Numerical modeling of fluid flow and heat transfer in a narrow Taylor-Couette-Poiseuille system

International Journal of Heat and Fluid Flow

Volumn 32, Issue 1, 2011, Pages 128-144

  Poncet, Sébastien ^a   Haddadi, Sofia ^a   Viazzo, Stéphane ^a  

^a AIX MARSEILLE UNIVERSITÉ   (France)

Author keywords

Heat transfer; RANS modeling; Reynolds stress model; Taylor Couette Poiseuille flow; Turbulence

Indexed keywords

ASPECT RATIO; CYLINDERS (SHAPES); HEAT TRANSFER; REYNOLDS NUMBER; TURBULENCE; VELOCITY DISTRIBUTION;

COUETTE-POISEUILLE FLOW; FLOW RATE COEFFICIENTS; FLUID FLOW AND HEAT TRANSFERS; MEAN VELOCITY DISTRIBUTION; RANS MODELING; REYNOLDS STRESS MODELS; ROTATIONAL REYNOLDS NUMBERS; TAYLOR-COUETTE SYSTEMS;

FLOW OF FLUIDS;

EID: 78751572863     PISSN: 0142727X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijheatfluidflow.2010.08.003     Document Type: Article

References (45)

1. Elena L., Schiestel R. Turbulence modeling of rotating confined flows. Int. J. Heat Fluid Flow 1996, 17:283-289.
2. Schiestel R., Elena L. Modeling of anisotropic turbulence in rapid rotation. Aerospace Sci. Technol. 1997, 7:441-451.
3. Poncet, S., 2005. Écoulements de Type Rotor-Stator Soumis à un Flux Axial: de Batchelor à Stewartson. Ph.D. thesis, Université de Provence.
4. Poncet S., Chauve M.P., Schiestel R. Batchelor versus Stewartson flow structures in a rotor-stator cavity with throughflow. Phys. Fluids 2005, 17(075110).
5. Haddadi, S. and Poncet, S., 2008. Turbulence modeling of torsional Couette flows. Int. J. Rotat. Mach. (Article ID 635138).
6. Poncet S., Schiestel R. Numerical modeling of heat transfer and fluid flow in rotor-stator cavities with throughflow. Int. J. Heat Mass Transfer 2007, 50(7-8):1528-1544.
7. Escudier M.P., Gouldson I.W. Concentric annular flow with centerbody rotation of a newtonian and a shear-thinning liquid. Int. J. Heat Fluid Flow 1995, 16:156-162.
8. Naser J.A. Prediction of newtonian and non-newtonian flow through concentric annulus with centerbody rotation. International Conference on CFS in Mineral and Metal Processing and Power Generation 1997, CSIRO.
9. Giret, A., 2009, Transferts Thermiques Convectifs dans le cadre de Machines Tournantes, Ph.D. thesis, Université de Poitiers.
10. Kaye J., Elgar E.C. Modes of adiabatic and diabatic fluid flow in an annulus with an inner rotating cylinder. Trans. ASME 1958, 80:753-765.
11. Becker K.M., Kaye J. Measurement of diabatic flow in an annulus with an inner rotating cylinder. Trans. ASME, J. Heat Transfer 1962, 84:97-105.
12. Aoki H., Nohira H., Arai H. Convective heat transfer in an annulus with an inner rotating cylinder. Bull. JSME 1967, 10(39):523-532.
13. Kuzay T.M., Scott C.J. Turbulent heat transfer studies in annulus with inner cylinder rotation. J. Heat Transfer 1977, 99:12-19.
14. Lee Y.N., Minkowycz W.J. Heat transfer characteristics of the annulus of two-coaxial cylinders with one cylinder rotating. Int. J. Heat Mass Transfer 1989, 32(4):711-722.
15. Nouri J.M., Whitelaw J.H. Flow of newtonian and non-newtonian fluids in a concentric annulus with rotation of the inner cylinder. J. Fluid Eng. 1994, 116:821-827.
16. Nouri J.M., Whitelaw J.H. Flow of newtonian and non-newtonian fluids in an eccentric annulus with rotation of the inner cylinder. Int. J. Heat Fluid Flow 1997, 18:236-246.
17. Bouafia M., Bertin Y., Saulnier J., Ropert P. Analyse expérimentale des transferts de chaleur en espace annulaire étroit et rainuré avec cylindre intérieur tournant. Int. J. Heat Mass Transfer 1998, 41(10):1279-1291.
18. Char M.I., Hsu Y.H. Numerical prediction of turbulent mixed convection in a concentric horizontal rotating annulus with low-Re two-equation models. Int. J. Heat Mass Transfer 1998, 41(12):1633-1643.
19. Kuosa M., Sallinen P., Larjola J. Numerical and experimental modelling of gas flow and heat transfer in the air gap of an electric machine. J. Therm. Sci. 2004, 13(3):264-278.
20. Chung S.Y., Sung H.J. Large-eddy simulation of turbulent flow in a concentric annulus with rotation of an inner cylinder. Int. J. Heat Fluid Flow 2005, 26:191-203.
21. Elena L., Schiestel R. Turbulence modeling of confined flow in rotating disk systems. AIAA J. 1995, 33(5):812-821.
22. Poncet S., Schiestel R., Monchaux R. Turbulence modeling of the Von Kármán flow: viscous and inertial stirrings. Int. J. Heat Fluid Flow 2008, 29(1):62-74.
23. Launder B.E., Tselepidakis D.P. Application of a new second-moment closure to turbulent channel flow rotating in orthogonal mode. Int. J. Heat Fluid Flow 1994, 15(1):2-10.
24. Daly B.J., Harlow F.H. Transport equation for turbulence. Phys. Fluids A 1970, 13(11):2634-2649.
25. Gibson M., Launder B.E. Ground effects on pressure fluctuations in the atmospheric boundary layer. J. Fluid. Mech. 1978, 86(3):491-511.
26. Launder B.E., Reynolds W.C. Asymptotic near-wall stress dissipation rates in a turbulent flow. Phys. Fluids A 1983, 26(5):1157-1158.
27. Cambon C., Jacquin L. Spectral approach to non-isotropic turbulence subjected to rotation. J. Fluid Mech. 1989, 202:295-317.
28. Launder, B.E., Reynolds, W.C., Rodi, W., Mathieu, J., and Jeandel, D., 1984, In: Eyrolles (Ed.), Turbulence Models and their Applications, Paris.
29. Schiestel R. Les écoulements Turbulents: Modélisation et Simulation 1998, Hermès, Paris.
30. Ong, C.L., 1988, Computation of Fluid Flow and Heat Transfer in Rotating Disc Systems, Ph.D. thesis, University of Sussex.
31. Iacovides H., Chew J.W. The computation of convective heat transfer in rotating cavities. Int. J. Heat Fluid Flow 1992, 14(2):146-154.
32. Taylor G.I. Distribution of velocity and temperature between concentric rotating cylinders. Proc. Roy. Soc. A 1935, 265:494-512.
33. Polkowski J.W. Turbulent flow between coaxial cylinders with inner cylinder rotating. Trans. ASME, J. Gas Turb. Power 1984, 106(1):128-135.
34. Lumley J.L. Computational modeling of turbulent flows. Adv. Appl. Mech. 1978, 18:123-176.
35. Hanjalic K., Launder B.E. Contribution towards a Reynolds-stress closure for low-Reynolds number turbulence. J. Fluid Mech. 1976, 74:583-610.
36. Gazley C. Heat transfer characteristics of the rotational and axial flow between concentric cylinders. Trans. ASME 1958, 80:79-90.
37. Tachibana F., Fukui S. Convective heat transfer of the rotational and axial flow between two concentric cylinders. Bull. JSME 1964, 7(26):385-391.
38. Owen J.M., Rogers R.H. Flow and Heat Transfer in Rotating-Disc Systems, Rotor-Stator Systems 1989, vol. 1. John Wiley and Sons Inc., New-York.
39. Poncet S., Serre E. High-order LES of turbulent heat transfers in a rotor-stator cavity. Int. J. Heat Fluid Flow 2009, 30(4):590-601.
40. Roy R.P., Xu G., Feng J. A study of convective heat transfer in a model rotor-stator disk cavity. ASME J. Turbomach. 2001, 123:621-632.
41. Simmers D.A., Coney J.E.R. A Reynolds analogy solution for the heat transfer characteristics of combined Taylor vortex and axial flows. Int. J. Heat Mass Transfer 1979, 22:679-689.
42. Owen, J.M., Haynes, C.M., 1976. Design formulae for the heat loss and frictional resistance of air-cooled rotating discs. In: Improvements in Fluid Mechanics and Systems for Energy Conversion, vol. 4., Milan.
43. Fasquelle, A., 2007, Contribution à la modélisation multi-physique: électro-vibro-acoustique et aérothermique de machines de traction, Ph.D. thesis, École Centrale de Lille.
44. Grosgeorges, M., 1983, Contribution à l'étude du refroidisement d'une paroi tournante par air chargé d'huile, Ph.D. thesis, Université de Nancy.
45. Peres, I., 1995, Contribution à l'analyse de l'écoulement et des transferts convectifs dans un espace annulaire lisse ou encoché par voie de simulations numériques. Application à un Transfert de Moteur Électrique Rapide, Ph.D. thesis, Université de Poitiers.