Experimental research on mechanical performance of hybrid fiber reinforced cementitious composites with polyvinyl alcohol short fiber and carbon textile

Journal of Composite Materials

Volumn 45, Issue 1, 2011, Pages 5-28

  Li, Qinhua ^a   Xu, Shilang ^a  

^a ZHEJIANG UNIVERSITY   (China)

Author keywords

bond; carbon textile; crack control; hybrid fiber reinforced cementitious composites; MOR

Indexed keywords

BINDER RATIO; BOND; BOND PROPERTIES; CEMENTITIOUS COMPOSITES; CONCRETE STRUCTURES; CRACK CONTROL; CRACKING CONTROL; CRACKING RESPONSE; EXPERIMENTAL RESEARCH; FOUR-POINT BENDING; GRAIN SIZE; HIGH TOUGHNESS; HYBRID FIBER; LOAD-BEARING CAPACITY; MATERIAL BEHAVIOR; MATRIX; MECHANICAL PERFORMANCE; MOR; PULL-OUT TEST; PVA FIBER; REINFORCED MORTAR; SHORT FIBER; TEXTILE REINFORCED CONCRETES; VOLUME CONTENT;

BEARING CAPACITY; BEARINGS (STRUCTURAL); BENDING TESTS; CRACKS; EPOXY RESINS; FIBERS; MATERIALS PROPERTIES; REINFORCED CONCRETE; RESINS; SURFACE TREATMENT; TEXTILES; WATER CONTENT;

CARBON FIBERS;

EID: 78651370615     PISSN: 00219983     EISSN: 1530793X     Source Type: Journal    
DOI: 10.1177/0021998310371529     Document Type: Article

References (39)

1. Chen, Z.Y., Xu, Y.L. and Qian, J.R. (2002). Safety and Durability of Structural Works in Civil Engineering, Archit. Technol. (in Chinese), 33 (4). 248-253.
2. Xu, S.L. (2007). Research Report on Ultra-high Toughness Green ECC and its Application, pp. 1-310, Dalian University of Technology, Dalian, China (in Chinese).
3. Li, V.C. (1998). Engineered Cementitious Composites - Tailored Composites Through Micromechanical Modeling, In: Banthia et al. (eds), Fiber Reinforced Concrete: Present and the Future, pp. 64-97, Canadian Society for Civil Engineering, Montreal, Canada.
4. Li, V.C. (2003). On Engineered Cementitious Composites (ECC) - A Review of the Material and its Applications, J. Adv. Concr. Technol, 1 (3). 215-230.
5. Li, V.C., Wang, S. and Wu, C. (2001). Tensile Strain-Hardening Behavior of PVA-ECC, ACI Mater. J., 98 (6). 483-492.
6. Li, V.C. and Kanda, T. (1998). Engineered Cementitious Composites for Structural Applications, ASCE J. Mater. Civ. Eng., 10 (2). 66-69.
7. Li, V.C. (2002). Advances in ECC Research, In: Palaguru, P., Naaman, A., Weiss, W. (eds), ACI Special Publication on Concrete: Material Science to Applications, Vol. SP206-23, pp. 373-400, American Concrete Institute, Farmington Hill, Michigan.
8. Li, Q.H. and Xu, S.L. (2009). Four Point Bending Experimental Investigation on Reinforced Ultra High Toughness Cementitious Composite Beams, Key. Eng. Mater., 400-402: 395-401.
9. Xu, S.L. and Li, Q.H. (2009). Theoretical Analysis on Bending Behavior of Functionally Graded Composite Beam Crack-controlled by Ultrahigh Toughness Cementitious Composites, Sci. China Ser. E: Technol. Sci., 52 (2). 363-378.
10. Li, Q.H. and Xu, S.L. (2009). Experimental Investigation and Analysis on Bending Behavior of Functionally Graded Composite Beam Crack-controlled by Ultrahigh Toughness Cementitious Composites, Sci. China Ser. E: Technol. Sci., 52 (6). 1648-1664.
11. Curbach, M. and Jesse, F. (2005). Verstärken von Stahlbetonbauteilen mit Textilbewehrtem Beton-Kurzer Bericht zu Aktuellen Entwicklungen, Beton-und Stahlbetonbau, 100 (S1). 78-81.
12. Peled, A., Bentur, A. and Yankelevsky, D. (1998). Effects of Woven Fabrics Geometry on the Bonding Performance of Cementitious Composites Mechanical Performance, Adv. Cem. Based Mater., 7: 20-27.
13. Haußler-Combe, U. and Hartig, J. (2007). Bond and Failure Mechanisms of Textile Reinforced Concrete (TRC) Under Uniaxial Tensile Loading, Cem. Concr. Comp., 29: 279-289.
14. Naaman, A.E., Shah, S.P., Throne, J.L. (1984). Some Developments of Polypropylene Fibers for Concrete, In: Hoff, G.C. (ed.), Fiber-reinforced Concrete - International Symposium, Vol. SP-81, pp. 375-396, American Concrete Institute, Detroit, MI, USA.
15. Triantafillou, T.C., Papanicolaou, C.G. (2005). Textile Reinforced Mortars (TRM) Versus Fiber Reinforced Polymers (FRP) as Strengthening Materials of Concrete Structures, In: Shield, C.K., Busel, J.P., Walkup, S.L. and Gremel, D.D (eds), 7th International Symposium on Fiber-Reinforced Polymer (FRP) Reinforcement for Concrete Structures, Vol. SP-230, p. 1708, American Concrete Institute, Kansas City, MI, USA.
16. Hanisch, V., Kolkmann, A., Roye, A. and Gries, T. (2006). Yarn and Textile Structures for Concrete Reinforcements, In: Proceedings FERRO8, Bangkok, 6 February.
17. Hegger, J. and Voss, S. (2008). Investigations on the Bearing Behaviour and Application Potential of Textile Reinforced Concrete, Eng. Struct., 30: 2050-2056.
18. Jesse, F., Will, N., Curbach, M. and Hegger, J. (2008). Loading-bearing Behavior of Textile-reinforced Concrete, In: Dubey, A. (ed.), Textile-Reinforced Concrete. Proceedings of ACI Fall Convention, Kansas City, November 2005, SP-250, pp. 59-68.
19. Atcheson, M., Alexander, D. (1978). Development of Fibrous Ferrocement, In: Ferrocement: Material and Applications, Vol. SP-61, pp. 81-101, American Concrete Institute, Detroit, USA.
20. El Debs, M.K. and Naaman, A.E. (1995). Bending Behavior of Mortar Reinforced with Steel Meshes and Polymeric Fibers, Cem. Concr. Compos., 17 (4). 327-338.
21. Swamy, R.N. and Spanos, A. (1985). Deflection and Cracking Behavior of Ferrocement With Grouped Reinforcement and Fiber Reinforced Matrix, ACI J., 82(1): 79-91.
22. Naaman, A.E. (2003). Progress in Ferrocement and Hybrid Textile Composites, In: Kurbach M. (ed.), Proceedings of Colloquium on Textile Reinforced Concrete - CTRC2, Dresden University, Germany.
23. Naaman, A.E. and Guerrero, P. (1996). Bending Behavior of Thin Cement Composites Reinforced with FRP Meshes, In: Saadatmanesh H. and Ehsani M. (eds), Proceedings of First International Conference on Fiber Composites in Infrastructures, ICCI 96, University of Arizona, Tucson, pp. 178-189.
24. Naaman, A.E. (2000). Ferrocement and Laminated Cementitious Composites, Techno Press 3000, Ann Arbor, Michigan ( www.technopress3000.com ).
25. Naaman, A.E. and Chandrangsu, K. (2000). Bending Behavior of Laminated Cementitious Composites Reinforced with FRP Meshes, In: Peled A., Shah, S.P. and Banthia, N. (eds), Proceedings of ACI Symposium on High Performance Fiber-reinforced Concrete Thin Sheet Products, American Concrete Institute, Farmington Hills, MI, USA, ACI SP 190, pp. 97-116.
26. Wang, S., Naaman, A.E. and Li, V.C. (2001). Bending Response of Hybrid Ferrocemnt Plates With Meshes and Fibers, In: Proceedings of the 7th International Symposium on Ferrocement and Thin Reinforced Cement Composites, Singapore, pp. 247-260.
27. Reinhardt, H.W. and Krüger, M. (2001). Vorgespannte Dünne Platten aus Textilbeton, In: Heggerm Aachen, J. (ed.), Proceedings of Textilbeton-l. Fac-kolloquium der Sonderforschungsbereiche 528 und 532, RWTH Aachen University, Aachen, pp. 165-174.
28. Dilthey, U., Schleser, M. (2005). Improvement of Textile Reinforced Concrete by Use of Polymers, In: E-MRS Fall Meeting 2005 - Symposium G, Adhesion on macro-, micro- and nano-scale, Warsaw University of Technology, Poland, 5-9 September.
29. Raupach, M., Orlowsky, J., Büttner, T. and Keil, A. (2006). Recent Developments of the Usage of Polymers in Textile Reinforced Concrete, In: Proceedings 5th Asian Symposium on Polymers in Concrete, Taramani, India, 11-12 September, pp. 53-60.
30. Raupach, M. and Keil, A. (2007). Improvement of the Load-bearing Capacity of Textile Reinforced Concrete by the use of Polymers, In: Proceedings of Ohama Symposium, 12th International Congress on Polymers in Concrete ICPIC'07, Chuncheon, Korea, 27-28 September, pp. 873-881.
31. Konrad, M., Chudoba, R., Meskouris, K. and Mombartz, M. (2003). Numerical Simulation of Yarn and Bond Behavior at Micro- and Meso-Level, In: Proceedings of the 2nd Colloquium on Textile Reinforced Structures, Dresden, Germany, Technische Universität Dresden, Sonderforschungsbereich 528, Manfred Curbach, pp. 399-410.
32. Xu, S.L., Krüger, M., Reinhardt, H.W. and Ožbbolt, J. (2004). Bond Characteristics of Carbon, Alkali-resistant Glass and Aramid Textiles in Mortar, ASCE J. Mater. Civ. Eng., 16 (4). 356-364.
33. Krüger, M., Reinhardt, H.W., Fichtlscherer, M. (2002). Bond Behavior of Textile Reinforcement in Reinforced and Prestressed Concrete, 4th International Ph.D. Symposium in Civil Engineering, pp. 373-381, München, Germany.
34. Xu, S.L., Reinhardt, H.W., Krüger, M. and Ožbbolt, J. (2002). Study on Bond Property Between High Performance Fine Concrete and Carbon Fiber Textile, In: 11th National Conference on Structural Engineering, The Supplement of Engineering Mechanics, (in Chinese), Changsha, China, pp. 95-104.
35. Reinhardt, H.W., Krüger, M. and Große, C.U. (2003). Concrete Prestressed with Textile Fabric, J. Adv. Concr. Technol., 1 (3). 231-239.
36. Hartig, J., Haußler-Combe, U. and Schicktanz, K. (2008). Influence of Bond Properties on the Tensile Behaviour of Textile Reinforced Concrete, Cem. Concr. Compos., 30: 898-906.
37. Peled, A., Bentur, A. and Yankelevsky, D. (1999). Flexural Performance of Cementitious Composites Reinforced with Woven Fabrics, J. Mater. Civ. Eng., 11: 325-330.
38. Guo, Z.H. (1999). Reinforced Concrete Theory, Tsinghua University Press, China.
39. Li, H. (2006). Analysis and Experimental Study on Textile Reinforced Concrete Elements, PhD Thesis, Dalian University of Technology, Dalian, China, (in Chinese).