Nanomaterials: Properties, Preparation and Applications

Environmental and Human Health Impacts of Nanotechnology

Volumn , Issue , 2009, Pages 31-77

  Christian, Paul ^a  

^a UNIVERSITY OF MANCHESTER   (United Kingdom)

Author keywords

Bottom up approach in nanoparticle preparation and best route for mass produced nanoparticles; Challenges facing nanoparticle production; Flame pyrolysis type preparation methods; Nano clays post processed form of layered montmorillonite silicates; Nanomaterials properties, preparation and applications; Nanoparticle architecture; Nanoparticle preparation; Nanoparticles and nanotechnology applications; Nanotechnology nanomachines and mechanically passive nanoparticles; Rotaxane based molecular switch

Indexed keywords

EID: 78751635094     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781444307504.ch2     Document Type: Chapter

References (81)

1. Afzaal, M. and P. O'Brien (2006) Recent developments in II-VI and III-VI semiconductors and their applications in solar cells; Journal of Materials Chemistry, 16, 1597-602.
2. Anderson, P., M. Grant, R. McInnes and W. Farino (1982) Analysis of fiber release from certain asbestos products, Prepared for Chemical Control Division, Office of Pesticides and Toxic Substances, US Environmental Protection Agency, Washington, DC, EPA no. 68-01-5960.
3. Andersson, M., L. Osterlund, S. Ljungstrom and A. Palmqvist (2002) Preparation of nanosize anatase and rutile TiO2 by hydrothermal treatment of microemulsions and their activity for photocatylytic wet oxidation of phenol; Journal of Physical Chemistry B, 106, 10674-9.
4. Aveyard, R., B. P. Binks and J. H. Clint (2003) Emulsions stabilised solely by colloidal particles; Advances in Colloid and Interface Science, 100-102, 503-46.
5. Avouris, P., Z. Chen and V. Perebenios (2007) Carbon based electronics; Nature nanotechnol-ogy, 2, 605-15.
6. Balzani, V., M. Clemente-Leon, A. Credi, et al. (2006) Autonomous artificial nanomotor powered by sunlight; Proceedings of the National Academy of Sciences, 103, 1178-1183.
7. Binks, B. P., J. H. Clint, P. D. I. Fletcher, et al. (2006) Growth of gold nanoparticles films driven by the coalescence of particle-stabilised emulsion drops; Langmuir, 22, 4100-03.
8. Bukowski, T. J. and J. H. Simmons (2002) Quantum Dot Research: Current State and Future Prospects; Critical Reviews in Solid State and Materials Sciences, 27, 119-142.
9. Castleman, B. (2006) Asbestos products, hazards and regulation; International Journal of Heath Services, 36, 295-307.
10. Christian, P. and P. O'Brien (2005) A new route to nanorods of cadmium sulfide; Chemical Communications, 2817-9.
11. Christian, P. and P. O'Brien (2008) Thermodynamic and kinetic control of crystal growth in CdS nanomaterials ; Journal of Materials Chemistry, 18, 1689-93.
12. Cox, H., et al. (2004) Nanocomposite Systems for Automotive Applications; 4th World Congress in Nanocomposites, EMC, San Francisco, September 2005, 1-3.
13. Darque-Ceretti, E., D. Helary, A. Bouquillon and M. Aucouturier (2005) Gold like lustre: nanometric surface treatment for decoration of glazed ceramics in ancient Islam, Moresque Spain and renaissance Italy; Surface Engineering, 21, 352-8.
14. Duguet, E., S. Vasseur, S. Mornet and J. M. Devoisselle (2006) Magnetic nanoparticles and their applications in medicine; Nanomedicine, 1, 157-68.
15. Elliott, D. W. and W. X. Zhang (2001) Field assessment of nanoscale bimetallic particles for groundwater treatment; Environmental Science & Technology, 35, 4922-6.
16. Gao, F. (2004) Clay/Polymer Composites: the Story; Materials Today, 7, 50-5.
17. Gardiner, K. (1995) Effects on respiratory morbidity of occupational exposure to carbon black: a review; Archives of Environmental Health., 50, 44-52.
18. Guardia, P., B. Batlle-Brugal, A. G. Roca, et al. (2007) Surfactant effects in magnetite nanoparticles of controlled size ; Journal of Magnetism and Magnetic Materials, 316, c756-9.
19. Harrison, R. D. (1984) Nuffield book ofdata (2nd edn), Longman Group Ltd, London.
20. Hartlieb, K. J., C. L. Raston and M. Saunders (2007) Controlled scaleable synthesis of ZnO nanoparticles; Chemistry Materials, 19, 5453-9.
21. Hua, C. and C.-M. Dong (2007) Synthesis, characterisation, effect of architecture on crystallization of biodegradable poly(E-caprolactone)-b-poly(ethylene oxide), copolymers with different arms and nanoparticles thereof; Journal of Biomedical Materials Research Part A, 689.
22. Hussain, F., M.Hojjati, M. Okamoto and R. E. Gorga (2006) Polymer-matrix nanocomposites, processing, manufacturing and application: An overview; Journal of Composite Materials, 40, 1511-75.
23. Jeon, H. J., S. C. Yi and S. G. Oh (2003) Preparation and antibacterial effects of Ag SiO2 thin films by sol-gel method; Biomaterials, 24, 4921-8.
24. Kim, J. S., E. Kuk and K. N. Yu (2007) Antimicrobial effects of silver nanoparticles; Nanomedicine: Nanotechnology, Biology, and Medicine, 3, 95-101.
25. Kunze, U. (2002) Nanoscale devices fabricated by dynamic ploughing with an atomic force microscope; Superlattices and Microstructures, 31, 3-17.
26. Langer, A. (1974) The subject of continuous vigilance; Environmental Health Perspectives, 9, 53-6.
27. Leggett, G. J. (2006) Scanning near-field photolithography-surface photochemistry with nanoscale spatial resolution; Chemical Society Reviews, 35, 1150-61.
28. Leuenberger, M. N. and D. Loss (2000) Spin tunnelling and phonon-assisted relaxation in Mn12-acetate ; Physical Review B, 61, 1286-302.
29. Li, B., L. Wang, B. Kang, et al. (2006) Review of recent progress in solid-state dye-sensitized solar cells; Solar Energy Materials & Solar Cells, 90, 549-73.
30. Li, Y., I. A. Kinloch and A. H. Windle (2004) Direct spinning for carbon nanotube fibres from chemical vapour deposition synthesis; Science, 304, 276-8.
31. Liedl, T., T. L. Sobey and F. C. Simmel (2007) DNA-based nanodevices; Nanotoday, 2, 36-41.
32. Liu, Y., S. He, M. Uehara and H. Maeda (2007) Wet chemical preparation of well dispersed colloidal cerium oxide nanocrystals ; Chemistry Letters, 36, 764-5.
33. Long, D-L., E. Burkholder and L. A. Cronin (2007) Polyoxometalate clusters, nanostructures and materials: From self assembly to designer materials and devices; Chem. Soc. Rev., 36, 105-21.
34. Lyon, D., L. Adams, J. C. Falkner and P. J. Alvarez (2006) Antibacterial Activity of Fullerene Water Suspensions: Effects of Preparation Method and Particle Size; Environ. Sci. Technol., 40, 4360-6.
35. Mana, L., E. C. Scher and A. P. Alivisatos (2000) Synthesis of soluble and processable rod-, arrow-, teardrop-, and tetrapod-shaped CdSe nanocrystals; Journal of the American Chemical Society, 112, 12700-6.
36. Mendes, P. M., S. Jacke, K. Critchley, et al. (2004) Gold Nanoparticle Patterning of Silicon Wafers Using Chemical e-Beam Lithography; Langmuir, 20, 3766-8.
37. Murry, C. B., D. J. Norris and M. Bawendi (1993) Synthesis and characterization of nearly monodisperse CdE (E = S, Se Te), semiconductor nanocrystallites ; The Journal of the American Chemical Society, 115, 8706-15.
38. Nennemann, A., M. Voetz, G. Hey, et al. (2006) Colloid chemical interactions of silica particles in the Cu-CMP-process; Progress in Colloid and Polymer Science, 133, 159-68.
39. NIOSH (1972) Criteriafor a recommended standard-Occupational exposure to asbestos; US Department of Health, Education, and Welfare, Public Health Service, Centers for Disease Control, National Institute for Occupational Safety and Health Washington, DC, HSM-72-10267.
40. NIOSH (2004) What is nanotechnology, National Institute for Occupational Safety and Health, Washington, DC, 175.
41. Nohynek, G. J., J. Lademann, J. Ribaud and M. S. Roberts (2007) Grey goo on the skin? Nanotechnology, cosmetic and sunscreen safety; Critical Reviews in Toxicology, 37, 251-77.
42. Nolan, R. P., A. M. Langer and R. Wilson (1999) A risk assessment for exposure to grunerite asbestos (amosite) in an iron ore mine; Proceedings of the National Academy of Science, 96, 3412-9.
43. OSHA (1986) Occupational exposure to asbestos, tremolite, anthophyllite, and Actinolite. Occupational Safety and Health Administration. Washington, DC, US Department of Labor. 29 CFR Parts 1910 and 1926, 51, 119, 22612-790.
44. OSHA (1994) Occupational exposure to asbestos; Final rule. Occupational Safety and Health Administration, Washington, DC, US Department of Labor. 29 CFR Parts 1910, 1915, and 1926, 59, 153, 40964-1162.
45. Ozin, G. A., I. Manners, S. Fournier-Bidoz and A. Arsenault (2005) Dream Nanomachines; Advanced Materials, 17, 3011-8.
46. Parkin, I. G. and R. G. Palgrave (2005) Self cleaning coatings; Journal of Materials Chemistry, 15, 1689-95.
47. Patterson, F. (2004). Nanocomposites-Our Revolutionary Breakthrough;4th World Congress in Nanocomposites, EMC, San Francisco, September 2004, 1-3.
48. Performance Composites Ltd (2008) online data sheet available at: http://www.performance-composites.co.uk/carbonfibre/structuralprofile.asp
49. Phenrat, T., N. Saleh, K. Sirk, et al. (2007) Stabilization of aqueous nanoscale zerovalent iron dispersions by anionic polyelectrolytes: adsorbed anionic polyelectrolyte layer properties and their effect on aggregation and sedimentation ; Journal of Nanoparticle Research, 10, 795-814.
50. Pijeret, D., R. A. v Delden, A. Meetsma and B. L. Feringa (2005) Acceleration of a nanomo-tor: Electronic control of the rotary speed of a light-driven molecular rotor; Journal of the American Chemical Society, 127, 17612-3.
51. Pillai, O. and R. Panchagnula (2001) Polymers in drug delivery; Current Opinion in Chemical Biology, 5, 447-51.
52. Pratsinis, S. E. (1998) Flame aerosol synthesis of ceramic powders; Prog. Energ. Combust., 24, 197-219.
53. Qiu, S., J. Dong and G. Chen (1999) Preparation of Cu nanoparticles from water-in-oil microemulsions; Journal of Colloid and Interface Science, 216, 230-4.
54. Royal Society & The Royal Academy of Engineering (2004) Nanoscience and nanotechnolo-gies: opportunities and uncertainties, July 2004. London. (Also The Royal Society's website www.royalsoc.ac.uk/policy and The Royal Academy of Engineering's website www.raeng. org.uk.).
55. Sau, T. K., A. Pal and T. Pal (2001) Size regime dependent catalysis by gold nanoparticles fro the reduction of eosin ; Journal of Physical Chemistry B, 105, 9266-72.
56. Saunders, J. R., D. Benfield, W. Moussa and A. Amirfazli (2007) Nanotechnology's implications for select systems of renewable energy; International Journal of Green Energy, 4, 483-503.
57. SCENIHR (2005) Request for a Scientific Opinion on the Appropriateness of Existing Methodologies to Assess the Potential Risks Associated with Engineered and Adventitious Nanotechnologies. SCENIHR/002/05 (Scientific Committee on Emerging and Newly Identified Health Risks, http://ec.europa.eu/health/ph_risk/committees/04_scenihr/docs/scenihr_o_003.pdf (March 09).
58. Schnippering, M., M. Carrara, A. Foelske, et al. (2007) Electronic properties of Ag nanopar-ticle arrays. A Kelvin probe and high resolution XPS study; Physical Chemistry and Chemical Physics, 9, 725-30.
59. Shaw, D. J. (1992) Introduction to colloid and surface chemistry (4th edn); ButterworthHeinemann Ltd, Oxford, UK.
60. Simmons, B. A., S. Li, V. T. John, et al. (2002) Morphology of CdS nanocrystals synthesised in a mixed surfactant system; Nanoletters, 2, 263-8.
61. Soong, R. K., G. D. Bachand, H. P. Neves, et al. (2000) Powering an Inorganic Nanodevices with a Biomolecular Motor; Science, 290, 1555-8.
62. Spengler, J. D., J. M. Samet and J. F. McCarthy (2001) The in-door air quality handbook, McGraw-Hill, New York.
63. Starzyk, E., A. Frydrych and A. Solyga (2008) Nanotechnology: Does it have a Future in Cosmetics? SOFW-Journal, 134, 42-52.
64. Sun, Y. G., B. Mayers, T. Herricks and Y. N. Xia (2003) Polyol synthesis of uniform silver nanowires: a plausible growth mechanism and the supporting evidence; Nanoletters, 3, 955-60.
65. Tee, Y. H., E. Grulke and D. Bhattacharyya (2005) Role of Ni/Fe nanoparticle composition on the degradation of trichloroethylene from water; Industrial Engineering Chemistry Research, 44, 7062-70.
66. Thostensona, E. T., Z. Renb and T. W. Chou (2001) Advances in the science and technology of carbon nanotubes and their composites: a review; Composites Science and Technology, 61, 1899-912.
67. Uhrich, K. E., S. M. Cannizzaro, R. S. Langer and K. M. Shakesheff (1999) Polymeric systems for controlled drug release; Chemical Reviews, 99, 3181-98.
68. Ulrich, G. D. (1984) Flame synthesis of fine particles; Chemical Engineering News, 62, 22-9.
69. Ung, D., Y. Soumare, N. Chakroune, et al. (2007) Growth of magnetic nanowires and nanod-umbbells in liquid polyol; Chemistry of Materials, 19, 2084-94.
70. US Environmental Protection Agency (1988) Asbestos exposure assessment. EPA Chemical Engineering Branch, Office of Pesticides and Toxic Substances, Washington, DC.
71. Usuki, A., M. Kawasumi, Y. Kojima, et al. (1993) Swelling Behavior of Montmorillonite Cation Exchanged for omega-amino Acids by E-caprolactam; Materials Research, 8, 1174-8.
72. Vallarino, M. S. (2001) Fibres, in The indoor air quality handbook, (eds Spengler, J. D., McCarthy J. F. and Samet J. M.), McGraw-Hill, New York.
73. Vicario, J., N. Katsonis, B. S. Ramon, et al. (2006) Nanomotor rotates microscale objects; Nature, 440, 163.
74. Walter, P., E. Welcomme, P. Hallegot, et al. (2006) Early use of PdS nanotechnology for an anchient hair dying formula; Nano Letters, 6, 2215-9.
75. Wang, C. B. and N. D. Zhang (1997) Synthesizing nanoscale iron particles for rapid and complete dechlorination of TCE and PCBs.; Environmental Science and Technology, 31, 2154-6.
76. 3N. Formation and characterisation of nanocrystalline GaN powders; European Journal of Solid State and Inorganic Chemistry, 33, 1079-90.
77. Williams, P. R. D., A. D. Phelka and D. J. Paustenbach (2007) A review of historical exposures to asbestos among skilled craftsmen (1940-2006); Journal of Toxicology and Environmental Health, Part B, 10, 319-77.
78. Wooldridge, M. S. (1998) Gas-phase combustion synthesis of particles; Progress in Energy Combustion, 24, 63-87.
79. Xu, Y. F., M. L. Yan and D. J. Sellmyer (2007) FePt nanocluster films for high-density magnetic recording; Journal of Nanoscience and Nanotechnology, 7, 206-24.
80. Yu, M. F., O. Lourie, M. J. Dyer, et al. (2000) Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load; Science, 287, 637-40.
81. Zaizer, E. M. and V. K. Lamer (1948) The kinetics of the form and growth of monodisperse hydrosols; Journal of Colloid Science, 3, 571-98.