Effect of bimodal grain size distribution on scatter in toughness

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 40, Issue 4, 2009, Pages 780-795

  Chakrabarti, Debalay ^a   Strangwood, Martin ^b   Davis, Claire ^b  

^a INDIAN INSTITUTE OF TECHNOLOGY   (India)

^b UNIVERSITY OF BIRMINGHAM   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

BI-MODAL GRAIN STRUCTURE; BIMODAL DISTRIBUTION; BIMODAL GRAIN-SIZE DISTRIBUTION; CHARPY ENERGY; CHARPY IMPACT; CLEAVAGE FRACTURE; CLEAVAGE FRACTURE TOUGHNESS; COARSE GRAINS; FERRITE GRAIN SIZE; FINE GRAINS; FRACTURE STRESS; FRACTURE TEST; GRAIN SIZE; GRAIN SIZE DISTRIBUTION; LARGE-GRAIN; TEST RESULTS; UNIMODAL; UNIMODAL DISTRIBUTION;

BRITTLE FRACTURE; CHARPY IMPACT TESTING; FERRITE; FERRITES; FRACTURE TESTING; FRACTURE TOUGHNESS; MICROSTRUCTURE; SIZE DETERMINATION; SIZE DISTRIBUTION;

GRAIN SIZE AND SHAPE;

EID: 79151468991     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-009-9794-4     Document Type: Article

References (55)

1. E. Orowan: Trans. Inst. Eng. Shipbuilders Scotland, Institute of Engineers and Shipbuilders in Scotland, Glasgow, Scotland, United Kingdom, 1946, vol. 80, pp. 165-96.
2. A.H. Cottrell: Trans. AIME, 1958, vol. 212, pp. 192-203.
3. E. Smith: Proc. Conf. Physical Basis of Yield and Fracture, Institute of Physics and Physical Society, Oxford, United Kingdom, 1966, pp. 36-45.
4. C.J. McMahon and M. Cohen: Acta Metall., 1965, vol. 13, pp. 591-604.
5. J.F. Knott: Fundamentals of Fracture Mechanics, Butterworth and Co., London, 1973, pp. 170-85.
6. J.H. Chen and C. Yan: Metall. Trans. A, 1992, vol. 23A, pp. 2549- 56.
7. D.A. Curry and J.F. Knott: Met. Sci., 1978, vol. 12, pp. 511-14.
8. J.F. Knott: Conf. Proc. Steels for Line Pipe and Pipeline Fittings, The Metals Society, London, United Kingdom, 1983, pp. 79-89.
9. N.J. Petch: Acta Metall., 1986, vol. 34, pp. 1387-93.
10. A. Echeverria and J.M. Rodriguez-Ibabe: Mater. Sci. Eng., A, 2003, vol. 346, pp. 149-58.
11. D. Chakrabarti, C.L. Davis, and M. Strangwood: Mater. Charact., 2007, vol. 58, pp. 423-38.
12. J.F. Knott: Proc. Int. Conf. Microalloyed Steels-Emerging Technologies and Applications, Vitasta Publishing Pvt. Ltd., New Delhi, India, 2007, pp. 10-23.
13. R.O. Ritchie, J.F. Knott, and J.R. Rice: J. Mech. Phys. Solids, 1973, vol. 21, pp. 395-410.
14. D. Bhattacharjee, J.F. Knott, and C.L. Davis: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 121-30.
15. S.J. Wu and C.L. Davis: Mater. Sci. Eng., A, 2004, vols. 387-389, pp. 456-60.
16. M.T. Shehata and J.D. Boyd: Proc. Conf. Advances in Physical Metallurgy and Applications of Steels, Liverpool, 1982, Metals Society, London, 1982, Book 284, pp. 229-36.
17. G.Z. Wang and J.H. Chen: Int. J. Fract., 1998, vol. 89, pp. 269-84.
18. S.J. Wu and J.F. Knott: J. Mech. Phys. Solids, 2004, vol. 52, pp. 907-24.
19. J.H. Chen, L. Zhu, and H. Ma: Acta Metall. Mater., 1990, vol. 38, pp. 2527-35.
20. D. Chakrabarti: Doctoral Thesis, University of Birmingham, Birmingham, United Kingdom, 2007.
21. J.R. Griffiths and D.R.J. Owen: J. Mech. Phys. Solids, 1971, vol. 19, pp. 419-31.
22. R. Ding, A. Islam, S. Wu, and J.F. Knott: Mater. Sci. Technol., 2005, vol. 21, pp. 467-75.
23. L.P. Zhang: Doctoral Thesis, University of Birmingham, Birmingham, United Kingdom, 1999.
24. G.E. Dieter: Mechanical Metallurgy, McGraw-Hill Book Company, London, 1988, pp. 275-338.
25. D. Tabor: Proc. R. Soc. London, Ser. A, 1947, vol. 192, pp. 247-74.
26. D. Bhattacharjee, C.L. Davis, and J.F. Knott: Ironmaking and Steelmaking, 2003, vol. 30, pp. 249-55.
27. C.L. Davis: Doctoral Thesis, University of Cambridge, Cambridge, United Kingdom, 1994.
28. BSEN 14556: Standard on Steel: Charpy V-Notch Pendulum Impact Test, Instrumented Test Method, BSI British Standard, London, United Kingdom, 2000, pp. 1-28.
29. M. Mantyla, A. Rossoll, I. Nedbal, C. Prioul, and B. Marini: J. Nucl. Mater., 1999, vol. 264, pp. 257-62.
30. M.A. Linaza, J.L. Romero, J.M. Rodriguez-Ibabe, and J.J. Urcola: Scripta Metall., 1995, vol. 32, pp. 395-400.
31. W. Lei, D. Li, and M. Yao: Scripta Metall., 1994, vol. 31 (1), pp. 5-7.
32. Y.K. Lee: J. Mater. Sci. Lett., 2002, vol. 21 (16), pp. 1253-55.
33. W. Steven and A.G. Haynes: JISI, 1956, vol. 183, pp. 349-59.
34. D.P. Fairchild, D.G. Howden, and W.A.T. Clark: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 641-52.
35. M.J. Balart, C.L. Davis, and M. Strangwood: Mater. Sci. Eng A, 2000, vol. 284, pp. 1-13.
36. J.H. Chen, G.Z. Wang, Q. Wang, and Y.G. Liu: Int. J. Fract., 2004, vol. 126, pp. 223-41.
37. G.Z. Wang, Y.G. Liu, and J.H. Chen: Mater. Sci. Eng., A, 2004, vol. 369, pp. 181-91.
38. J.H. Chen and C. Yan: Mater. Sci. Technol., 1992, vol. 23A, pp. 509-17.
39. J.H. Chen, G.Z. Wang, and H. Ma: Metall. Trans. A, 1990, vol. 21A, pp. 321-30.
40. T. Gladman: The Physical Metallurgy of Microalloyed Steels, Book 615, The Institute of Materials, London, 1997, pp. 176-223.
41. S. Gunduz and R.C. Cochrane: Mater. Des., 2005, vol. 26, pp. 486-92.
42. E.V. Morales, J. Gallego, and H.J. Kestenbach: Philos. Mag. Lett., 2003, vol. 83, pp. 79-87.
43. C.Z. Wang, J.H. Chen, and J.G. Wang: Int. J. Fract., 2002, vol. 118, pp. 211-27.
44. G.Z. Wang, J.G. Wang, and J.H. Chen: Eng. Fract. Mech., 2003, vol. 70, pp. 2499-2512.
45. M.G. Mendiratta, R.L. Goetz, and D.M. Dimiduk: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3903-12.
46. P. Bowen, S.G. Druce, and J.F. Knott: Acta Metall., 1986, vol. 34 (6), pp. 1121-31.
47. J.I. San Martin and J.M. Rodriguez-Ibabe: Scripta Mater., 1999, vol. 40, pp. 459-64.
48. J.H. Chen, G.Z. Wang, C. Yan, H. Ma, and L. Zhu: Int. J. Fract., 1997, vol. 83, pp. 139-57.
49. A. From and R. Sandstrom: Mater. Charact., 1999, vol. 42, pp. 111-22.
50. F. Vodopivec, B. Arzensek, D. Kmetic, and J. Vojvodic-Tuma: Mater. Technol., 2003, vol. 37, pp. 317-26.
51. H. Qiu, R. Ito, and K. Hiraoka: Mater. Sci. Eng., A, 2006, vols. 435-436, pp. 648-52.
52. P. Hausild, C. Berdin, and P. Bompard: Mater. Sci. Eng., A, 2005, vol. 391, pp. 188-97.
53. P. Shanmugam and S.D. Pathak: Eng. Fract. Mech., 1996, vol. 53, pp. 991-1005.
54. D. Talbot: Doctoral Thesis, University of Birmingham, Birmingham, United Kingdom, 2002.
55. S.J. Wu and C.L. Davis: J. Microsc., 2004, vol. 213, pp. 262-72.