Reduction of the linting and dusting propensity of newspaper using starch and microfibrillated cellulose

Nordic Pulp and Paper Research Journal

Volumn 25, Issue 4, 2010, Pages 495-504

  Song, Hainong ^a   Ankerfors, Mikael ^b   Hoc, Miroslav ^b   Lindström, Tom ^b  

^a GUANGXI UNIVERSITY   (China)

^b INNVENTIA AB   (Sweden)

Author keywords

Anionic starch; Cationic starch; Dry strength; Dusting; Innventia linting propensity tester; Linting; Microfibrillated cellulose; Nanocellulose; Newsprint; Offset printing; Surface sizing; Surface treatment

Indexed keywords

ADDITIVES; CELLULOSE; HEALTH HAZARDS; MIXTURES; NANOCELLULOSE; NEWSPRINT; OFFSET PRINTING; SURFACE TREATMENT; THERMOMECHANICAL PULP; THERMOMECHANICAL PULPING PROCESS;

ANIONIC STARCH; CATIONIC STARCHES; DRY STRENGTHS; DUSTING; INNVENTIA LINTING PROPENSITY TESTER; LINTING; MICROFIBRILLATED CELLULOSE; SURFACE SIZINGS;

STARCH;

CELLULOSE; DELAMINATION; DYES; FIBRILLATION; HEALTH; LINTING; LITHOGRAPHY; NEWSPAPERS; NEWSPRINT; OFFSET PRINTING; PRINTING BLANKETS; RISK ASSESSMENT; STARCH; SURFACE TREATMENT; THERMOMECHANICAL PULPS;

EID: 78651392003     PISSN: 02832631     EISSN: None     Source Type: Journal    
DOI: 10.3183/npprj-2010-25-04-p495-504     Document Type: Article

References (37)

1. Ajersch, M., Poirer, N. and Pikulik, I. (2004): Effects of sheet moisture on film sizing, J. Pulp Paper Sci. 30(2), 53-57.
2. Amiri, R., Begin, B., Deshaies, S. and Mozaffari, S. (2004): Effects of wood and pulp quality on linting propensity, Pulp Paper Can. 105(6), 23-29.
3. Aspler, J. (2003): Linting and surface contamination: Current status of newsprint and uncoated papers, Taga Proceedings 2008:55th Annual Conference, Montreal, Canada, 375-398.
4. Aspler, J. S. and Beland, B.-C. (1994): A review of fibre rising and surface roughening effects in paper, J. Pulp Paper Sci. 20(1), J27-J32.
5. Beaulieu, S. and Shallhorn, P. (1993): Strategies to minimize ray cell linting, 18th International Mechanical Pulping Conference, Oslo, Norway, 309-323.
6. Gratton, F. P. (2008): Predicting lint propensity of paper at the mill: a test that works, Pulp Paper Can. 109(1), 3442.
7. Hansson, J. A. and Klass, C. P. (1983): High speed surface sizing, TAPPI Papermakers Conf., TAPPI Press, Atlanta, 49-54.
8. Heintze, H. U. (2006): Offset lint testing: An overview of printing options and issues, Pulp Paper Can. 107(2), 30-33.
9. Henriksson, M., Berglund, L. A., Isaksson, P., Lindström, T. and Nishino, T. (2008): Cellulose nanopaper structures of high toughness, Biomacromolecules 9(6), 1579-1585.
10. Hoc, M. (2000): The phenomenon of linting in newsprint printing, IFRA Special report 1.19.
11. Hoc, M. (2009): Dynamic evaluation of lint build-up during newspaper production, 36th International Research Conference of iarigai, Stockholm, Sweden, International Association of Research Organizations for the Information, 287-294.
12. IFRA Newsprint Committee (1993): Printing and print quality, printing processes interaction effects, In: IFRA Newsprint and Newslink Guide, Quervel, P.-L and Ruokosou, N. (ed.), IFRA, Dannstadt, Germany.
13. Ionides, G. (1984): The linting tendency of newsprint - A gênerai review, Paperi Puu 66(4), 298-306.
14. Iwasa, S. (2002): A new surface sizing agent for offset newsprint, Paper Technol. 43(3), 31-37.
15. Karnis, A. (1995): Effect of wood species and process on the linting propensity and surface roughening of mechanical pulps, J. Pulp Paper Sci. 21(9), J321-J329.
16. Klass, C. P. (1998): Value added groundwood grades offer alternative for heatset offset printing, Pulp and Paper 72(3), 71-77.
17. Lindem, P. and Moller, K. (1992): The "Dagbladet" full-scale printing trials: Linting in four colour offset printing, 1992 International Printing and Graphic Arts Conference, TAPPI Proceedings, TAPPI Press, Atlanta, 141-163.
18. Mangin, P. J. (1987): A review of offset linting evaluation, TAGA Proceedings, Rochester, USA, 397-442.
19. Mangin, P. J. (1990): Offset linting studies: Part I - A critical review of the effect of printing parameters on the linting propensity of paper, 76th Annual Meeting of the technical Section, Canadian Pulp and Paper Association, 143-154.
20. Mangin, P. J. (1991): Offset linting studies. Part 1-A critical review of the effect of printing parameters on the linting propensity of paper, J. Pulp Paper Sci. 17(5), J156-J163.
21. Mangin, P. J., Aspler, J. S. and de Grâce, J. H. (1985): A papermaker's approach to the analysis paper printing characteristics, TAGA Proceedings, Rochester, USA, 359-381.
22. Mangin, P. J. and Silvy, J. (1993): Pulp and paper properties affecting the linting propensity of paper, TAGA Proceedings, 254-277.
23. Mangin, P. J., Silvy, J. and Grace, J. H. (1990): Offset linting studies: Part II. Further contribution to linting theories, 5th International Printing Graphic Arts Conference, Vancouver, B.C., 109-119.
24. Möller, K., Thomassen, B., Weidemmuller, J., Menzel, P., Walther, K., Falter, K., Spöring, G., Meissner, M. and Axell, O. (1995): Factors influencing linting in offset printing of newsprint, 49th APPITA Annual General Conference, Hobart, Australia, 115-121.
25. Naydowski, C., Burri, P. and Laufmann, M. (1997): Oberflä chenveredelung von Naturpapieren, Wochenblatt fuer Papierfabrikation 125(8), 410-415.
26. Perry, G. (1995): Newsprint size press operation at Howe Pound Pulp and Paper Limited, Pulp Paper Can. 96(12), 116-118.
27. Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O. and Lindström, T. (2007): Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels, Biomacromolecules 8(6), 1934-1941.
28. Sauret, G., Trinh, H. J. and Lefebvre, G. (1969): Versuche zur Herstelltung Mehrlagiger Industriekartons im Laboratorium, Das Papier 23(1), 8-12.
29. Turbak, A. F., Snyder, F. W. and Sandberg, K. R. (1983): Microfibrillated cellulose, a new cellulose product: Properties, uses and commercial potential, Journal of Applied Polymer Science, Applied Polymer Symposia 37, 815-827.
30. Waech, T. G. (1992): Offset lint testing by image analysis, Pulp Paper Can. 92, T257-T262.
31. Wood, J., Zhang, X., Chagaev, O., Stationwala, M., Goel, K., Shallhorn, P. M. and Beaulieu, S. (2000): The effect of various mechanical and chemical treatment of ray cells on sheet properties and linting, Pulp Paper Can. 101(10), T307-T310.
32. Wood, J., Zhang, X., Chagaev, O., Stationwala, M., Goel, K., Shallhorn, P. M. and Beaulieu, S. (2001): The effect of various mechanical and chemical treatment of ray cells on sheet properties and linting, Int. Mechanical Pulping Conf. PAPTAC.
33. Wood, J. R., Imada, S. E., Beaulieu, S. and Kerr, R. B. (1995): Reduction of offset linting-A comparison of six mills part II. Wood furnish, pulp and paper machine effects, Pulp & Paper Canada 96(11), T368-T372.
34. Wood, J. R. and Karnis, A. (1977): Towards a lint free newsprint sheet, Paperi Puu (10), 660-674.
35. Wood, J. R. and Karnis, A. (1992): Linting propensity of mechanical pulps, Pulp and Paper 93(7), T191-T198.
36. Wågberg, L., Decher, G., Norgren, M., Lindström, T., Ankerfors, M. and Axnäs, K. (2008): The build-up of polyelectrolyte multilayers of microfibrillated cellulose and cationic polyelectrolytes, Langmuir 24(3), 784-795.
37. Åkesson, R. and Bergh, N. O. (1988): The production of high quality upgraded newsprint by an on-machine surface treatment with LAS (Liquid Application System), 23rd EUCEPA Symposium, Harrogate, UK, 536-555.