Extraction of alumina powders from the oil shale ash by hydrometallurgical technology

Powder Technology

Volumn 207, Issue 1-3, 2011, Pages 343-347

  Miao, Lina ^a   Ji, Guijuan ^a   Gao, Guimei ^a   Li, Guanghuan ^a   Gan, Shucai ^a  

^a JILIN UNIVERSITY   (China)

Author keywords

Alumina; Box Behenken statistical design

Indexed keywords

ACID CONCENTRATIONS; ALUMINA POWDER; ALUMINUM METAL; BOX-BEHNKEN; EXTRACTION EFFICIENCIES; EXTRACTION PROCESS; HYDROMETALLURGICAL TECHNOLOGY; NEW SOLUTIONS; OIL SHALE ASH; OPTIMUM CONDITIONS; REACTION TEMPERATURE; REACTION TIME; STATISTICAL DESIGN; ULTRAFINE SILICAS;

DESIGN; EXTRACTION; OIL SHALE; OPTIMIZATION; POWDER METALS; SHALE; SHALE OIL; SILICA; SULFUR DETERMINATION; SULFURIC ACID;

OIL SHALE PROCESSING;

ALUMINUM OXIDE; SILICON DIOXIDE; SULFURIC ACID;

ARTICLE; ASH; CHEMICAL COMPOSITION; CONCENTRATION (PARAMETERS); CONTROLLED STUDY; FEASIBILITY STUDY; HYDROMETALLURGICAL TECHNOLOGY; METALLURGY; OIL SHALE; PHYSICAL CHEMISTRY; POWDER; PROCESS DESIGN; PROCESS OPTIMIZATION; PURIFICATION; REACTION TIME; SEPARATION TECHNIQUE; SYNTHESIS; TEMPERATURE SENSITIVITY; ULTRASTRUCTURE;

EID: 78751574312     PISSN: 00325910     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.powtec.2010.11.017     Document Type: Article

References (32)

1. Holopainen H. Experience of oil shale combustion in Ahlstorm Pyroflow CFB-boiler. Oil Shale 1993, 8:194-205.
2. Jiang X.M., Liu D.C., Chen H.P. Experimental investigation on oil shale circulating fluidized bed boiler. Oil Shale 2001, 18:73-83.
3. Rubens Eduardo M.N. Petrosix process reaches commercial stage. Proceedings-American Petroleum Institute, Refining Department, Kansas City, USA 1985, vol 64:223-229. API, Washington.
4. Shawabkeh R., Al-Harahsheh A. Conversion of oil shale ash into zeolite for cadmium and lead removal from wastewater. Fuel 2004, 83:981-985.
5. Machado N.R.C.F., Miotto D.M.M. Synthesis of Na-A and -X zeolites from oil shale ash. Fuel 2005, 84:2289-2294.
6. Velts O., Uibu M., Rudjak I., Kallas J., Kuusik R. Utilization of oil shale ash to prepare PCC: leachibility dynamics and equilibrium in the ash-water system. Energy Procedia 2009, 1:4843-4850.
7. Shawabkeh R., Al-Harahsheh A., Al-Otoom A. Copper and zinc sorption by treated oil shale ash. Sep. Purif. Technol. 2004, 40:251-257.
8. Al-Qodah Z., Shawaqfeh A.T., Lafi W.K. Adsorption of pesticides from aqueous solutions using oil shale ash. Desalination 2007, 208:294-305.
9. Shawabkeh R.A. Adsorption of chromium ions from aqueous solution by using activated carbo-aluminosilicate material from oil shale. J. Colloid. Interface Sci. 2006, 299:530-536.
10. 3 reinforced Fe-Cr-Ni composites. Mater. Sci. Eng. A 2003, 344:245-252.
11. Cejka J. Organized mesoporous alumina: synthesis, structure and potential in catalysis. Appl. Catal. A Gen. 2003, 254:327-338.
12. Mukhopadhyay S., Ghosh S., Mahapatra M.K. Easy-to-use mullite and spinel sols as bonding agents in a high-alumina based ultra low cement castable. Ceram. Int. 2002, 28:719-729.
13. Itoh N., Kato K., Tsuji T., Hongo M. Preparation of a tubular anodic aluminum oxide membrane. J. Membr. Sci. 1996, 117:189-196.
14. Wang J., Yang H., Chen G., Lu J. Preparation of lightweight alumina ceramic with in-situ synthesis of nanometer alumina powders as sintering agent. J. Chin. Ceram. Soc. 2003, 31:133-137.
15. Berrin Gürel S., Akin Altun Reactive alumina production for the refractory industry. Powder Technol. 2009, 196:115-121.
16. Boumaza A., Djelloul A., Guerrab F. Specific signatures of α-alumina powders prepared by calcination of boehmite or gibbsite. Powder Technol. 2010, 201:177-180.
17. Caiut J.M.A., Dexpert-Ghys J., Kihn Y., Vérelst M., et al. Elaboration of beohmite nano-powders by spray-pyrolysis. Powder Technol. 2009, 190:95-98.
18. Livingston W.R., Rogers D.A., Chapman R.J., et al. The use of coal spoils as feed materials for alumina recovery by acid leaching route, 2: The effect of the calcinations conditions on the leaching properties of the colliery spoil. Hydrometallurgy 1983, 10:97-109.
19. Livingston W.R., Rogers D.A., Chapman R.J., et al. The use of coal spoils as feed materials for alumina recovery by acid leaching route, 3: The effect of the leaching conditions on the extraction of aluminium and iron from a fluidized bed ash. Hydrometallrugy 1985, 13:283-291.
20. Dash B., Das B.R., Tripathy B.C., Bhattacharya I.N., Das S.C. Acid dissolution of alumina from waste aluminium dross. Hydrometallurgy 2008, 92:48-53.
21. Matjie R.H., Bunt J.R., van Heerden J.H.P. Extraction of alumina from coal fly ash generated from a selected low rank bituminous South African coal. Miner. Eng. 2005, 18:299-310.
22. Bazin C., El-Quassiti K., Ouellet V. Sequential leaching for the recovery of alumina from a Canadian clay. Hydrometallurgy 2007, 88:196-201.
23. An B.C., Ji G.J., Wang W.Y., Gan S.C. Azeotropic distillation-assisted preparation of nanoscale gamma-alumina powder from waste oil shale ash. Chem. Eng. J. 2010, 157:67-72.
24. 3 from oil shale ash. Energy 2010, 35:45-49.
25. Lavssamayer D., Steiner B. Xylanase formation by Sclerotium rolfsii effect of growth substrates and development of a culture medium using statistical designed experiments. Appl. Microbiol. Biotechnol. 1994, 42:522-530.
26. 3 powder via co-precipitation method. Powder Technol. 2008, 183:161-168.
27. Gangadharan D., Sivaramakrishnan S. Response surface methodology for the optimization of alpha amylase production by Bacillus amyloliquefaciens. Bioresour. Technol. 2008, 99:4597-4602.
28. Kincl M., Turk S., Vrecer F. Application of experimental design methodology in development and optimization of drug release method. Int. J. Pharm. 2005, 291:39-49.
29. Lai Yi-Ling, Annadurai Gurusamy, Huang Fu-Chuang, Lee Jiunn-Fwu Biosorption of Zn(II) on the different Ca-alginate beads from aqueous solution. Bioresour. Technol. 2008, 99:6480-6487.
30. Rana-Madaria P., Nagarajan M., Rajagopal C. Removal of chromium from aqueous solutions by treatment with carbon aerogel electrodes using response surface methodology. Ind. Eng. Chem. Res. 2005, 44:6549-6559.
31. Gao G.M., Zou H.F., Liu D.R., Gan S.C. Synthesis of ultrafine silica powders based on oil shale ash by fluidized bed drying of wet-gel slurry. Fuel 2009, 88:1223-1227.
32. Fan M., Brown R.C., Wheelock T.D. Production of a complex coagulant from fly ash. Chem. Eng. J. 2005, 106:269-277.