Corrosion behaviour and surface analysis of a Co-Cr and two Ni-Cr dental alloys before and after simulated porcelain firing

European Journal of Oral Sciences

Volumn 119, Issue 1, 2011, Pages 93-101

  Qiu, Jing ^a,b   Yu, Wei Qiang ^a   Ohang, Fu Qiang ^a   Smales, Roger J ^b,c   Ohang, Yi Lin ^a   Lu, Chun Hui ^a  

^a SHANGHAI SECOND MEDICAL UNIVERSITY   (China)

^b NANJING MEDICAL UNIVERSITY   (China)

^c UNIVERSITY OF ADELAIDE   (Australia)

Author keywords

Cobalt alloy; Corrosion; Metal ion release; Nickel alloy; Surface analysis

Indexed keywords

ALLOY; BERYLLIUM; CHROMIUM DERIVATIVE; COBALT; MOLYBDENUM; NICKEL; NICKEL CHROMIUM BERYLLIUM ALLOY; NICKEL-CHROMIUM-BERYLLIUM ALLOY; OXIDE; SALIVA SUBSTITUTE;

ARTICLE; CHEMISTRY; CORROSION; DENTAL CARE; DENTURE; HARDNESS; MATERIALS TESTING; SURFACE PROPERTY; TOOTH PROSTHESIS; X RAY PHOTOELECTRON SPECTROSCOPY;

BERYLLIUM; CHROMIUM ALLOYS; COBALT; CORROSION; DENTAL CASTING TECHNIQUE; DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; HARDNESS; MATERIALS TESTING; METAL CERAMIC ALLOYS; MOLYBDENUM; NICKEL; OXIDES; PHOTOELECTRON SPECTROSCOPY; SALIVA, ARTIFICIAL; SURFACE PROPERTIES;

EID: 78751554290     PISSN: 09098836     EISSN: 16000722     Source Type: Journal    
DOI: 10.1111/j.1600-0722.2011.00791.x     Document Type: Article

References (38)

1. O'connor RP, Mackert JR jr, Myers ML, Parry EE. Castability, opaque masking and porcelain bonding of 17 porcelain-fused-to-metal alloys. J Prosthet Dent 1996; 75: 367-374.
2. Leinfelder KF. An evaluation of casting alloys used for restorative procedures. J Am Dent Assoc 1997; 128: 37-45.
3. Craig RG, Powers JM. Restorative Dental Materials, 7th edn. St Louis: Mosby, 2002; 128.
4. Setcos JC, Babaei-Mahani A, Di Silvio L, Mjör IA, Wilson NHF. The safety of nickel containing dental alloys. Dent Mater 2006; 22: 1163-1168.
5. Schmalz G, Garhammer P. Biological interactions of dental cast alloys with oral tissues. Dent Mater 2002; 18: 396-406.
6. Viennot S, Dalard F, Malquarti G, Grosgogeat B. Combination fixed and removable prostheses using a CoCr alloy: a clinical report. J Prosthet Dent 2006; 96: 100-103.
7. Huang HH. Effect of chemical composition on the corrosion behavior of Ni-Cr-Mo dental casting alloys. J Biomed Mater Res 2002; 60: 458-465.
8. Al-Hity RR, Kappert HF, Viennot S, Dalard F, Grosgogeat B. Corrosion resistance measurements of dental alloys, are they correlated? Dent Mater 2007; 23: 679-687.
9. Roach MD, Wolan JT, Parsell DE, Bumgardner JD. Use of X-ray photoelectron spectroscopy and cyclic polarization to evaluate the corrosion behavior of six nickel-chromium alloys before and after porcelain-fused-to-metal firing. J Prosthet Dent 2000; 84: 623-634.
10. Lin HY, Bowers B, Wolan JT, Cai O, Bumgardner JD. Metallurgical, surface, and corrosion analysis of Ni-Cr dental casting alloys before and after porcelain firing. Dent Mater 2008; 24: 378-385.
11. De Micheli DM, Riesgo D. Electrochemical behavior of chromium-cobalt and nickel-chromium dental alloys used in fixed prosthetics. Dent Press 1981; 17: 24-29.
12. Viennot S, Dalard F, Lissac M, Grosgogeat B. Corrosion resistance of cobalt-chromium and palladium-silver alloys used in fixed prosthetic restorations. Eur J Oral Sci 2005; 113: 90-95.
13. Reclaru L, Lüthy H, Eschler PY, Blatter A, Susz C. Corrosion behaviour of cobalt-chromium dental alloys doped with precious metals. Biomaterials 2005; 26: 4358-4365.
14. Mareci D, Nemtoi G, Aelenei N, Bocanu C. The electrochemical behaviour of various non-precious Ni and Co based alloys in artificial saliva. Eur Cell Mater 2005; 10: 1-7.
15. Ardlin BI, Dahl JE, Tibballs JE. Static immersion and irritation tests of dental metal-ceramic alloys. Eur J Oral Sci 2005; 113: 83-89.
16. Wylie CM, Shelton RM, Fleming GJ, Davenport AJ. Corrosion of nickel-based dental casting alloys. Dent Mater 2007; 23: 714-723.
17. Matkovic T, Matkovic P, Malina J. Effects of Ni and Mo on the microstructure and some other properties of Co-Cr dental alloys. J Alloys Compd 2004; 366: 293-297.
18. Saji VS, Choe H-C. Electrochemical behavior of Co-Cr and Ni-Cr dental cast alloys. Trans Nonferrous Met Soc China 2009; 19: 785-790.
19. Hsua RWW, Yang CC, Huang CA, Chen YS. Electrochemical corrosion studies on Co-Cr-Mo implant alloy in biological solutions. Mater Chem Phys 2005; 93: 531-538.
20. Baran G. Auger chemical analysis of oxides on Ni-Cr alloys. J Dent Res 1984; 63: 76-80.
21. Sharma M, Kumar AV, Singh N. Electrochemical corrosion behaviour of dental/implant alloys in saline medium. J Mater Sci Mater Med 2008; 19: 2647-2653.
22. Ameer MA, Khamis E, Al-Motlaq M. Electrochemical behaviour of recasting Ni-Cr and Co-Cr non-precious dental alloys. Corros Sci 2004; 46: 2825-2836.
23. Geis-Gerstorfer J, Pässler K. Studies on the influence of Be content on the corrosion behavior and mechanical properties of Ni-25Cr-10Mo alloys. Dent Mater 1993; 9: 177-181.
24. Bumgardner JD, Lucas LC. Surface analysis of nickel-chromium dental alloys. Dent Mater 1993; 9: 252-259.
25. Huang HH. Surface characterization of passive film on NiCr-based dental casting alloys. Biomaterials 2003; 24: 1575-1582.
26. Morris HF. Veterans Administration Cooperative Studies Project No. 147/242. Part VII: the mechanical properties of metal ceramic alloys as cast and after simulated porcelain firing. J Prosthet Dent 1989; 61: 160-169.
27. Winkler S, Morris HF, Monteiro JM. Changes in mechanical properties and microstructure following heat treatment of a nickel-chromium base alloy. J Prosthet Dent 1984; 52: 821-827.
28. Lagdive SB, Meshram S. A comparative evaluation of the effect of simulated porcelain firing cycle on the mechanical properties and microstructure of nickel-chromium-based ceramic alloys. Indian J Dent Res 2008; 8: 78-82.
29. Morris HF. Properties of cobalt-chromium metal ceramic alloys after heat treatment. J Prosthet Dent 1990; 63: 426-433.
30. Singla A, Shetty P, Joseph M, Kotian R Comparative evaluation of the effect of simulated porcelain firing cycle on the mechanical properties and microstructure of base metal ceramic alloys. Indian J Dent Res 1999; 10: 122-129. (Erratum: 2000; 11: 50).
31. International Organization for Standardization. Dentistry - Metallic Materials for Fixed and Removable Restorations and Appliances. ISO 22674:2006. Genèva, Switzerland: International Organization for Standardization, 2006.
32. Bumgardner JD, Lucas LC. Cellular response to metallic ions released from nickel-chromium dental alloys. J Dent Res 1995; 74: 1521-1527.
33. Bumgardner JD, Doeller J, Lucas LC. Effect of nickel-based dental casting alloys on fibroblast metabolism and ultrastructural organization. J Biomed Mater Res 1995; 29: 611-617.
34. Lewis JB, Messer RL, Mccloud VV, Lockwood PE, Hsu SD, Wataha JC. Ni (II) activates the Nrf2 signaling pathway in human monocytic cells. Biomaterials 2006; 27: 5348-5356.
35. Wataha JC, Lewis JB, Volkmann KR, Lockwood PE, Messer RL, Bouillaguet S. Sublethal concentrations of Au (III), Pd (II), and Ni (II) differentially alter inflammatory cytokine secretion from activated monocytes. J Biomed Mater Res B Appl Biomater 2004; 69: 11-17.
36. Issa Y, Brunton P, Waters CM, Watts DC. Cytotoxicity of metal ions to human oligodendroglial cells and human gingival fibroblasts assessed by mitochondrial dehydrogenase activity. Dent Mater 2008; 24: 281-287.
37. Geis-Gerstorfer J, Sauer KH, Pässler K. Ion release from Ni-Cr-Mo and Co-Cr-Mo casting alloys. Int J Prosthodont 1991; 4: 152-158.
38. Metikos-Huković M, Pilić O, Babić R, Omanović D. Influence of alloying elements on the corrosion stability of CoCrMo implant alloy in Hank's solution. Acta Biomater 2006; 2: 693-700.