Sol-gel coating to reduce 1.25Cr-0.5Mo steel oxidation at 700°C: Catalyst type effect

Corrosion Science

Volumn 53, Issue 3, 2011, Pages 1060-1065

  Baron, Y S ^a   Ruiz, A ^a  

^a UNIVERSIDAD SIMÓN BOLÍVAR   (Venezuela)

Author keywords

A. Low alloy steel; B. Weight loss; C. High temperature corrosion

Indexed keywords

1.25CR-0.5MO STEEL; BASIC CATALYSTS; C. HIGH TEMPERATURE CORROSION; COATED SAMPLE; CRACK FREE; ETHYL-ACETATE; HIGH TEMPERATURE OXIDATION; HYDROLYSIS RATE; LOW ALLOY STEELS; MOLE RATIO; OXIDATION RATES; SEM-EDX; SOL-GEL COATINGS; WEIGHT LOSS; ZIRCONIA COATINGS;

CATALYSTS; CORROSION; CRACKS; GELS; GRAVIMETRIC ANALYSIS; MOLYBDENUM; OXIDATION; SOL-GEL PROCESS; SOL-GELS; SOLS; STEEL METALLURGY; ZIRCONIA; ZIRCONIUM;

CHROMATE COATINGS;

EID: 78751575376     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2010.11.043     Document Type: Article

References (33)

1. Li H., Liang K., Mei L., Gu S. Oxidation resistance of mild steel by zirconia sol-gel coatings. Mater. Sci. Eng. A 2003, 341:87-90.
2. 2 sol-gel films on mild steel for corrosion protection in acid medium. J. Mater. Sci. Lett. 1998, 17:295-298.
3. 2 films on the adhesion of organic coatings. J. Adhesion Sci. Technol. 2001, 15:793-808.
4. Baron Y.S., Ruiz A., Navas G. High temperature oxidation resistance of 1.25Cr-0.5Mo wt.% steels by zirconia coating. Surface Coatings Technol. 2008, 202:2616-2622.
5. 2 films. Thin Solid Films 1996, 286:127-135.
6. 2 coatings on stainless steel. J. Non-Cryst. Solids 1992, 147-148:813-819.
7. Shane M., Mecartney M.L. Sol-gel synthesis of zirconia barrier coatings. J. Mater. Sci. 1990, 25:1537-1544.
8. Izumi K., Murakami M., Deguchi T., Morita A. Zirconia coating on stainless steel sheets from organo zirconium compounds. J. Am. Ceram. Soc. 1989, 72:1465-1468.
9. Li H., Liang K., Mei L., Gu S., Wang S. Oxidation protection of mild steel by zirconia sol-gel coatings. Mater. Lett. 2001, 51:320-324.
10. Paterson M.J., Ben-Nissan B. Multilayer sol-gel zirconia coatings on 316 stainless steel. Surface Coatings Technol. 1996, 86-87:153-158.
11. Innocenzi P.C., Guglielmi M., Gobbin M., Colombo P. Coating of metals by the sol-gel dip-coating method. J. Eur. Ceram. Soc. 1992, 10:431-436.
12. Viazzi C., Bonino J.P., Ansart F. Synthesis by sol-gel route and characterization of yttria stabilized zirconia coatings for thermal barrier applications. Surface Coatings Technol. 2006, 201:3889-3893.
13. Sanchez C., Livage J., Henry M., Babonneau F. Chemical modification of alkoxide precursors. J. Non-Cryst. Solids 1988, 100:65-76.
14. C.J. Brinker, G.W. Scherer, Sol-gel Science, The Physics and Chemistry of Sol-gel Processing, Academic Press, USA, 1990, pp. 47-50.
15. Brinker C.J., Hurd A.J., Schunk P.R., Frye G.C., Ashley C.S. Review of sol-gel thin film formation. J. Non-Cryst. Solids 1992, 147-148:424-436.
16. Scherer G.W. Theory of drying. J. Am. Ceram. Soc. 1990, 73:3-14.
17. Lan W., Wang X., Xiao P. Agglomeration on drying of yttria-stabilized-zirconia slurry on a metal substrate. J. Eur. Ceram. Soc. 2006, 26:3599-3606.
18. Smith D.M., G, Scherer W., Anderson J.M. Shrinkage during drying of silica gel. J. Non-Cryst. Solids 1995, 188:191-206.
19. Neda Z., Leung K., Jozsa L., Ravasz M. Spiral cracks in drying precipitates. Phys. Rev. Lett. 2002, 88:95502-95504.
20. Yamada K., Chow T.Y., Horihata T., Nagata M. A low temperature synthesis of zirconium oxide coating using chelating agents. J. Non-Cryst. Solids 1988, 100:316-320.
21. Chatry M., Henry M., M, In, Sanchez C., Livage J. The role of complexing ligands in the formation of non-aggregated nanoparticles of zirconia. J. Sol-Gel Sci. Technol. 1994, 1:233-240.
22. Hayashi H., Suzuki H., Kaneko S. Effect of chemical modification on hydrolysis and condensation reaction of zirconium alkoxide. J. Sol-Gel Sci. Technol. 1998, 12:87-94.
23. Sanchez C., In M. Molecular design of alkoxide precursors for the synthesis of hybrid organic-inorganic gels. J. Non-Cryst. Solids 1992, 147-148:1-12.
24. Yi G., M, Sayer An acetic acid/water based sol-gel PZT process I: modification of Zr and Ti alkoxides with acetic acid. J. Sol-Gel Sci. Technol. 1996, 6:65-74.
25. Di Maggio R., Campostrini R., Guella G. Gels from modified zirconium n-butoxide: a pyrolysis study by coupled thermogravimetry gas chromatographic and mass spectrometric analyses. Chem. Mater. 1998, 10:3839-3847.
26. Diaz-Parralejo A., Macias-Garcia A., Sanchez-Gonzalez J., Diaz-Diez M.A., Cuerda-Correa E.M. Influence of the experimental parameters on the synthesis process of yttria-doped zirconia sol-gel films. Surface Coatings Technol. 2010, 204:2257-2261.
27. Huntz A.M. Parabolic laws during high temperature oxidation: relations with the grain size and thickness of the oxide. J. Mater. Sci. Lett. 1999, 18:1981-1984.
28. N. Birks, G. Meier, Introduction to High Temperature Oxidation of Metals, Edward Arnold, England, 1983, pp. 59-65.
29. Chen R., Yuen W. Review of the high-temperature oxidation of iron and carbon steels in air or oxygen. Oxid. Met. 2003, 59:433-468.
30. Monceau D., Pieraggi B. Determination of parabolic rate constants from a local analysis of mass-gain curves. Oxid. Met. 1998, 50:477-493.
31. 2 sol-gel coatings for protection of metallic substrates against high temperature oxidation. Thin Solid Films 1996, 289:213-219.
32. Guglielmi M. Sol-gel coatings on metals. J. Sol-Gel Sci. Technol. 1997, 8:443-449.
33. Schutze M. Stress effects in high temperature oxidation. Shreir's Corrosion 2010, 1:153-179.