Sources and characteristics of unbalanced magnetic pull in three-phase cage induction motors with axial-varying rotor eccentricity

IEEE Transactions on Industry Applications

Volumn 47, Issue 1, 2011, Pages 12-24

  Dorrell, David G ^a  

^a UNIVERSITY OF TECHNOLOGY SYDNEY   (Australia)

Author keywords

Induction motor; rotor eccentricity; unbalanced magnetic pull (UMP)

Indexed keywords

AXIAL VARIATIONS; CAGE INDUCTION MOTORS; DIFFERENTIAL FLUX; FREQUENCY OPERATION; KEYPOINTS; ROTOR ECCENTRICITY; STATIC ECCENTRICITIES; THREE-PHASE CAGE INDUCTION MOTORS; UNBALANCED MAGNETIC PULL;

INDUCTION MOTORS;

EID: 78751660884     PISSN: 00939994     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIA.2010.2090845     Document Type: Article

References (42)

1. A. Belahcen and A. Arkkio, "Computation of additional losses due to rotor eccentricity in electrical machines," IET Elect. Power Appl., vol. 4, no. 4, pp. 259-266, Apr. 2010.
2. J. Faiz and M. Ojaghi, "Unified winding function approach for dynamic simulation of different kinds of eccentricity faults in cage induction machines," IET Elect. Power Appl., vol. 3, no. 5, pp. 461-470, Sep. 2009.
3. M. Blödt, J. Regnier, and J. Faucher, "Distinguishing load torque oscillations and eccentricity faults in induction motors using stator current Wigner distributions," IEEE Trans. Ind. Appl., vol. 45, no. 6, pp. 1991- 2000, Nov./Dec. 2009.
4. J. Faiz, B. M. Ebrahimi, and H. A. Toliyat, "Effect of magnetic saturation on static and mixed eccentricity fault diagnosis in induction motor," IEEE Trans. Magn., vol. 45, no. 8, pp. 3137-3144, Aug. 2009.
5. L. Wu, X. Huang, T. G. Habetler, and R. G. Harley, "Eliminating load oscillation effects for rotor eccentricity detection in closed-loop driveconnected induction motors," IEEE Trans. Power Electron., vol. 22, no. 7, pp. 1543-1551, Jul. 2007.
6. K. P. Kovacs, "Two-pole induction-motor vibrations caused by homopolar alternating fluxes," IEEE Trans. Power App. Syst., vol. PAS-96, no. 4, pp. 1105-1108, Jul. 1977.
7. R. Belmans, W. Heylen, A. Vandenput, and W. Geysen, "Influence of rotor-bar stiffness on the critical speed of an induction motor with an aluminium squirrel cage," Proc. Inst. Elect. Eng. B, vol. 131, no. 5, pp. 203-208, Sep. 1984.
8. R. Belmans, A. Vandenput, and W. Geysen, "Influence of unbalanced magnetic pull on the radial stability of flexible-shaft induction machines," Proc. Inst. Elect. Eng. B, vol. 134, no. 2, pp. 101-109, Mar. 1987.
9. M.-J. Kim, B.-K. Kim, J.-W. Moon, Y.-H. Cho, D.-H. Hwang, and D.-S. Kang, "Analysis of inverter-fed squirrel-cage induction motor during eccentric rotor motion using FEM," IEEE Trans. Magn., vol. 44, no. 6, pp. 1538-1541, Jun. 2008.
10. R. Perers, U. Lundin, and M. Leijon, "Saturation effects on unbalanced magnetic pull in a hydroelectric generator with an eccentric rotor," IEEE Trans. Magn., vol. 34, no. 10, pp. 3884-3890, Oct. 2007.
11. L. Wang, R. W. Cheung, Z. Ma, J. Ruan, and Y. Peng, "Finite-element analysis of unbalanced magnetic pull in a large hydro-generator under practical operations," IEEE Trans. Magn., vol. 44, no. 6, pp. 1558-1561, Jun. 2008.
12. K. P. P. Pillai, A. S. Nair, and G. R. Bindu, "Unbalanced magnetic pull in train-lighting brushless alternators with static eccentricity," IEEE Trans. Veh. Technol., vol. 57, no. 1, pp. 120-126, Jan. 2008.
13. Z. Q. Zhu, D. Ishak, D. Howe, and J. Chen, "Unbalanced magnetic forces in permanent-magnet brushless machines with diametrically asymmetric phase windings," IEEE Trans. Magn., vol. 43, no. 6, pp. 1544-1554, Nov./Dec. 2007.
14. J. T. Li, Z. J. Liu, and L. H. A. Nay, "Effect of radial magnetic forces in permanent magnet motors with rotor eccentricity," IEEE Trans. Magn., vol. 43, no. 6, pp. 2525-2527, Jun. 2007.
15. I. Husain, A. Radun, and J. Nair, "Unbalanced force calculation in switched-reluctance machines," IEEE Trans. Magn., vol. 36, no. 1, pp. 330-338, Jan. 2000.
16. D. G. Dorrell and A. C. Smith, "Calculation of U.M.P. in induction motors with series or parallel winding connections," IEEE Trans. Energy Convers., vol. 9, no. 2, pp. 304-310, Jun. 1994.
17. D. G. Dorrell and A. C. Smith, "The calculation and measurement of unbalanced magnetic pull in cage induction motors with eccentric rotors. Part 2: Experimental investigation," Proc. Inst. Elect. Eng.-Elect. Power Appl., vol. 143, no. 3, pp. 202-210, May 1996.
18. A. Burakov and A. Arkkio, "Comparison of the unbalanced magnetic pull mitigation by the parallel paths in the stator and rotor windings," IEEE Trans. Magn., vol. 43, no. 12, pp. 4083-4088, Jan. 2007.
19. M. J. DeBortoli, S. J. Salon, and C. J. Slavik, "Effects of rotor eccentricity and parallel windings on induction machine behavior: A study using finite element analysis," IEEE Trans. Magn., vol. 29, no. 2, pp. 1676-1682, Mar. 1993.
20. P. Frauman, A. Burakov, and A. Arkkio, "Effects of the slot harmonics on the unbalanced magnetic pull in an induction motor with an eccentric rotor," IEEE Trans. Magn., vol. 43, no. 8, pp. 3441-3444, Aug. 2007.
21. X. Li, Q. Wu, and S. Nandi, "Performance analysis of a three-phase induction machine with inclined static eccentricity," IEEE Trans. Ind. Appl., vol. 43, no. 2, pp. 531-541, Mar./Apr. 2007.
22. M. Bradford, "Unbalanced magnetic pull in a 6-pole induction motor," Proc. Inst. Elect. Eng., vol. 115, no. 11, pp. 1619-1627, Nov. 1968.
23. K. J. Binns and M. Dye, "Identification of principal factors causing unbalanced magnetic pull in cage induction motors," Proc. Inst. Elect. Eng., vol. 120, no. 3, pp. 349-354, Mar. 1973.
24. A. Burakov and A. Arkkio, "Low-order parametric force model for eccentric-rotor electrical machine with parallel connections in stator winding," Proc. Inst. Elect. Eng.-Elect. Power Appl., vol. 153, no. 4, pp. 592-600, Jul. 2006.
25. A. Burakov and A. Arkkio, "Low-order parametric force model for eccentric-rotor electrical machine equipped with parallel stator windings and rotor cage," IET Elect. Power Appl., vol. 1, no. 4, pp. 532-542, Jul. 2007.
26. A. C. Smith and D. G. Dorrell, "The calculation and measurement of unbalanced magnetic pull in cage induction motors with eccentric rotors. Part 1: Analytical model," Proc. Inst. Elect. Eng.-Elect. Power Appl., vol. 143, no. 3, pp. 193-201, May 1996.
27. M. J. DeBortoli, S. J. Salon, D. W. Burow, and C. J. Slavik, "Effects of rotor eccentricity and parallel windings on induction machine behaviour: A study using finite element analysis," IEEE Trans. Magn., vol. 29, no. 2, pp. 1676-1682, Mar. 1993.
28. A. Arkkio, M. Antila, K. Pokki, A. Simon, and E. Lantto, "Electromagnetic force on a whirling cage rotor," Proc. Inst. Elect. Eng.-Elect. Power Appl., vol. 147, no. 5, pp. 353-360, Sep. 2000.
29. D. G. Dorrell, "Experimental behaviour of unbalanced magnetic pull in 3-phase induction motors with eccentric rotors and the relationship with tooth saturation," IEEE Trans. Energy Convers., vol. 14, no. 3, pp. 304- 309, Sep. 1999.
30. D. G. Dorrell, W. T. Thomson, and S. Roach, "Analysis of airgap flux, current and vibration signals as a function of the combination of static and dynamic airgap eccentricity in 3-phase induction motors," IEEE Trans. Ind. Appl., vol. 33, no. 1, pp. 24-34, Jan./Feb. 1997.
31. D. G. Dorrell, "Modelling non-uniform rotor eccentricity and the calculation of unbalanced magnetic pull in cage induction machines," in Proc. ICEM, Helsinki, Finland, Aug. 2000.
32. Y. Akiyama, "Unbalanced heating phenomena of induction motor with eccentricity," in Conf. Rec. IEEE IAS Annu. Meeting, Oct. 4-9, 1992, pp. 107-114.
33. D. G. Dorrell, "Modelling rotor eccentricity in cage induction motors with axial variation of eccentricity," in Proc. 30th Universities Power Eng. Conf., Sep. 5-7, 1995, vol. 1, pp. 1-4.
34. D. G. Dorrell, "Assessment of the unbalanced magnetic pull due to axial variation of rotor eccentricity in cage induction motors," in Proc. 32nd Int. Symp. Elect. Mach., Cracow, Poland, Jun. 26-29, 1996, pp. 123-128.
35. A. Tenhunen, "Finite-element calculation of unbalanced magnetic pull and circulating current between parallel windings in induction motor with non-uniform eccentric rotor," in Proc. Electromotion, Bologna, Italy, Jun. 19-20, 2001, pp. 19-24.
36. A. Tenhunen, T. Benedetti, T. P. Holopainen, and A. Arkkio, "Electromagnetic forces in cage induction motors with rotor eccentricity," in Proc. IEEE IEMDC, Jun. 1-4, 2003, vol. 3, pp. 1616-1622.
37. A. Tenhunen, T. Benedetti, T. P. Holopainen, and A. Arkkio, "Electromagnetic forces of the cage rotor in conical whirling motion," Proc. Inst. Elect. Eng.-Elect. Power Appl., vol. 150, no. 5, pp. 563-568, Sep. 2003.
38. D. G. Dorrell, "Calculation of unbalanced magnetic pull in small cage induction motors with skewed rotors and dynamic rotor eccentricity," IEEE Trans. Energy Convers., vol. 11, no. 3, pp. 483-488, Sep. 1996.
39. D. G. Dorrell, P. J. Holik, P. Lombard, H.-J. Thougaard, and F. Jensen, "A multisliced finite-element model for induction machines incorporating interbar current," IEEE Trans. Ind. Appl., vol. 45, no. 1, pp. 131-141, Jan./Feb. 2009.
40. D. G. Dorrell, M. Popescu, D. Ionel, and C. Cossar, "Unbalanced magnetic pull in fractional-slot brushless PM motors," in Conf. Rec. IEEE IAS Annu. Meeting, Edmonton, AB, Canada, Sep. 2008, pp. 1-8.
41. B. Heller and V. Hamata, Harmonic Field Effects in Induction Machines. Amsterdam, The Netherlands: Elsevier, 1977.
42. D. G. Dorrell, "The sources and characteristics of unbalanced magnetic pull in cage induction motors with either static or dynamic eccentricity," in Proc. IEEE Int. Symp. Elect. Power Eng., Stockholm, Sweden, Jun. 18-22, 1995, pp. 229-234.