Investigation of effectiveness of some vibration-based techniques in early detection of real-time fatigue failure in gears

Shock and Vibration

Volumn 17, Issue 6, 2010, Pages 741-757

  Ozturk, Hasan ^a   Yesilyurt, Isa ^b   Sabuncu, Mustafa ^a  

^a DOKUZ EYLUL UNIVERSITY   (Turkey)

^b USAK UNIVERSITY   (Turkey)

Author keywords

cepstrum; continuous wavelet transform; gear vibration; Real time gear fatigue

Indexed keywords

CRACK DETECTION; DEBRIS; FATIGUE CRACK PROPAGATION; FATIGUE DAMAGE; FREQUENCY DOMAIN ANALYSIS; GEARS; VIBRATION ANALYSIS; WAVELET TRANSFORMS;

BENDING FATIGUE; CEPSTRUM; COMPLETE TOOTH; CONTINUOUS WAVELET TRANSFORM; DIAGNOSTIC CAPABILITIES; EARLY DETECTION; FATIGUE CRACKS; FATIGUE FAILURES; FAULT FEATURE; GEAR VIBRATION; LOADING CONDITION; REAL TIME; TIME AND FREQUENCY DOMAINS; TRANSMITTING CAPACITIES;

TIME DOMAIN ANALYSIS;

EID: 78650820642     PISSN: 10709622     EISSN: None     Source Type: Journal    
DOI: 10.3233/SAV-2010-0518     Document Type: Article

References (49)

1. R.K. Mobley, An Introduction to Predictive Maintenance, Butterworth Heinemann, 2002.
2. E.B. Boyer, Failure Analysis and Prevention, Metal Handbook, American Society for Metals, Ohia, 1975.
3. J.K. Smith, Gear noise and vibration, Marcel Dekker Inc, New York, 2003.
4. M.F. White, Simulation and analysis of machinery fault signals, Journal of Sound and Vibration 93(1) (1984), 95-116.
5. R.B. Randall, A new method of modelling gear faults, ASME, Journal of Mechanical Design 104 (1981), 259-267.
6. P.D. McFadden, Examination of a technique for the early detection of failure in gears by signal processing of the time domain average of the meshing vibration, Mechanical Systems and Signal Processing 1(2) (1987), 173-183.
7. D.M Blunt and J.A. Keller, Detection of a fatigue crack in a UH-60A planet gear carrier using vibration analysis, Mechanical Systems and Signal Processing 20 (2006), 2095-2111.
8. W. Wang, Early detection of gear tooth cracking using the resonance demodulation technique, Mechanical Systems and Signal Processing 15(5) (2001), 887-903.
9. P.D. McFadden, Detecting fatigue cracks in gears by amplitude and phase demodulation of the meshing vibration, ASME, Journal of Vibration, Acoustics, Stress, and Reliability in Design 108 (1986), 165-170.
10. J.E Nicks and G. Krishnappa, Gear fault detection using modulation analysis technique, Proceedings of the Second International Conference on Gearbox Noise, Vibration, and Diagnostics, Institute of Mechanical Engineers, UK,1995, pp. 81-89.
11. G. Dalpiaz, A, Rivola and R. Rubini, Effectiveness and sensitivity of vibration processing techniques for local fault detection in gears, Mechanical Systems and Signal Processing 14(3) (2000), 387-412.
12. R.B. Randal, Frequency analysis, Bruel & Kjaer, 1987.
13. H Tang, J-Z. Cha, Y. Wang and C. Zhang, The principle of cepstrum and its application in quantitative fault diagnostics of gears. ASME, Modal Analysis, Modeling, Diagnostics, and Control - Analytical and Experimental De-(38) (1991), 141-144.
14. L.Cohen, Time - frequency distributions-a review, Proceedings of the IEEE 77(7) (1989), 941-981.
15. C. Heneghan, S.M Khanna and A. Flock, Investigation the nonlinear dynamics of cellular motion in the inner ear using the short-time Fourier and continuous wavelet transform, IEEE Transactions on Signal Processing 42(12) (1994), 3335-3351.
16. S.R. Qin and Y.M Zhong, Research on the unified mathematical model for FT, STFT and WT and its application, Mechanical Systems and Signal Processing 18 (2004), 1335-1347.
17. W.J Wang and P.D. McFadden, Early detection of gear failure by vibration analysis-I. Calculation of time - frequency distribution, Mechanical Systems and Signal Processing 7(3) (1993), 193-203.
18. Y.M. Zhan and A.K.S Jardine, Adaptive autoregressive modeling of non-stationary vibration signals under distinct gear states Part 2: experimental analysis, Journal of Sound and Vibration 3(6) (2005), 451-476.
19. A. Belsak and J. Flasker, Detecting cracks in the tooth root of gears, Engineering Failure Analysis 14(1) (2007), 466-1475.
20. F.K. Choy, V. Polyshchuk, J.J. Zakrajsek, R.F. Handschuh and D.P. Townsend, Analysis of the effects of surface pitting and wear on the vibration of a gear transmission systems, Tribology International 29 (1996), 77-83.
21. T.A.C.M. Claasen and W.F.G.Mecklenbrauker, The Wigner distribution -a tool for time -frequency signal analysis, Part I:continuous-time signals, Philips Journal of Research 35(3) (1980), 217-250.
22. C.P. Janse and A.J.M. Kaizer, Time-Frequency distributions of loudspeakers: the application of the Wigner Distribution, Journal of The Audio Engineering Society 31(4) (1983), 198-222.
23. P.D. McFadden and W.J. Wang, Analysis of gear vibration signatures by the weighted Wigner - Ville distribution. Proceedings Institution of Mechanical Engineers, Journal of Mechanical Engineering Science (1992), 387-393.
24. Q. Meng and L. Qu, Rotating machinery fault diagnosis using wigner distribution, Mechanical Systems and Signal Processing 5(3) (1991), 155-166.
25. C.J. Stander, P.S. Heyns and W. Schoombie, Using vibration monitoring for local fault detection on gears operating under fluctuating load conditions, Mechanical Systems and Signal Processing 16(6) (2002), 1005-1024.
26. W.J. Staszewski, K. Worden and G.R. Tomlinson, Time-Frequency analysis in gearbox fault detection using the wigner-ville distribution and pattern recognition, Mechanical Systems and Signal Processing 11(5) (1997), 673-692.
27. S.J. Loutridis, Instantaneous energy density as a feature for gear fault detection, Mechanical Systems and Signal Processing 20 (2006), 1239-1253.
28. D.L. Jones and T.W. Parks, A resolution comparison of several time-frequency representations, IEEE Transaction on Signal Processing 40(2) (1992), 413-420.
29. G. Meltzer and Y.Y. Ivanov, Fault detection in gear drives with non-stationary rotational speed-part I: the time-frequency approach, Mechanical Systems and Signal Processing 17(5) (2003), 1033-1047.
30. N.Baydar andA. Ball, Detectionofgear deterioration under varying load conditions byusing the instantaneous power spectrum, Mechanical Systems and Signal Processing, 14, (6) (2000), 907-921.
31. R.D. Hippenstiel and P.M. De Oliveira, Time-varying spectral estimation using the instantaneous power spectrum (IPS), IEEE Transactions on Acoustics, Speech, and Signal Processing 38(10) (1990), 1752-1759.
32. I. Yesilyurt, Gear fault detection and severity assessment using vibration analysis, Ph.D. Dissertation, University of Manchester, 1997.
33. I. Yesilyurt, Fault detection and location in gears by the smoothed instantaneous power spectrum distribution, NDT&E International 36(7) (2003), 535-542.
34. H. Ozturk, Gearbox health monitoring and fault detection using vibration analysis, Ph.D. Dissertation, Dokuz Eylul University, 2006.
35. C.K. Chui, An introduction to wavelets: wavelet analysis and its applications, vol. I, Academic Press, Boston, 1992.
36. C. Kar and A.R. Mohanty, Monitoring gear vibrations through motor current signature analysis and wavelet transform, Mechanical Systems and Signal Processing 20(1) (2006), 158-187.
37. S. Loutridis, A local energy density methodology for monitoring the evolution of gear faults, NDT & E International 37 (2004), 447-453.
38. G.Y. Luo, D. Osypiw and M. Irle, On-line vibration analysis with fast continuous wavelet algorithm for condition monitoring of bearing, Journal of Vibration and Control 9 (2003), 931-947.
39. Y. Meyer, Wavelets: algorithms and applications, Society for Industrial and Applied Mathematics, Philadelphia, 1993.
40. N.G. Nikolaou and I.A. Antoniadis, Demodulation of vibration signals generated by defects in rolling element bearings using complex shifted morlet wavelet, Mechanical Systems and Signal Processing 16(4) (2002), 677-694.
41. Y. Ohue, A.Yoshida and M. Seki, Application of the wavelet transform to health monitoring and evaluation of dynamic characteristics, Proceedings of the Institution of Mechanical Engineers 218 (2004), 1-12.
42. Z.K. Peng and F.L. Chu, Application of the wavelet transform in machine condition monitoring and fault diagnostics: a review with bibliography, Mechanical Systems and Signal Processing 18 (2004), 199-221.
43. W.Q, Wang, F. Ismail and M.F. Golnaraghi, Assessment of gear damage monitoring techniques using vibration measurements, Mechanical Systems and Signal Processing 15(5) (2001), 905-922.
44. I. Yesilyurt, The application of conditional moments analysis to gearbox fault detection - A comparative study using the spectrogram and scalogram, NDT&E International 37(4) (2004), 309-320.
45. I. Yesilyurt, End mill breakage detection using mean frequency analysis of scalogram, International Journal of Machine Tools and Manufacture 46(3-4) (2005), 450-458.
46. H. Zheng, Z. Li and X. Chen, Gear fault diagnosis based on continuous wavelet transform, Mechanical Systems and Signal Processing 16(2-3) (2002), 447-457.
47. F. Hlawatsch and G.F. Boudreaux-Bartels, Linear and quadratic time - frequency signal representations, Signal Processing Magazine, IEEE (1992), 21-67.
48. I. Yesilyurt and H. Ozturk, Tool condition monitoring in milling using vibration analysis, International Journal of Production Research 45(4) (2007), 1013-1028.
49. H. Ozturk, M. Sabuncu and I. Yesilyurt, Early Detection of Pitting Damage in Gears using Mean Frequency of Scalogram, Journal of Vibration and Control 14(4) (2008), 469-484.