Analysis of deformation induced martensitic transformation in stainless steels

Materials Science and Technology

Volumn 27, Issue 1, 2011, Pages 366-370

  Das, A ^a,b,c   Chakraborti, P C ^b   Tarafder, S ^a   Bhadeshia, H K D H ^c  

^a NATIONAL METALLURGICAL LABORATORY   (India)

^b JADAVPUR UNIVERSITY   (India)

^c UNIVERSITY OF CAMBRIDGE   (United Kingdom)

Author keywords

Austenitic stainless steels; Martensite; Strain induced transformation; Stress induced transformation

Indexed keywords

APPLIED STRESS; MECHANICAL DRIVING; PLASTIC STRAIN; STRAIN INDUCED TRANSFORMATION; STRESS INDUCED TRANSFORMATION; STRESS-INDUCED; TENSILE DEFORMATION; THERMODYNAMIC EFFECT;

AUSTENITE; AUSTENITIC STAINLESS STEEL; AUSTENITIC TRANSFORMATIONS; CORROSION RESISTANT ALLOYS; MARTENSITE; MARTENSITIC STAINLESS STEEL; PLASTIC DEFORMATION; STRESSES;

MARTENSITIC TRANSFORMATIONS;

EID: 78650830113     PISSN: 02670836     EISSN: 17432847     Source Type: Journal    
DOI: 10.1179/026708310X12668415534008     Document Type: Article

References (57)

1. J. R. Patel and M. Cohen: 'Criterion for the action of applied stress in the martensitic transformation', Acta Metall., 1953, 1, 531-538.
2. G. B. Olson and M. Cohen: 'Kinetics of strain-induced martensitic transformation', Metall. Trans. A, 1975, 6A, 791-795.
3. G. B. Olson: 'Transformation plasticity and the stability of plastic flow', in 'Deformation, processing and structure', 390-424; 1982, Metals Park, OH, American Society for Metals.
4. H. K. D. H. Bhadeshia: 'An aspect of the nucleation of ''burst'' martensite in steels', J. Mater. Sci., 1982, 17, 383-386.
5. M. Mukherjee, S. B. Singh and O. N. Mohanty: 'Deformationinduced transformation of retained austenite in transformation induced plasticity-aided steels: a thermodynamic model', Metall. Mater. Trans. A, 2008, 39A, 2319-2328.
6. J. C. Bokros and E. R. Parker: 'The mechanism of the martensite burst transformation in Fe-Ni single crystals', Acta Metall., 1963, 11, 1291-1301.
7. A. A. Shirzadi, H. Abreu, L. Pocock, D. Klobcar, P. J. Withers and H. K. D. H. Bhadeshia: 'Bainite orientation in plastically deformed austenite', Int. J. Mater. Res., 2009, 100, 40-45.
8. I. Tamura: 'Deformation induced martensitic transformation and transformation-induced plasticity in steels', Met. Sci., 1982, 16, 245-254.
9. S. Kundu and H. K. D. H. Bhadeshia: 'Transformation texture in deformed stainless steel', Scr. Mater., 2006, 55, 779-781.
10. S. Chatterjee and H. K. D. H. Bhadeshia: 'TRIP-assisted steels: stress or strain-affected martensitic transformation', Mater. Sci. Technol., 2007, 23, 1101-1104.
11. E. S. Perdahcioǧlu, H. J. M. Geijselaers and M. Groen: 'Influence of plastic strain on deformation-induced martensitic transformations', Scr. Mater., 2008, 58, 947-950.
12. H. J. M. Geijselaers and E. S. Perdahcioglu: 'Mechanically induced martensitic transformation as a stress-driven process', Scr. Mater., 2009, 60, 29-31.
13. T. Angel: 'Formation of martensite in austenitic stainless steel', J. Iron Steel Inst., 1954, 181, 165-174.
14. S. S. Hecker, M. G. Stout, K. P. Staudhammer and J. L. Smith: 'Effects of strain state and strain rate on deformation-induced transformation in 304 stainless steel. Part I - magnetic measurements and mechanical behaviour', Metall. Mater. Trans. A, 1982, 13A, 619-626.
15. S. K. Varma, J. Kalyanam, L. E. Murr and V. Srinivas: 'Effect of grain size on deformation-induced martensite formation in 304 and 316 stainless steels during room temperature tensile testing', J. Mater. Sci. Lett., 1994, 13, 107-111.
16. A. K. Raj and K. A. Padmanabhan: 'Room-temperature plastic flow and strain-induced martensitic transformation in 1?2 wt-%Ni metastable austenitic stainless steel sheets', J. Mater. Sci. Lett., 1997, 16, 1920-1924.
17. S. F. Peterson, M. C. Mataya and D. K. Matlock: 'The formability of austenitic stainless steels', J. Miner. Met. Mater., 1997, 49, 54-58.
18. R. H. Wagoner and J. K. Lee: 'Formability of stainless steel', Metall. Mater. Trans. A, 1998, 29A, 2161-2172.
19. J. Talonen, P. Nenonen, G. Pape and H. Hanninen: 'Effect of strain rate on the strain-induced martensite transformation and mechanical properties of austenitic stainless steels', Metall. Mater. Trans. A, 2005, 36A, 421-432.
20. A. K. De, D. C. Murdock, M. C. Mataya, J. G. Speer and D. Matlock: 'Quantitative measurement of deformation-induced martensite in 304 stainless steel by X-ray diffraction', Scr. Mater., 2004, 12, 1445-1449.
21. A. K. De, J. G. Speer, D. Matlock, D. C. Murdock, M. C. Mataya and R. J. Comstock, Jr: 'Deformation-induced phase transformation and strain hardening in type 304 austenitic stainless steel', Metall. Mater. Trans. A, 2006, 37A, 1875-1886.
22. J. Talonen: 'Effect of strain-induced a9-martensite transformation on mechanical properties of metastable austenitic stainless steels', PhD thesis, Helsinki University of Technology, Espoo, Finland, 2007.
23. C. Muller-Bollenhagen, M. Zimmermann and H.-J. Christ: 'Very high cycle fatigue behaviour of austenitic stainless steel and the effect of strain-induced martensite', Int. J. Fatigue, 2010, 32, 936-942.
24. P. Hedström: 'Deformation induced martensitic transformation of metastable stainless steel', PhD thesis, Lulea University of Technology, Lulea, Sweden, 2005.
25. L. Zhang, S. Takahashi, Y. Kamada, H. Kikuchi, K. Ara, M. Sato and T. Tsukada: 'Magnetic properties of SUS 304 austenitic stainless steel after tensile deformation at elevated temperatures', J. Mater. Sci. Lett., 2005, 40, 2709-2711.
26. J. A. Lichtenfeld, M. C. Mataya and C. J. Van Tyne: 'Effect of strain rate on stress-strain behaviour of alloy 309 and 304l austenitic stainless steel', Metall. Mater. Trans. A, 2006, 37A, 147-161.
27. P. Hedstrom, L. E. Lindgren, J. Almer, U. Lienert, J. Bernier, M. Terner and M. Oden: 'Load partitioning and strain-induced martensite formation during tensile loading of a metastable austenitic stainless steel', Metall. Mater. Trans. A, 2009, 40A, 1039-1048.
28. F. B. Pickering: 'Physical metallurgical development of stainless steels', in 'Stainless steels', 2-28; 1985, London, The Institute of Metals.
29. S. Denis, E. Gautier, A. Simon and G. Beck: 'Stress-phasetransformation interactions - basic principles, modelling and calculation of internal stresses', Mater. Sci. Technol., 1985, 1, 805-814.
30. NPL: MTDATA Software, National Physical Laboratory, Teddington, UK, 2006.
31. D. P. Koistinen and R. E. Marburger: 'A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels', Acta Metall., 1959, 7, 59-60.
32. E. S. Machlin and M. Cohen: 'Burst phenomenon in the martensitic transformation', Trans. Metall. Soc. AIME, 1951, 191, 746-754.
33. H. C. Fiedler, B. L. Averbach and M. Cohen: 'The effect of deformation on the martensitic transformation', Trans. Am. Soc. Met., 1955, 47, 267-290.
34. W. C. Leslie and R. L. Miller: 'The stabilization of austenite by closely spaced boundaries', ASM Trans. Q., 1964, 57, 972-979.
35. J. R. Strife, M. J. Carr, and G. S. Ansell: 'Effect of austenite prestrain above the Md temperature on the Ms temperature in Fe- Ni-Cr-C alloys', Metall. Trans. A, 1977, 8A, 1471-1484.
36. K. Tsuzaki, S. Fukasaku, Y. Tomota and T. Maki: 'Effect of prior deformation of austenite on the gamma-epsilon martensitic transformation in Fe-Mn alloys', Trans. JIM, 1991, 32, 222-228.
37. V. Raghavan: 'Kinetics of martensitic transformations', 197-226; 1992, Metals, OH, ASM International.
38. H. K. D. H. Bhadeshia: 'The bainite transformation: Unresolved issues', Mater. Sci. Eng. A, 1999, A273-A275, 58-66.
39. S. Chatterjee, H. S. Wang, J. R. Yang and H. K. D. H. Bhadeshia: 'Mechanical stabilisation of austenite', Mater. Sci. Technol., 2006,22, 641-644.
40. M. Maalekian, E. Kozeschnik, S. Chatterjee and H. K. D. H. Bhadeshia: 'Mechanical stabilisation of eutectoid steel', Mater. Sci. Technol., 2007, 23, 610-612.
41. H. S. Yang and H. K. D. H. Bhadeshia: 'Austenite grain size and the martensite-start temperature', Scr. Mater., 2009, 60, 493-495.
42. D. J. C. MacKay: 'Practical Bayesian framework of backpropagation networks', Neural Comput., 1992, 4, 448-472.
43. D. J. C. MacKay: 'Bayesian interpolation', Neural Comput., 1992, 4, 415-447.
44. D. J. C. MacKay: 'Bayesian non-linear modelling for the energy prediction competition', ASHRAE Trans., 1994, 100, 1053-1062.
45. H. K. D. H. Bhadeshia: 'Some phase transformations in steels', Mater. Sci. Technol., 1999, 15, 22-29.
46. H. K. D. H. Bhadeshia: 'Neural networks and information in materials science', Stat. Anal. Data Min., 2009, 1, 296-305.
47. V. Seetharaman and R. Krishnan: 'Influence of the martensitic transformation on the deformation behaviour of an AISI 316 stainless steel at low temperatures', J. Mater. Sci., 1981, 16, 523-530.
48. M. Botshekan, S. Degallaix, Y. Desplanques and J. Polak: 'Tensile and LCF properties of AISI 316LN SS at 300 and 77 K', Fatigue Fract. Eng. Mater. Struct., 1998, 21, 651-660.
49. A. A. Lebedev and V. V. Kosarchuk: 'Influence of phase transformations on the mechanical properties of austenitic stainless steels', Int. J. Plast., 2000, 16, 749-767.
50. V. Talyan, R. H. Wagoner and J. K. Lee: 'Formability of stainless steel', Metall. Mater. Trans. A, 1998, 29A, 2161-2172.
51. E. Nagy, V. Mertinger, F. Tranta and J. Solyom: 'Deformation induced martensitic transformation in stainless steels', Mater. Sci. Eng. A, 2004, A378, 308-313.
52. K. Spencer, J. D. Embury, K. T. Conlon, M. Veron and Y. Brechet: 'Strengthening via the formation of strain-induced martensite in stainless steels', Mater. Sci. Eng. A, 2004, A387-A389, 873-881.
53. H. N. Han, C. G. Lee, C.-S. Oh, T.-H. Lee and S.-J. Kim: 'A model for deformation behaviour and mechanically induced martensitic transformation of metastable austenitic steel', Acta Mater., 2004, 52, 5203-5214.
54. X. Chen, Y. Wang, M. Gong and Y. Xia: 'Dynamic behavior of SUS304 stainless steel at elevated temperatures', J. Mater. Sci., 2004, 39, 4869-4875.
55. B. Petit, N. Gey, M. Cherkaoui, B. Bolle and M. Humbert: 'Deformation behavior and microstructure/texture evolution of an annealed 304 AISI stainless steel sheet', Int. J. Plast., 2007, 23, 323-341.
56. V. Mertinger, E. Nagy, F. Tranta and J. Solyom: 'Strain-induced martensitic transformation in textured austenitic stainless steels', Mater. Sci. Eng. A, 2008, A481-A482, 718-722.
57. S. Nanga, A. Pineau, B. Tanguy and P.-O. Santacreu: 'Strain induced martensitic transformations in two austenitic stainless steels: macro-micro behaviour', Proc. 17th Eur. Conf. on 'Fracture', (ed. J. Pokluda and P. Lucaš); 2008, Brno, Brno University of Technology.