Fluid mechanics of papermaking

Annual Review of Fluid Mechanics

Volumn 43, Issue , 2011, Pages 195-217

  Lundell, Fredrik ^a   Söderberg, L Daniel ^a,b   Alfredsson, P Henrik ^a  

^a ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

^b INNVENTIA AB   (Sweden)

Author keywords

fiber orientation; fiber suspension; jet flow; stability

Indexed keywords

FIBER ORIENTATIONS; FIBER SUSPENSION; JET FLOW; PAPERMAKING PROCESS; WOOD FIBER;

CONTACTS (FLUID MECHANICS); FLUID MECHANICS; MULTIPHASE FLOW; PAPERMAKING; SUSPENSIONS (FLUIDS); WOOD PRODUCTS;

FIBERS;

FLUID MECHANICS; JET FLOW; STABILIZATION; WOOD;

BUNDLES; DISPERSIONS; FIBER ORIENTATION; FLUID MECHANICS; PAPER MAKING; STABILITY; WOOD PRODUCTS;

EID: 79551544061     PISSN: 00664189     EISSN: None     Source Type: Book Series    
DOI: 10.1146/annurev-fluid-122109-160700     Document Type: Article

References (68)

1. Advani S, Tucker C. 1987. The use of tensors to describe and predict fiber orientation in short fiber composites. J. Rheol. 31:751-84
2. Altenbach H, Naumenko K, Pylypenko S, Renner B. 2007. Influence of rotary inertia on the fiber dynamics in homogenous creeping flows. Z. Angew. Math. Mech. 87:81-93
3. Asplund G, Norman B. 2004. Fibre orientation anisotropy profile over the thickness of a headbox jet. J. Pulp Paper Sci. 30:217-21 (Pubitemid 40785097)
4. Audenis G, Dahlkild AA. 2001. Impingement of an inviscid plane liquid jet on a porous wall: a fixed domain method. Nord. Pulp Paper Res. J. 16:274-83 (Pubitemid 34099580)
5. Bennington CPJ, Mmbaga JP. 2001. Liquid phase turbulence in pulp fibre suspensions. In Science of Paper-making, Trans. 12th Fund. Res. Symp., ed. CF Baker, vol. 1, pp. 255-86. London: Mech. Eng. Publ.
6. Carlsson A. 2009. Near wall fibre orientation in flowing suspensions. PhD thesis. Dep. Mech., KTH, Stockholm. 165 pp.
7. Dalpke B, Kerekes RJ, Green SI. 2004. Modelling jet impingement and the initial drainage zone in roll forming. J. Pulp Paper Sci. 30:65-70
8. Ding EJ, Aidun CK. 2000. The dynamics and scaling law for particles suspended in shear flow with inertia. J. Fluid Mech. 423:317-44
9. Folgar F, Tucker CL. 1984. Orientation behavior of fibres in concentrated suspensions. J. Reinf. Plast. Compos. 3:98-119 (Pubitemid 14608955)
10. Green S. 2000. Modeling suction shoes in twin-wire blade forming: results. J. Pulp Paper Sci. 26:53-58 (Pubitemid 30567367)
11. Green SI, Kerekes RJ. 1996. Numerical analysis of pressure pulses induced by blades in gap formers. In TAPPI Eng. Conf., vol. 1, pp. 185-92. Atlanta: TAPPI
12. Hämäläinen J, Mäkinen RAE, Tarvainen P. 2000. Optimal design of paper machine headboxes. Int. J. Numer. Methods Fluids 34:685-700 (Pubitemid 32051247)
13. Hauptmann E, Vyse R, Mardon J. 1990a. The wake effect as applied to modern hydraulic headboxes. I: Introduction and practical illustrations of the wake effect; elementary hydrodynamics. Pulp Paper Canada 91(9):88-97
14. Hauptmann E, Vyse R, Mardon J. 1990b. The wake effect as applied to modern hydraulic headboxes. II: Design and operation of perforated roll headboxes, hydraulic or filled headboxes. Pulp Paper Canada 91(10):47-57
15. Holm R, Söderberg D. 2005. A theoretical analysis of the flow stability in roll forming of paper. Nord. Pulp Paper Res. J. 20:212-16 (Pubitemid 40851076)
16. Holm R, Söderberg D, Norman B. 2005. Experimental studies on dewatering during roll forming of paper. Nord. Pulp Paper Res. J. 20:205-11 (Pubitemid 40851075)
17. Holmqvist C, Dahlkild A. 2006. A flexible approach for modelling flow in multi-component blade formers. Nord. Pulp Paper Res. J. 21:73-81
18. Holmqvist C, Dahlkild A. 2008. Consolidation of sheared, strongly flocculated suspensions. AIChE J. 54:924-39 (Pubitemid 351529942)
19. Holmqvist C, Söderberg D. 2010. Drainage pressure oscillations during roll forming. Proc. PaperCon 2010, Atlanta, PAPERCD-10. Atlanta: TAPPI
20. Hyensjö M, Dahlkild A. 2008. Study of the rotational diffusivity coefficient of fibres in planar contracting flows with varying turbulence levels. Int. J. Multiphase Flow 34:894-903
21. Hyensjö M, Dahlkild A, Krochak P, Olson J, Hämäläinen J. 2007. Modelling the effect of shear flow on fibre orientation anisotropy in a planar contraction. Nord. Pulp Paper Res. J. 22:376-82 (Pubitemid 47524150)
22. James DF, Yogachandran N, Loewen MR, Liu H, Davis AMJ. 2003. Floc rupture in extensional flow. J. Pulp Paper Sci. 26:377-82
23. Jeffery GB. 1922. The motion of ellipsoidal particles immersed in a viscous fluid. Proc. R. Soc. Lond. 102:161-79
24. Kao S, Mason S. 1975. Dispersion of particles by shear. Nature 253:619-21
25. Kerekes RJ. 2006. Rheology of fibre suspensions in papermaking: an overview of recent research. Nord. Pulp Paper Res. J. 21:598-612 (Pubitemid 46114525)
26. Kiviranta A, Dodson C. 1995. Evaluating Fourdrinier formation performance. J. Pulp Paper Sci. 21:379-84
27. Koch DL. 1995. A model for orientational diffusion in fibre suspensions. Phys. Fluids 7:2086-88
28. Krochak PJ, Olson JA, Martinez DM. 2008. The orientation of semidilute rigid fiber suspensions in a linearly contracting channel. Phys. Fluids 20:073303
29. Lee CW, Brodkey RS. 1987. A visual study of pulp floc dispersion mechanisms. AIChE J. 33:297-302 (Pubitemid 17529207)
30. Lindström SB, Uesaka T. 2008. Particle-level simulation of forming of the fiber network in papermaking. J. Eng. Sci. 46:858-76
31. Lindström SB, Uesaka T. 2009. A numerical investigation of the rheology of sheared fiber suspensions. Phys. Fluids 21:083301
32. Lundell F, Carlsson A. 2010. Heavy ellipsoids in creeping shear flow: transitions of the particle rotation rate and orbit shape. Phys. Rev. E 81:016323
33. Lundell F, Söderberg D, Storey S, Holm R. 2005. The effect of fibres on laminar-turbulent transition and scales in turbulent decay. In Advances in Paper Science and Technology, Trans. 13th Fund. Res. Symp., ed. SJ I'Anson, vol. 3, pp. 19-34. Bury Lancashire, UK: Pulp Paper Fundam. Res. Soc.
34. Martinez DM. 1998. Characterizing the dewatering rate in roll gap formers. J. Pulp Paper Sci. 24:7-13 (Pubitemid 128612183)
35. Mason SG, Manley RSJ. 1957. Particle motion in sheared suspensions: orientations and interaction of rigid rods. Proc. R. Soc. Lond. A 238:117-31
36. Matsubara M, Alfredsson PH. 2001. Disturbance growth in boundary layers subjected to free stream turbulence. J. Fluid Mech. 430:149-68 (Pubitemid 32219402)
37. Nordström B, Norman B. 1994. Influence of sheet anisotropy, formation, z-toughness and tensile stiffness of reduced feed area to a headbox nozzle. Nordic Pulp Paper Res. J. 1:53-59
38. Norman B. 1979. Principles of twin-wire forming. Sven. Papp. 82:330-36
39. Norman B, Moller K, Ek R, Duffy G. 1977. Hydrodynamics of papermaking fibres in water suspensions. In BPBIF 6th Fund. Res. Symp.: Fibre-Water Interaction in Papermaking, ed. H Corte, pp. 195-250. London: Br. Paper Board Ind. Fed., Tech. Div.
40. Olson JA, Frigaard I, Chan C, Hämäläinen JP. 2004. Modeling a turbulent fibre suspension in a planar contraction: the one-dimensional headbox. Int. J. Multiphase Flow 30:51-66 (Pubitemid 38062790)
41. Olson JA, Kerekes RJ. 1998. The motion of fibres in turbulent flow. J. Fluid Mech. 377:47-64 (Pubitemid 128492974)
42. Parker JD. 1972. The Sheet Forming Process. Atlanta: TAPPI
43. Parsheh M, Brown M, Aidun C. 2005. On the orientation of stiff fibres suspended in turbulent flow in a planar contraction. J. Fluid Mech. 545:245-69 (Pubitemid 43091243)
44. Parsheh M, Brown M, Aidun C. 2006. Investigation of closure approximations for fiber orientation distribution in contracting turbulent flow. J. Non-Newton. Fluid Mech. 136:38-49 (Pubitemid 43827516)
45. Paschkewitz JS, Dubief Y, Dimitropoulos CD, Shaqfeh ESG, Moin P. 2004. Numerical simulation of drag reduction using rigid fibres. J. Fluid Mech. 518:281-317 (Pubitemid 39500636)
46. Qi D, Luo LS. 2003. Rotational and orientational behaviour of three-dimensional spheroidal particles in Couette flows. J. Fluid Mech. 477:201-13 (Pubitemid 36440144)
47. Roshanzamir A, Green S, Kerekes R. 1998. Two-dimensional simulation of pressure pulses in blade gap formers. J. Pulp Paper Sci. 24:364-68 (Pubitemid 128612192)
48. Schlichting H. 1999. Boundary Layer Theory. New York: McGraw-Hill
49. Schmid CF, Switzer LH, Klingenberg D. 2000. Simulation of fibre flocculation: effect of fiber properties and interfiber friction. J. Rheol. 44:781-809
50. Shariati M, Bibeau E, Salcudean M, Gartshore I. 2000. Numerical and experimental models of flow in the converging section of a headbox. In TAPPI Papermak. Conf. Trade Fair, vol. 2, pp. 685-93. Atlanta: TAPPI
51. Shin M, Koch D. 2005. Rotational and translational dispersion of fibres in isotropic turbulent flows. J. Fluid Mech. 540:143-73 (Pubitemid 41478933)
52. Söderberg LD. 1999. A comparison between the flow from a paper machine headbox and a low Reynolds number water jet. In TAPPI Eng. Conf, vol. 3, pp. 1155-72. Atlanta: TAPPI
53. Söderberg LD. 2003. Absolute and convective instability of a relaxational plane liquid jet. J. Fluid Mech. 493:89-119 (Pubitemid 37396100)
54. Söderberg LD, Alfredsson PH. 1997. Experiments concerning the creation of streaky structures inside a plane water jet. In Forming Bonds for Better Papermaking, Proc. 1997 Eng. Papermak. Conf., TAPPI Eng. Conf, pp. 1205-22. Atlanta: TAPPI
55. Söderberg LD, Alfredsson PH. 1998. Experimental and theoretical stability investigations of plane liquid jets. Eur. J. Mech. B Fluids 17:689-737 (Pubitemid 128431425)
56. Söderberg LD, Alfredsson PH. 2000. Experiments concerning the origin of streaky structures inside a plane water jet. J. Pulp Paper Sci. 26:395-400 (Pubitemid 32286467)
57. Söderberg LD, Lucisano M. 2005. Reduction of layer mixing through hydrodynamic control. In Advances in Papermaking, 13th Fund. Res. Symp., ed. SJ I'Anson, pp. 83-105. Bury Lancashire, UK: Pulp Paper Fundam. Res. Soc.
58. Soszynski RM, Kerekes RJ. 1988. Elastic interlocking of nylon fibres suspended in liquid, part 2: process of interlocking. Nord. Pulp Paper Res. J. 3:180-84
59. Steen M. 1991. Modeling fibre flocculation in turbulent flows: a numerical study. TAPPI J. 74:175-81
60. Subramanian G, Koch DL. 2005. Inertial effects on fibre motion in simple shear flow. J. Fluid Mech. 535:383-414 (Pubitemid 41052114)
61. Subramanian G, Koch DL. 2006. Inertial effects on the orientation of nearly spherical particles in simple shear flow. J. Fluid Mech. 557:257-96 (Pubitemid 44069748)
62. Tammisola O. 2009. Linear stability of plane wakes and liquid jets: global and local approach. Licentiate thesis, TRITA-MEK 2009:04. R. Inst. Technol., Stockholm. 157 pp.
63. Taylor G. 1957. Fluid dynamics in a papermaking machine. Proc. R. Soc. Lond. A 242:1-15
64. Ullmar M. 1998. On fibre alignment mechanism in a headbox nozzle. Licentiate thesis, R. Inst. Technol., Stockholm. 73 pp.
65. Wildfong V, Shands JA, Bousfield DW, Genco JM. 2000. Drainage during roll forming: model validation using pilot papermachine data. In TAPPI Eng. Conf. CD-ROM. Atlanta: TAPPI
66. Zahrai S, Bark F, Norman B. 1997. An analysis of blade dewatering in a twin-wire paper machine. J. Pulp Paper Sci. 23:452-59
67. Zahrai S, Martinez MD, Dahlkild AA. 1998. Estimating the thickness of the web during twin-wire forming. J. Pulp Paper Sci. 24:67-72 (Pubitemid 128660413)
68. Zhao RH, Kerekes RJ. 1995. Pressure distribution between forming fabrics in blade gap formers: thin blades. J. Pulp Paper Sci. 21:97-103