Finite element modeling of structures with L-shaped beams and bolted joints

Journal of Vibration and Acoustics

Volumn 133, Issue 1, 2011, Pages

  He, K ^a   Zhu, W D ^a  

^a Baltimore County   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BOLTED JOINTS; BOLTS; DYNAMIC RESPONSE; NATURAL FREQUENCIES; STIFFNESS; STRUCTURAL FRAMES; THIN WALLED STRUCTURES; UNCERTAINTY ANALYSIS; VIBRATIONS (MECHANICAL);

ASSEMBLED STRUCTURES; BOLTED CONNECTIONS; FINITE ELEMENT MODELLING (FEM); GLOBAL DYNAMICS; L-SHAPED; MODEL UPDATING; MODELING APPROACH; PREDICTIVE MODELS; SHAPED BEAM; UPDATING APPROACHES;

FINITE ELEMENT METHOD;

EID: 79551619186     PISSN: 10489002     EISSN: 15288927     Source Type: Journal    
DOI: 10.1115/1.4001840     Document Type: Article

References (29)

1. He, K., and Zhu, W. D., 2009, "Modeling of Fillets in Thin-Walled Beams Using Shell/Plate and Beam Finite Elements," ASME J. Vibr. Acoust., 131(5), p. 051002.
2. Segalman, D. J., 2003, "Status and Integrated Road-Map for Joints Modeling Research," Sandia National Laboratories, Report No. SAND2003-0897.
3. Dunne, F. P. E., and Heppenstall, M., 1990, "The Effect of Joints on the Transverse Vibration of a Simple Structure," J. Mech. Eng. Sci., 204, pp. 37-42.
4. Folkman, S. L., Rowsell, E. A., and Ferney, G. D., 1995, "Influence of Pinned Joints on Damping and Dynamic Behavior of a Truss," J. Guid. Control Dyn., 18, pp. 1398-1403.
5. Yaghmai, I., and Frohrib, D. A., 1978, "The Effect of Joint Properties on the Vibration of Timoshenko Frames," Shock Vib. Dig., 10, pp. 64-91.
6. Litson, A., and Smalley, A. J., 1989, "Bending Flexibility of Bolted Flanges and Its Effect in Dynamical Behavior of Structures," ASME J. Vib., Acoust., Stress, Reliab. Des., 111, pp. 392-398.
7. Ungar, E. E., 1973, "The Status of Engineering Knowledge Concerning the Damping of Built-Up Structures," J. Sound Vib., 26, pp. 141-154.
8. Shin, Y. S., Iverson, J. C., and Kim, K. S., 1991, "Experimental Studies on Damping Characteristics of Bolted Joints for Plates and Shells," J. Pressure Vessel Technol., 113, pp. 402-408.
9. Vitelleschi, S., and Schmidt, L. C., 1977, "Damping in Friction-Grip Bolted Joints," J. Struct. Div., 103, pp. 1447-1460.
10. Gaul, L., 1985, "Analytical and Experimental Study of the Dynamics of Structures With Joints and Attached Substructures," Tenth ASME Conference on Mechanical Vibration and Noise, Cincinnati, OH.
11. Gaul, L., and Bohlen, S., 1987, "Identification of Nonlinear Structural Joint Models and Implementation in Discretized Structure Models," Proceedings of the 11th ASME Conference on Mechanical Vibration and Noise: The Role of Damping in Vibration and Noise, Boston, pp. 213-219.
12. Hess, D. P., and Basava, S., 1996, "Variation of Clamping Force in a Single- Bolt Assembly Subjected to Axial Vibration," Proceedings of the ASME International Mechanical Engineering Congress and Exposition: Elasto-Impact and Friction in Dynamic Systems, Atlanta, Georgia, ASME, New York, Vol. 90, pp. 97-102.
13. Janicke, L., and Kost, A., 1996, "Error Estimation and Adaptive Mesh Generation in the 2D and 3D Finite Element Method," IEEE Trans. Magn., 32(3), pp. 1334-1337.
14. Segalman, D. J., and Starr, M. J., 2007, "Modeling of Threaded Joints Using Anisotropic Elastic Continua," ASME J. Appl. Mech., 74, pp. 575-585.
15. Iwan, W. D., 1966, "A Distributed-Element Model for Hysteresis and Its Steady-State Dynamic Response," ASME J. Appl. Mech., 33, pp. 893-900.
16. Segalman, D. J., 2005, "A Four-Parameter Iwan Model for Lap-Type Joints," ASME J. Appl. Mech., 72, pp. 752-760.
17. Song, Y., Hartwigsen, C. J., McFarland, D. M., Vakakis, A. F., and Bergman, L. A., 2004, "Simulation of Dynamics of Beam Structures With Bolted Joints Using Adjusted Iwan Beam Elements," J. Sound Vib., 273, pp. 249-276.
18. Quinn, D. D., and Segalman, D. J., 2005, "Using Series-Series Iwan-Type Models for Understanding Joint Dynamics," ASME J. Appl. Mech., 72, pp. 666-673.
19. Yun, S. H., and Bauchau, O. A., 1998, "Improving Modal Parameter Predictions for Jointed Airframe Panels. Part II: Improved Numerical Model," J. Am. Helicopter Soc., 43, pp. 164-171.
20. Ren, Y., and Beards, C. F., 1998, "Identification of 'Effective' Linear Joint Using Coupling and Joint Identification Techniques," ASME J. Vibr. Acoust., 120, pp. 331-338.
21. Yang, T., Fan, S. H., and Lin, C. S., 2003, "Joint Stiffness Identification Using FRF Measurements," Comput. Struct., 81, pp. 2549-2556.
22. Ren, Y., Lim, T. M., and Lim, M. K., 1998, "Identification of Properties of Nonlinear Joints Using Dynamic Test Data," ASME J. Vibr. Acoust., 120, pp. 324-330.
23. Friswell, M. I., and Mottershead, J. E., 1995, Finite Element Model Updating in Structure Dynamics, Kluwer Academic, The Netherlands.
24. Wong, C. N., Zhu, W. D., and Xu, G. Y., 2004, "An Iterative General-Order Perturbation Method for Multiple Structural Damage Detection," J. Sound Vib., 273, pp. 363-386.
25. Ewins, D. J., 2000, Modal Testing: Theory, Practice and Application, 2nd ed., Research Studies, Baldock, Hertfordshire, UK.
26. Groper, M., 1985, "Microslip and Macroslip in Bolted Joints," Exp. Mech., 25, pp. 171-174.
27. Timoshenko, S., 1958, Strength of Materials, Part II: Advance Theory and Problems, 3rd ed., Robert E. Krieger, Princeton, pp. 93-95.
28. Ito, Y., Toyoda, J., and Nagata, S., 1977, "Interface Pressure Distribution in a Bolted-Flange Assembly," ASME Paper No. 77-WA/DE-11.
29. Shigley, J. E., and Mischke, C. R., 1989, Mechanical Engineering Design, 5th ed., McGraw-Hill, New York.