Vibration of spinning discs and powder formation in centrifugal atomization

Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences

Volumn 467, Issue 2126, 2011, Pages 361-380

  Deng, Huaxia ^a   Ouyang, Huajiang ^a  

^a UNIVERSITY OF LIVERPOOL   (United Kingdom)

Author keywords

Centrifugal atomization; Film disintegration; Spinning discs; Vibration

Indexed keywords

ATOMIZATION; CENTRIFUGATION; LIQUID FILMS;

ATOMIZING DISCS; BREAK-UP; CENTRIFUGAL ATOMIZATION; CONTROL PARAMETERS; EFFICIENT PROCESS; INDUSTRIAL PROCESSS; KIRCHHOFF PLATES; METALLIC MELTS; MOVING LOAD; POWDER FORMATION; POWDER PRODUCTION; POWDER SIZE; SPINNING DISCS; SPRAY DEPOSITION; VIBRATION;

VIBRATION ANALYSIS;

EID: 79551663988     PISSN: 13645021     EISSN: 14712946     Source Type: Journal    
DOI: 10.1098/rspa.2010.0099     Document Type: Conference Paper

References (34)

1. Angers, R., Tremblay, R. & Dube, D. 1997 Formation of irregular particles during centrifugal atomization of AZ91 alloy. Mater. Lett. 33, 13-18. (doi:10.1016/S0167-577X(97)00072-4) (Pubitemid 127428543)
2. Champagne, B. & Angers, R. 1984 Rep atomization mechanisms. Powder Metall. Int. 16, 125-128.
3. Dombrowski, N. & Hooper, P. C. 1962 The effect of ambient density on drop formation in sprays. Chem. Eng. Sci. 17, 291-305. (doi:10.1016/0009- 2509(62)85008-8)
4. Dombrowski, N. & Johns, W. R. 1963 The aerodynamic instability and disintegration of viscous liquid sheets. Chem. Eng. Sci. 18, 203-214. (doi:10.1016/0009-2509(63)85005-8)
5. Emslie, A. G., Bonner, F. T. & Peck, L. G. 1958 Flow of a viscous liquid on a rotating disk. J. Appl. Phys. 29, 858-862. (doi:10.1063/1.1723300)
6. Fraser, R. P., Dombrowski, N. & Routley, J. H. 1963 The filming of liquids by spinning cups. Chem. Eng. Sci. 18, 323-337. (doi:10.1016/0009- 2509(63)80026-3)
7. Iwan, W. D. & Moeller, T. L. 1976 The stability of a spinning elastic disk with a transverse load system. J. Appl. Mech.-T. ASME 43, 485-490.
8. Kirpekar, S. & Bogy, D. B. 2008 Computing the aeroelastic disk vibrations in a hard disk drive. J. Fluids Struct. 24, 75-95. (doi:10.1016/j.jfluidstructs.2007.07.005) (Pubitemid 351194268)
9. Labrecque, C., Angers, R., Tremblay R. & Dube, D. 1997 Inverted disk centrifugal atomization of AZ91 magnesium alloy. Can. Metall. Quart. 36, 169-175. (doi:10.1016/S00084433(97)00007-4)
10. Lamb, H. & Southwell, R. V. 1921 The vibrations of a spinning disk. Proc. R. Soc. Lond. A 99, 272-280. (doi:10.1098/rspa.1921.0041)
11. Lawley, A. 1992 Atomization: the production of metal powders. Princeton, NJ: Metal Powder Industries Federation.
12. Li, H. P. & Tsakiropoulos, P. 2001 Centrifugal atomisation of alloys. Key Eng. Mater. 189/191, 245-251. (doi:10.4028/www.scientific.net/KEM.189-191. 245)
13. Liu, H. M. 1999 Science and engineering of droplets: fundamentals and applications. Parkridge, NJ: Noyes Publications/William Andrew Publishing.
14. Liu, Y. Z. & Li, Y. Y. 2007 A new general equation of mean particle size for different atomization processes. Mater. Sci. Forum 1-8, 534-536.
15. Malkin, A. 2008 Surface instabilities. Colloid J. 70, 673-689. (doi:10.1134/S1061933X0806001X)
16. Myers, T. G. & Charpin, J. P. F. 2001 The effect of the Coriolis force on axisymmetric rotating thin film flows. Int. J. Nonlin. Mech. 36, 629-635. (doi:10.1016/S0020-7462(00)00026-3) (Pubitemid 32092434)
17. Ouyang, H. 2005 Vibration of an atomising disc subjected to a growing distributed mass. J. Mech. Phys. Solids 53, 1000-1014. (doi:10.1016/j.jmps.2005. 01.001) (Pubitemid 40303109)
18. Ouyang, H. 2007 Stationary and non-stationary vibration of atomising discs. J. Sound Vibr. 308, 699-708. (doi:10.1016/j.jsv.2007.03.069) (Pubitemid 47483766)
19. Ouyang, H. & Mottershead, J. 2001 Optimal suppression of parametric vibration in discs under rotating frictional loads. Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci. 215, 65-75. (doi:10.1243/0954406011520526)
20. Ozturk, S. & Arslan, F. 2001 Production of rapidly solidified metal powders by water cooled rotating disc atomisation. Powder Metall. 44, 171-176. (doi:10.1179/003258901666220)
21. Peurrung, L. M. & Graves, D. B. 1991 Film thickness profiles over topography in spin coating. J. Electrochem. Soc. 138, 2115-2124. (doi:10.1149/1.2085935)
22. Senecal, P. K., Schmidt, D. P., Nouar, I., Rutland, C. J., Reitz, R. D. & Corradini, M. L. 1999 Modeling high-speed viscous liquid sheet atomization. Int. J. Multiphase Flow 25, 1073-1097. (doi:10.1016/S0301-9322(99) 00057-9) (Pubitemid 30049567)
23. Singer, A. R. E. & Kisakurek, S. E. 1976 Centrifugal spray deposition of aluminium strip. Metals Technol. 3, 565-570.
24. Sisoev, G. M., Matar, O. K. & Lawrence, C. J. 2003 Axisymmetric wave regimes in viscous liquid film flow over a spinning disk. J. Fluid Mech. 495, 385-411. (doi:10.1017/S0022112003006360) (Pubitemid 38025070)
25. Strutt, J. W. & Rayleigh, L. 1878 On the instability of jets. Proc. Lond. Math. Soc. 10, 4-13. (doi:10.1112/plms/s1-10.1.4)
26. Taylor, G. I. 1950 The instability of liquid surfaces when accelerated in a direction perpendicular to their planes. Proc. R. Soc. Lond. A 201, 192-196. (doi:10.1098/rspa.1950.0052)
27. Tian, J. F. & Hutton, S. G. 2001 Cutting-induced vibration in circular saws. J. Sound Vibr. 242, 907-922. (doi:10.1006/jsvi.2000.3397) (Pubitemid 32432845)
28. Uma, B. & Usha, R. 2009 A thin conducting liquid film on a spinning disk in the presence of a magnetic field: dynamics and stability. J. Appl. Mech. 76, 041002. (doi:10.1115/1.3086589)
29. Weber, C. 1931 Zum zerfall eines flssigkeitsstrahles. Z. Angew. Math. Mech. 11, 136-154. (doi:10.1002/zamm.19310110207)
30. Xie, J. W., Zhao, Y. Y. & Dunkley, J. J. 2004 Effects of processing conditions on powder particle size and morphology in centrifugal atomisation of tin. Powder Metall. 47, 168-172. (doi:10.1179/003258904225015482)
31. Zhao, Y. Y. 2004a Analysis of flow development in centrifugal atomization: part I. Film thickness of a fully spreading melt. Modell. Simul. Mater. Sci. Eng. 12, 959-971. (doi:10.1088/0965-0393/12/5/013)
32. Zhao, Y. Y. 2004b Analysis of flow development in centrifugal atomization: part II. Disintegration of a non-fully spreading melt. Modell. Simul. Mater. Sci. Eng. 12, 973-983. (doi:10.1088/0965-0393/12/5/014)
33. Zhao, Y. Y. 2006 Considerations in designing a centrifugal atomiser for metal powder production. Mater. Design 27, 745-750. (doi:10.1016/j.matdes.2005. 01.011)
34. Zhao, Y. Y., Jacobs, M. H. & Dowson, A. L. 1998 Liquid flow on a rotating disk prior to centrifugal atomization and spray deposition. Process Metall. Mater. Process. Sci. 29, 1357-1369.