Impact elastohydrodynamics in point contacts

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 225, Issue 1, 2011, Pages 1-12

  Kaneta, M ^a   Nishikawa, H ^b   Mizui, M ^a   Guo, F ^c  

^a KYUSHU KYORITSU UNIVERSITY   (Japan)

^b KYUSHU INSTITUTE OF TECHNOLOGY   (Japan)

^c QINGDAO TECHNOLOGICAL UNIVERSITY   (China)

Author keywords

elastohydrodynamic lubrication; initial impact gap; loading speed; squeeze effect; viscosity pressure coefficient

Indexed keywords

CONTACT REGIONS; CRITICAL VISCOSITY; INITIAL IMPACT GAP; INITIAL STAGES; INPUT PARAMETER; LABORATORY EXPERIMENTS; LATE STAGE; LOADING SPEED; MAXIMUM LOAD; NUMERICAL SIMULATION; OIL ENTRAPMENT; SQUEEZE EFFECT;

CONCRETE BRIDGES; ELASTOHYDRODYNAMICS; LOADING; NUMERICAL ANALYSIS; PRESSURE EFFECTS; SPEED; VISCOSITY;

ELASTOHYDRODYNAMIC LUBRICATION;

EID: 78651415670     PISSN: 13506501     EISSN: None     Source Type: Journal    
DOI: 10.1177/13506501JET838     Document Type: Conference Paper

References (31)

1. H. Christensen, 'The oil film in a closing gap' Proc. R. Soc. Lond. A 266 (1962): 312-328
2. D. Dowson, D. A. Jones, 'Lubricant entrapment between approaching elastic solids' Nature 214 (1967): 947-948
3. F. J. Westlake, A. Cameron, 'A study of ultra-thin lubricant films using an optical technique' Proc. Instn Mech. Engrs 182 3G (1967/68): 75-78 DOI: 10.1243/PIME-CONF-1967-182-187-02
4. H. Christensen, 'Elastohydrodynamic theory of spherical bodies in normal approach' ASME J. Lubr. Technol 92 (1970): 145-154
5. K. Herrebrugh, 'Elastohydrodynamic squeeze films between two cylinders in normal approach' ASME J. Lubr. Technol 92 (1970): 292-302
6. G. R. Paul, A. Cameron, 'An absolute high-pressure microviscometer based on refractive index' Proc. R. Soc. Lond. A 331 (1972): 171-185
7. K. M. Lee, H. S. Cheng, 'The pressure and deformation profiles between two normally approaching lubricated cylinders' ASME J. Lubr. Technol 95 (1973): 308-320
8. N. Kuwano, N. Ohno, F. Hirano, 'Investigation on entrapment of mineral oils under impact' J. JSLE 31 7 (1985): 477-484
9. M. M. A. Safa, R. Gohar, 'Pressure distribution under a ball impacting a thin lubricant layer' ASME J. Tribol. 108 (1986): 372-376
10. P. Yang, S. Wen, 'Pure squeeze action in an isothermal elastohydrodynamically lubricated spherical conjunction' Wear 142 (1991): 1-30
11. R. Larsson, E. Hoeglund, 'Elastohydrodynamic lubrication at impact loading' ASME J. Tribol. 116 (1994): 770-776
12. R. Larsson, E. Hoeglund, 'Numerical simulation of a ball impacting and rebounding a lubricated surface' ASME J. Tribol. 117 (1995): 94-105
13. D. Dowson, D. Wang, D. Dowson Ed., 'Impact lastohydrodynamics'
14. R. Larsson, J. Lundberg, 'Study of lubricated impact using optical interferometry' Wear 190 (1995): 184-189
15. H. Nishikawa, K. Handa, K. Teshima, K. Matsuda, M. Kaneta, 'Behavior of EHL films in cyclic squeeze motion' JSME Int. J. C 38 2 (1995): 577-585
16. F. Guo, H. Nishikawa, P. Yang, M. Kaneta, 'EHL under cyclic squeeze motion' Tribol. Int. 40 (2007): 1-9
17. A. Martini, S. Bair, 'The role of fragility in EHL entrapment' Tribol. Int. 43 (2010): 277-282
18. M. Sakamoto, H. Nishikawa, M. Kaneta, G. Dalmaz Ed., 'Behaviour of point contact EHL films under pulsating loads'
19. F. Guo, M. Kaneta, J. Wang, H. Nishikawa, P. Yang, 'Occurrence of a non-central dimple in squeezing EHL contacts' ASME J. Tribol. 128 (2006): 632-640
20. M. Kaneta, S. Ozaki, H. Nishikawa, F. Guo, 'Effects of impact loads on point contact elastohydrodynamic lubrication films' Proc. IMechE, Part J: J. Engineering Tribology 221 (2007): 271-278 DOI: 10.1243/13506501JET236
21. H. Nishikawa, H. Miyazaki, M. Kaneta, F. Guo, 'Effects of two-stage impact load on point contact elastohydrodynamic lubrication films' Proc. IMechE., Part J: J. Engineering Tribology 222 (2008): 807-814 DOI: 10.1243/13506501JET389
22. Y. H. Wijnant, C. H. Venner, D. Dowson Ed., 'Analysis of an EHL circular contact incorporating rolling element vibration'
23. Y. H. Wijnant, C. H. Venner, R. Larsson, P. Eriksson, 'Effects of structual vibrations on the film thickness in an EHL circular contact' ASME J. Tribol. 121 (1999): 259-264
24. C. A. Foord, L. D. Wedeven, F. J. Westlake, A. Cameron, 'Optical elastohydrodynamics' Proc. Instn Mech. Engrs 184 28 (1969/70): 487-505 DOI: 10.1243/PIME-PROC-1969-184-041-02
25. D. Dowson, G. R. Higginson, Elastohydrodynamic lubrication (Oxford: Pergamon 1996): 236-
26. R. Larsson, P. O. Larsson, E. Eriksson, M. Sjoeberg, E. Hoeglund, 'Lubricant properties for input to hydrodynamic and elastohydrodynamic lubrication analyses' Proc. IMechE, Part J: J. Engineering Tribology 214 (2000): 17-27 DOI: 10.1243/1350650001542981
27. C. J. A. Roelands, J. C. Vulgter, H. I. Waltermann, 'The viscosity temperature pressure relationship of lubrication oils and its correlation with chemical constitution' ASME J. Basic Eng. 85 (1963): 601-607
28. S. Bair, 'Measurements of real non-newtonian response for liquid lubricants under moderate pressures' Proc. IMechE, Part J: J. Engineering Tribology 215 (2001): 223-233 DOI: 10.1243/1350650011543493
29. C. H. Venner, A. A. Lubrecht, Multilevel methods in lubrication (Amsterdam: Elsevier 2000): 179-221
30. C. H. Venner, 'EHL film thickness computations at low speeds: risk of artificial trends as a result of poor accuracy and implications for mixed lubrication modeling' Proc. IMechE, Part J: J. Engineering Tribology 219 (2005): 285-290 DOI: 10.1243/135065005X33928
31. N. Ohno, F. Hirano, 'High pressure Rheology analysis of traction oils based on free volume measurements' Lubr. Eng. J. STLE 57 7 (2001): 16-22 (Pubitemid 32680262)