Changes caused by heat treatment in chemical composition and some physical properties of acacia hybrid sapwood

Holzforschung

Volumn 65, Issue 1, 2011, Pages 67-72

  Tuong, Vu Manh ^a   Li, Jian ^a  

^a NORTHEAST FORESTRY UNIVERSITY   (China)

Author keywords

Acacia hybrid; heat treatment; swelling; water absorption; X ray photoelectron spectroscopy (XPS)

Indexed keywords

ACACIA HYBRID; ACACIA MANGIUM; AFTER-HEAT TREATMENT; CHEMICAL CHANGE; CHEMICAL COMPOSITIONS; DEGRADATION PRODUCTS; HYDROXYL GROUPS; IN-WATER ABSORPTION; INTERACTIVE EFFECT; LABORATORY CONDITIONS; TREATMENT TEMPERATURE; WOOD SURFACES; X-RAY PHOTO;

ABSORPTION SPECTROSCOPY; CHEMICAL ANALYSIS; DEGRADATION; ELECTRON SPECTROSCOPY; HEAT TREATMENT; PHOTOELECTRICITY; PHOTONS; PHYSICAL PROPERTIES; SWELLING; WATER TREATMENT; WOOD PRODUCTS; X RAY PHOTOELECTRON SPECTROSCOPY; X RAYS;

WATER ABSORPTION;

ACACIA; CHEMICAL ANALYSIS; DEGRADATION; ELECTRON SPECTROSCOPY; ESCA; HEAT TREATMENT; PHYSICAL PROPERTIES; SWELLING; WATER ABSORPTION; WATER TREATMENT; WOOD PRODUCTS; X RAY SPECTROSCOPY; X RAYS;

ACACIA;

EID: 78651450020     PISSN: 00183830     EISSN: 1437434X     Source Type: Journal    
DOI: 10.1515/HF.2010.118     Document Type: Article

References (38)

1. Almeida, G., Brito, J.O., Perre, P. (2009) Changes in wood-water relationship due to heat treatment assessed on micro-samples of three Eucalyptus species. Holzforschung 63:80-88.
2. Barry, A.O., Koran, Z., Kaliaguine, S. (1990) Surface analysis by ESCA of sulfite post-treated CTMP. J. Appl. Polym. Sci. 39: 31-42.
3. Bhuiyan, M.T., Hirai, N., Sobue, N. (2001) Effect of intermittent heat treatment on crystallinity in wood cellulose. J. Wood Sci. 47:336-341.
4. Boonstra, M.J., Tjeerdsma, B. (2006) Chemical analysis of heat treated softwoods. Eur. J. Wood Wood Prod. 64:204-211.
5. Esteves, B., Graça, J., Pereira, H. (2008a) Extractive composition and summative chemical analysis of thermally treated eucalypt wood. Holzforschung 62:344-351.
6. Esteves, B., Velez Marques, A., Domingos, I., Pereira, H. (2008b) Heat-induced colour changes of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood. Wood Sci. Technol. 42:369-384.
7. Gerardin, P., Petric, M., Petrissans, M., Lambert, J., Ehrhrardt, J.J. (2007) Evolution of wood surface free energy after heat treatment. Polym. Degrad. Stab. 92:653-657.
8. Hakkou, M., Petrissans, M., Zoulalian, A., Gerardin, P. (2005) Investigation of wood wettability changes during heat treatment on the basis of chemical analysis. Polym. Degrad. Stab. 89:1-5.
9. Hua, X., Kaliaguine, S., Kokta, B.V., Adnot, A. (1993a) Surface analysis of explosion pulps by ESCA. Part 1. Carbon (1s) spectra and oxygen-to-carbon ratios. Wood Sci. Technol. 27:449-459.
10. Hua, X., Kaliaguine, S., Kokta, B.V., Adnot, A. (1993b) Surface analysis of explosion pulps by ESCA. Part 2. Oxygen (1s) and sulfur (2p) spectra. Wood Sci. Technol. 28:1-8.
11. Inari, G.N., Petrissans, M., Lambert, J., Ehrhardt, J.J., Gérardin, P. (2006) XPS characterization of wood chemical composition after heat-treatment. Surf. Interface Anal. 38:1336-1342.
12. Inari, G.N., Mounguengui, S., Dumarcay, S., Petrissans, M., Gerardin, P. (2007) Evidence of char formation during wood heat treatment by mild pyrolysis. Polym. Degrad. Stab. 92:997-1002.
13. Ishimaru, K., Hata, T., Bronsveld, P., Meier, D., Imamura, Y. (2007) Spectroscopic analysis of carbonization behavior of wood, cellulose and lignin. J. Mater. Sci. 42:122-129.
14. International standard (1975) ISO 3129. Wood - Sampling methods and general requirements for physical and mechanical tests.
15. International standard (1982a) ISO 4859. Wood - Determination of radial and tangential swelling.
16. International standard (1982b) ISO 4860. Wood - Determination of volumetric swelling.
17. Kamdem, D.P., Riedl, B., Adnot, A., Kaliaguine, S. (1991) ESCA spectroscopy of poly(methyl methacrylate) grafted onto wood fibers. J. Appl. Polym. Sci. 43:1901-1912.
18. Kamdem, D.P., Pizzi, A., Triboulot, M.C. (2000) Heat-treated timber: potentially toxic byproducts presence and extent of wood cell wall degradation. Eur. J. Wood Wood Prod. 58:253-257.
19. Kamdem, P., Zhang, J., Adnot, A. (2001) Identification of cupric and cuprous copper in copper naphthenate-treated wood by X-ray photoelectron spectroscopy. Holzforschung 55:16-20.
20. Kamdem, D.P., Pizzi, A., Jermannaud, A. (2002) Durability of heattreated wood. Eur. J. Wood Wood Prod. 60:1-6.
21. Kha, L.D. Studies on the Use of Natural Hybrids Between Acacia mangium and Acacia auriculiformis in Vietnam. Agricultural Publishing House, Hanoi, 2001.
22. Li, J. Wood Science. China Higher Education Press, Beijing, 2002 (in Chinese).
23. Li, J. Wood Spectroscope. Science Press, Beijing, 2003 (in Chinese).
24. Li, J., Li, B., Zhang, X., Su, R. (2001) The study of flame retardants on thermal degradation and charring process of manchurian ash lignin in the condensed phase. Polym. Degrad. Stab. 72:493-498.
25. Li, J., Li, B., Zhang, X. (2002) Comparative studies of thermal degradation between larch lignin and manchurian ash lignin. Polym. Degrad. Stab. 78:279-285.
26. Liu, F., Simonsen, J., Rials, T. (1998) Relationship of wood surface energy to surface composition. Langmuir 14:536-541.
27. Mburu, F., Dumarcay, S., Bocquet, J.F., Petrissans, M., Gerardin, P. (2008) Effect of chemical modifications caused by heat treatment on mechanical properties of Grevillea robusta wood. Polym. Degrad. Stab. 93:401-405.
28. Nzokou, P., Kamdem, D.P. (2005) X-ray photoelectron spectroscopy study of red oak- (Quercus rubra), black cherry- (Prunus serotina) and red pine- (Pinus resinosa) extracted wood surfaces. Surf. Interface Anal. 37:689-694.
29. Popescu, C.-M., Tibirna, C.-M., Vasile, C. (2009) XPS characterization of naturally aged wood. Appl. Surf. Sci. 256:1355-1360.
30. Santos, J.A. (2000) Mechanical behaviour of Eucalyptus wood modified by heat. Wood Sci. Technol. 34:39-43.
31. Sivonen, H., Maunu, S.L., Sundholm, F., Jamsa, S., Viitaniemi, P. (2002) Magnetic resonance studies of thermally modified wood. Holzforschung 56:648-654.
32. Stark, N.M., Matuana, L.M. (2004) Surface chemistry changes of weathered HDPE/wood-flour composites studied by XPS and FTIR spectroscopy. Polym. Degrad. Stab. 86:1-9.
33. Sustersic, Z., Mohareb, A., Chaouch, M., Pétrissans, M., Petric, M., Gérardin, P. (2010) Prediction of the decay resistance of heat treated wood on the basis of its elemental composition. Polym. Degrad. Stab. 95:94-97.
34. Tjeerdsma, B.F., Militz, H. (2005) Chemical changes in hydrothermal treated wood: FTIR analysis of combined hydrothermal and dry heat-treated wood. Eur. J. Wood Wood Prod. 63:102-111.
35. Tjeerdsma, B.F., Boonstra, M., Pizzi, A., Tekely, P., Militz, H. (1998) Characterisation of thermally modified wood: molecular reasons for wood performance improvement. Eur. J. WoodWood Prod. 56:149-153.
36. Tuong, V.M., Li, J. (2010) Effect of heat treatment on the change in color and dimensional stability of acacia hybrid wood. BioResources 5:1257-1267.
37. Weiland, J.J., Guyonnet, R. (2003) Study of chemical modifications and fungi degradation of thermally modified wood using DRIFT spectroscopy. Eur. J. Wood Wood Prod. 61:216-220.
38. Wikberg, H., Liisa Maunu, S. (2004) Characterisation of thermally modified hard- and softwoods by 13C CPMAS NMR. Carbohydr. Polym. 58:461-466.