 [2] 65-8 (1953).
32. C. Clasen, J. P. Plog, W. M. Kulicke, M. Owens, C. Macosko, L. E. Scriven, M. Verani, and, G. H. McKinley, " How Dilute are Dilute Solutions in Extensional Flows," J. Rheol., 50 [6] 849-81 (2006). (Pubitemid 44724862)
33. M. Nasir, H. Matsumoto, M. Minagawa, A. Tanioka, T. Danno, and, H. Horibe, " Preparation of PVDF/PMMA Blend Nanofibers by Electrospray Deposition: Effects of Blending Ratio and Humidity," Polym. J., 41 [5] 402-6 (2009).
34. E. Freire, O. Bianchi, E. E. C. Monteiro, R. C. R. Nunes, and, M. C. Forte, " Processability of PVDF/PMMA Blends Studied by Torque Rheometry," Mater. Sci. Eng. C-Biomimetic Supramol. Syst., 29 [2] 657-61 (2009).
35. I. Nicotera, L. Coppola, C. Oliviero, M. Castriota, and, E. Cazzanelli, " Investigation of Ionic Conduction and Mechanical Properties of PMMA-PVdF Blend-Based Polymer Electrolytes," Solid State Ionics, 177 [5-6] 581-8 (2006). (Pubitemid 43243510)
36. N. P. Chen, and, L. Hong, " Surface Phase Morphology and Composition of the Casting Films of PVDF-PVP Blend," Polymer, 43 [4] 1429-36 (2002). (Pubitemid 33140092)