Monitoring off-line and on-line PD under impulsive voltage on induction motors - Part 2: Testing

IEEE Electrical Insulation Magazine

Volumn 27, Issue 1, 2011, Pages 14-21

  Tozzi, M ^a   Cavallini, A ^b   Montanari, G C ^b  

^a Techimp spa   (Italy)

^b UNIVERSITY OF BOLOGNA   (Italy)

Author keywords

impulsive voltage; inverter fed motor; partial discharge; qualification test; random wound motor; turn insulation; Type I insulation

Indexed keywords

IMPULSIVE VOLTAGE; INVERTER FED MOTORS; QUALIFICATION TEST; TURN INSULATION; TYPE I INSULATION; WOUND MOTOR;

COUNTING CIRCUITS; DRIVES; PARTIAL DISCHARGES; RATING; STATORS; TESTING;

INDUCTION MOTORS;

EID: 79251559379     PISSN: 08837554     EISSN: None     Source Type: Journal    
DOI: 10.1109/MEI.2011.5699443     Document Type: Article

References (22)

1. G. C. Stone, B. K. Gupta, M. Kurtz, and D. K. Sharma, "Investigation of Turn insulation failure mechanisms in large AC motors," IEEE Trans. Power Appl. Syst., vol. PAS-103, no. 9, pp. 2588-2595, Sep. 1984. (Pubitemid 14625935)
2. M. Fenger, S. R. Campbell, and G. Gao, "The impact of surge voltage rise-time on PD inception voltage in random wound motors of different designs," in 2001 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, pp. 352-355, Oct. 2001.
3. G. C. Stone, R. G. van Heeswijk, and R. Bartnikas, "Investigation of the effect of repetitive voltage surges on epoxy insulation," IEEE Trans. Energy Convers., vol. 7, no. 4, pp. 754-759, Dec. 1992.
4. M. Kaufhold, G. Borner, M. Eberhardt, and J. Speck, "Failure mechanisms of low voltage electric machines fed by pulse-controlled inverters," IEEE Elect. Insul. Mag., vol. 12, no. 5, pp. 9-15, Sep./Oct. 1996.
5. W. Yin, "Failure mechanism of winding insulation in inverter-fed motors," IEEE Electr. Insul. Mag., vol. 13, no. 6, pp. 18-23, Nov./Dec. 1997.
6. J. P. Bellomo, P. Castelan, and T. Lebey, "The effect of pulsed voltages on dielectric material properties," IEEE Trans. Dielectr. Electr. Insul., vol. 6, no. 1, pp. 20-26, Feb. 1999.
7. D. Fabiani and G. C. Montanari, "The effect of voltage distortion on aging acceleration of insulation systems under partial discharge activity," IEEE Electr. Insul. Mag., vol. 17, no. 3, pp. 24-33, May/Jun. 2001.
8. D. Fabiani, G. C. Montanari, and A. Contin, "Aging acceleration of insulating materials for electrical machine windings supplied by PWM in the presence and in the absence of partial discharges," in ICSD'01. Proceedings of the 2001 IEEE 7th International Conference on Solid Dielectrics, pp. 283-286, 2001.
9. D. Fabiani and G. C. Montanari, "Life comparison of enamelled wires for inverter-fed motors," in Proceedings of APDATM, pp. 192-195, 2004.
10. S. Grzybowski and S. Bandaru, "Effect of frequency, temperature, and voltage on the lifetime characteristics of magnet wires under pulse voltages," in Proceedings of the 2004 IEEE International Conference on Solid Dielectrics, 2004. ICSD 2004, pp. 876-879, 2004.
11. Electrical Insulation Systems - Electrical Stresses Produced by Repetitive Impulses - Part 1: General Method of Evaluation of Electrical Endurance, IEC 62068-1 Ed. 1.0, 2003.
12. Electrical Insulating Materials and Systems - Electrical Measurement of Partial Discharges (PD) Under Short Rise Time and Repetitive Voltage Impulses, IEC 61934 TS Ed. 1.0, 2006.
13. G. C. Stone and I. Culbert, "Experience with partial discharge testing during voltage surges as required by IEC 60034-18-41," in INSUCON 2009 Proceedings, May 2009, pp. XX.
14. Rotating Electrical Machines - Part 18-42: Qualification and Type Tests for Type II Electrical Insulation Systems Used in Rotating Electrical Machines Fed from Voltage Converters, IEC 60034-18-42 TS Ed. 1.0, 2008.
15. Rotating Electrical Machines - Part 18-41: Qualification and Type Tests for Type I Electrical Insulation Systems Used in Rotating Electrical Machines Fed from Voltage Converters, IEC 60034-18-41 TS Ed. 1.0, 2006.
16. M. Tozzi, A. Cavallini and G. C. Montanari, "Monitoring off-line and online PD under impulsive voltage on induction motors - Part 1: standard procedure," IEEE Electr. Insul. Mag., vol. 26, no. 4, pp. 16-26, Jul./Aug. 2010.
17. M. Tozzi, G. C. Montanari, D. Fabiani, A. Cavallini, and G. Gao, "Offline and on-line PD measurements on induction motors fed by power electronic impulses," in IEEE Electrical Insulation Conference, 2009. EIC 2009, pp. 420-424, May 2009.
18. A. Cavallini, D. Fabiani, G. C. Montanari, and M. Tozzi, "Partial discharge detection techniques in inverter-fed induction motors," in INSUCON 2009 Proceedings, May 2009, pp. 140-144.
19. A. Contin, A. Cavallini, G. C. Montanari, C. Hudon, M. Belec, and D. N. Nguyen, "Searching for indexes suitable for rotating machines diagnosis" in Conference Record of the 2006 IEEE International Symposium on Electrical Insulation, Jun. 2006, pp 101-105.
20. A. Contin, A. Cavallini, G. C. Montanari, G. Pasini, and F. Puletti, "Digital detection and fuzzy classification of partial discharge signals," IEEE Trans. Dielectr. Electr. Insul., vol. 9, no. 3, pp. 335-348, Jun. 2002.
21. A. Cavallini, G. C. Montanari, A. Contin, and F. Puletti, "A new approach to the diagnosis of solid insulation systems based on PD signal inference," IEEE Electr. Insul. Mag., vol. 19, no. 2, pp. 23-30, Apr. 2003.
22. S. R. Campbell and G. Stone, "Examples of stator winding partial discharge due to inverter drives," in Conference Record of the 2000 IEEE International Symposium on Electrical Insulation, pp. 231-234, Apr. 2000.