Synthesis, characterization, and structural properties of intracellular copolyester poly(3-hydroxybutyrate-co-3-hydroxyvalerate) produced by comamonas sp. EB 172 from renewable resource

International Journal of Polymer Analysis and Characterization

Volumn 15, Issue 6, 2010, Pages 329-340

  Mumtaz, Tabassum ^a,b   Abd Aziz, Suraini ^a   Yee, Phang Lai ^a   Yunus, Wan Md Zin Wan ^a   Shirai, Yoshihito ^c   Hassan, Mohd Ali ^a  

^a UNIVERSITY PUTRA MALAYSIA   (Malaysia)

^b Bangladesh Atomic Energy Commission   (Bangladesh)

^c KYUSHU INSTITUTE OF TECHNOLOGY   (Japan)

Author keywords

Comamonas sp. EB 172: characterization; Fed batch fermentation; Mixed organic acids; PHBV

Indexed keywords

ACIDOGENIC FERMENTATION; CARBON SOURCE; COMAMONAS SP. EB 172: CHARACTERIZATION; COPOLYESTERS; ELONGATION AT BREAK; FED-BATCH FERMENTATION; HYDROXYBUTYRIC ACIDS; MECHANICAL STRENGTH; MIXED ACIDS; MIXED ORGANIC ACIDS; PALM OIL; PH-STAT; PHBV; POLY(3-HYDROXYBUTYRATE-CO-3-HYDROXYVALERATE); POLYMER PRODUCTION; PROPIONIC; RENEWABLE RESOURCE; SEM; TRANSMISSION ELECTRON MICROSCOPE;

BIOMOLECULES; CHEMICAL PROPERTIES; COPOLYMERIZATION; COPOLYMERS; FERMENTATION; INDUSTRIAL APPLICATIONS; MECHANICAL PROPERTIES; ORGANIC ACIDS; ORGANIC POLYMERS; SOLVENT EXTRACTION; TENSILE TESTING; TRANSMISSION ELECTRON MICROSCOPY; VEGETABLE OILS; WASTEWATER;

BUTYRIC ACID;

EID: 78650549955     PISSN: 1023666X     EISSN: 15635341     Source Type: Journal    
DOI: 10.1080/1023666X.2010.500522     Document Type: Article

References (26)

1. Holmes, P. A. 1985. Applications of PHBs: A microbially produced biodegradable thermoplastic. Phys. Technol. 16: 32-36.
2. Gomes, E. V. D., C. M. F. Oliveira, and M. L. Dias. 2009. Blends of poly(hydroxybutyrate) and oligomeric polyester. Int. J. Polym. Anal. Charact. 14(1): 68-83.
3. González, M., P. Ortíz, M. Rapado, and N. Galego. 2008. Radiation-induced graft copolymerization of vinyl acetate onto poly(3-hydroxybutyrate): Synthesis and characterization. Int. J. Polym. Anal. Charact. 13 (5): 376-392.
4. González, M., M. Rapado, A. Perez Gonzalez, and M. González Pérez. Radiation-induced graft copolymerization of metacrylic acid and butyl methacrylate onto poly(3-hydroxybutyrate). Int. J. Polym. Anal. Charact. 14 (3): 179-195.
5. Zagar, E., A. Krzan, G. Adamus, and M. Kowalczuk. 2006. Sequence distribution in microbial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) co-polyesters determined by NMR and MS. Biomacromolecules 7: 2210-2216.
6. Bauer, H., and A. J. Owen. 1988. Some structural and mechanical properties of bacterially produced poly-b-hydroxybutyrate-co-b-hydroxyvalerate. Colloid Polym. Sci. 266: 241-247.
7. Dai, Y., L. Lambert, Z. Yuan, and J. Keller. 2008. Characterisation of polyhydroxyalk- anoate copolymers with controllable four-monomer composition. J. Biotechnol. 134: 137-145.
8. Hassan, M. A., O. Nawata, Y. Shirai, N. A. A. Rahman, P. L. Yee, and A. B. Ariff. 2002. A proposal for zero emission from palm oil industry incorporating the production of poly- hydroxyalkanoates from palm oil mill effluent. J. Chem. Eng. Jpn. 35 (1): 9-14.
9. Hassan, M. A., Y. Shirai, N. Kusubayashi, M. I. A. Karim, K. Nakanishi, and K. Hashimoto. 1996. Effect of organic acids profiles during anaerobic treatment of palm oil mill effluent on the production of PHA by Rhodobacter sphaeroides. J. Ferment. Bioeng. 82: 151-156.
10. Hassan, M. A., Y. Shirai, H. Umeki, H. Yamazumi, S. Jin, S. Yamamoto, M. I. A. Karim, K. Nakanishi, and K. Hashimoto. 1997. Acetic acid separation from anaerobically treated palm oil mill effluent for the production of polyhydroxyalkanoate by Alcaligenes eutrophus. Biosci. Biotechnol. Biochem. 61: 1465-1468.
11. Nor'Aini, A. R., M. A Hassan, Y. Shirai, M. I. A. Karim, and A. B. Ariff. 1999. Pro- duction of organic acids from palm oil mill effluent during continuous anaerobic treat- ment. Asia Pac. J. Mol. Biol. Biotechnol. 7 (2): 179-184.
12. Phang, L. Y., M. A. Hassan, Y. Shirai, M. Wakisaka, and M. I. A. Karim. 2003. Continu- ous production of organic acids from palm oil mill effluent with sludge recycle by the freezing-thawing method. J. Chem. Eng. Jpn. 36 (6): 707-710.
13. Sim, K. H., Y. Shirai, A. R. Nor'Aini, and M. A. Hassan. 2009. Semi-continuous and con- tinuous anaerobic treatment of palm oil mill effluent for the production of organic acids and polyhydroxyalkanoates. Res. J. Environ. Sci. 3 (5): 552-559.
14. Zakaria, M. R., A. A. Suraini, H. Ariffin, A. R. Nor'Aini, L. Y. Phang, and M. A. Hassan. 2008. Comamonas sp. EB172 isolated from digester treating palm oil mill effluent as potential polyhydroxyalkanoate (PHA) producer. Afr. J. Biotechnol. 7: 4118-4121.
15. Zakaria, M. R., M. Tabatabaei, F. M. Ghazali, S. Abd-Aziz, Y. Shirai, and M. A. Hassan. 2010. Polyhydroxyalkanoate production from anaerobically treated palm oil mill effluent by new bacterial strain Comamonas sp. EB172. World J. Microbiol. Biotechnol. 26 (5): 391-397.
16. Zakaria, M. R., H. Ariffin, N. A. M. Johar, S. Abd-Aziz, H. Nishida, Y. Shirai, and M. A. Hassan. In press. Biosynthesis and characterization of poly(3-hydroxybutyrate-co- 3-hydroxyvalerate) copolymer from wild-type Comamonas sp. EB172. Polym. Degradation Stab. 95: 1382-1386, doi:10.1016=j.polymdegradstab.2010.01.020.
17. Mumtaz, T., S. Abd-Aziz, N. A. A. Rahman, L. Y. Phang, Y. Shirai, and M. A. Hassan. 2008. Pilot-scale recovery of low molecular weight organic acids from anaerobically treated palm oil mill effluent (POME) with energy integrated system. Afr. J. Biotechnol. 7: 3900-3905.
18. Yu, J., Y. Si, W. Keung, and R. Wong. 2002. Kinetic modeling of inhibition and utiliza- tion of mixed volatile fatty acids in the formation of polyhydroxyalkanoates by Ralstonia eutropha. Process Biochem. 37 (7): 731-738.
19. Chanprateep, S., H. Shimizu, and S. Shioya. 2006. Characterization and enzymatic degra- dation of microbial copolyester P(3HB-co-3HV)s produced by metabolic reaction model-based system. Polym. Degradation Stab. 91: 2941-2950.
20. Doi, Y. 1990. Microbial Polyesters. Ch. 3. New York: VCH Publishers.
21. Kemavongse, K., P. Prasertsan, A. Upaichit, and P. Methacanon. 2008. Poly-b-hydroxy- alkanoate production by halotolerant Rhodobacter sphaeroides U7. World J. Microbiol. Biotechnol. 24: 2073-2085.
22. Xu, J., B. H. Guo, R. Yang, Q. Wu, G. Q. Chen, and Z. M. Zhang. 2002. In situ FTIR study on melting and crystallization of polyhydroxyalkanoates. Polymer 43: 6893-6899.
23. Luo, S., D. T. Grubb, and A. N. Netravali. 2002. Polymer 43: 4159-4166.
24. Wang, S., P. Ma, R. Wang, S. Wang, Y. Zhang, and Y. Zhang. 2008. Mechanical, thermal and degradation properties of poly(d,l-lactide)=poly(hydroxybutyrate- cohydroxyvalerate)=poly(ethylene glycol) blend. Polym. Degradation Stab. 93: 1364-1369.
25. Luo, S., and A. N. Netravali. 2003. A study of physical and mechanical properties of poly(hydroxybutyrate-co-hydroxyvalerate) during composting. Polym. Degradation Stab. 80: 59-66.
26. Muhamad, I. I., L. K. Joon, and M. A. M. Noor. 2006. Comparing the degradation of poly-b(hydroxybutyrate), poly-b(hydroxybutyrate-co-valerate) (PHBV) and PHBV= cellulose triacetate blend. Malaysian Polym. J. 1 (1): 39-46.