Fast and highly efficient one-pot synthesis of polyoxadiazole/carbon nanotube nanocomposites in mild acid

Polymer International

Volumn 60, Issue 3, 2011, Pages 517-528

  Loos, Marcio R ^a   Abetz, Volker ^a   Schulte, Karl ^b  

^a INSTITUTE OF MATERIALS RESEARCH   (Germany)

^b HAMBURG UNIVERSITY OF TECHNOLOGY   (Germany)

Author keywords

Carbon nanotubes; High performance polymers; In situ polymerization; Mechanical properties; Nanocomposites; Polyoxadiazoles

Indexed keywords

CONDENSING AGENTS; DICARBOXYLIC ACID; DIPHENYL ETHER; HIGH MOLECULAR WEIGHT; HIGH-PERFORMANCE POLYMERS; HYDRAZINE SULFATE; IN SITU POLYMERIZATION; LOAD TRANSFER; MATRIX; MILD ACID; ONE-POT SYNTHESIS; OXADIAZOLES; POLAR APROTIC SOLVENT; POLY (PHOSPHORIC ACID); POLYOXADIAZOLES; REINFORCEMENT EFFECTS; SOLUTION POLYCONDENSATION; STORAGE MODULI; SYNTHESIS METHOD; THERMALLY STABLE;

MECHANICAL PROPERTIES; NANOCOMPOSITES; PHOSPHORIC ACID; POLYCONDENSATION; POLYMERS; TENSILE STRENGTH; TRANSFER MATRIX METHOD;

MULTIWALLED CARBON NANOTUBES (MWCN);

EID: 79751481237     PISSN: 09598103     EISSN: 10970126     Source Type: Journal    
DOI: 10.1002/pi.2983     Document Type: Review

References (35)

1. Pizzutto CE, Suave J, Betholdi J, Pezzin SH, Coelho LAF and Amico SC, J Reinf Plast Compos 29: 524-530 (2010).
2. Loos MR, Pezzin SH, Coelho LAF and Amico SC, Mater Res Iberoam J 11: 347-352 (2008).
3. Loos MR, Pezzin SH, Amico SC, Bergmann CP and Coelho LAF, J Mater Sci 43: 6064-6069 (2008).
4. Jia Z, Wang Z, Liang J, Wei B and Wu D, Carbon 37: 903-906 (1999).
5. Kumar S, Dang TD, Arnold FE, Bhattacharyya AR, Min BG, Zhang X, et al, Macromolecules 35: 9039-9043 (2002).
6. Li X, Huang Y and Li J, Iran Polym J 15: 317-322 (2006).
7. Eo SM, Oh SJ, Tan LS and Baek JB, Eur Polym J 44: 1603-1612 (2008).
8. Zhou C, Wang S, Zhang Y, Zhuang Q and Han Z, Polymer 49: 2520-2530 (2008).
9. Baek JB, Lyons CB and Tan LS, J Mater Chem 14: 2052-2056 (2004).
10. Baek JB, Lyons CB and Tan LS, Macromolecules 37: 8278-8285 (2004).
11. Lee HJ, Oh SJ, Choi JY, Kim JW, Han J, Tan LS, et al, Chem Mater 17: 5057-5064 (2005).
12. Oh SJ, Lee HJ, Keum DK, Lee SW, Wang DH, Park SY, et al, Polymer 47: 1132-1140 (2006).
13. Choi JY, Oh SJ, Lee HJ, Wang DH, Tan LS and Baek JB, Macromolecules 40: 4474-4480 (2007).
14. Choi JY, Han SW, Huh WS, Tan LS and Baek JB, Polymer 48: 4034-4037 (2005).
15. Wang DH, Mirau P, Li B, Li CY, Baek JB and Tan LS, Chem Mater 20: 1502-1515 (2008).
16. Tan LS, Jeon IY and Baek JB, J Polym Sci A: Polym Chem 46: 3471-3481 (2008).
17. Kang SW, Tan LS, Baek JB, Jeong JY and Lee HJ, J Polym Sci A: Polym Chem 46: 6041-6050 (2008).
18. Saeed K, Park SY, Haider S and Baek JB, Nanoscale Res Lett 4: 39-46 (2009).
19. Loos MR, Schulte K and Abetz V. Polyazole based nanocomposites composition and method for preparing the same. Patent registered on: Europe 09004111.2.
20. Gomes D, Roeder J, Ponce ML and Nunes SP, J Power Sources 175: 49-59 (2008).
21. Loos MR and Gomes D, High Perform Polym 21: 697-708 (2009).
22. Thostenson ET and Chou TW, J Phys D 36: 573-582 (2003).
23. Siemann U, Prog Colloid Polym Sci 130: 1-14 (2005).
24. Saeed K and Park SY, J Appl Polym Sci 106: 3729-3735 (2007).
25. Wu TM and Lin SH, J Polym Sci B: Polym Phys 44: 1413-1418 (2006).
26. Showkat AM, Lee KP, Gopalan AI, Kim SH, Choi SH and Sohn SH, J Appl Polym Sci 101: 3721-3729 (2006).
27. Gomes D, Loos MR, Wichmann MHG, de la Vega A and Schulte K, Compos Sci Technol 69: 220-227 (2009).
28. Schulz B, Bruma M and Brehmer L, Adv Mater 9: 601-613 (1997).
29. Toshio O, Yuichi I and Takashi I, Adv Compos Mater 13: 215-226 (2004).
30. Chou WJ, Wang CC and Chen CY, Compos Sci Technol 68: 2208-2213 (2008).
31. Cho DH, Lee SY, Yang GG, Fukushima H and Drzal LT, Macromol Mater Eng 209: 179-187 (2005).
32. Hsueh HB and Chen CY, Polymer 44: 1151-1161 (2003).
33. Muhammad K, Shaukat S and Zahoor A, J Macromol Sci A 44: 55-63 (2007).
34. Standard test method for tensile properties of thin plastic sheeting, ASTM D882-09.
35. Frazer AH and Reed TA, J Polym Sci C 19: 89 (1967).