Heat transfer measurements in a rotating two-pass square channel

Quantitative InfraRed Thermography Journal

Volumn 4, Issue 1, 2007, Pages 41-62

  Gallo, Mauro ^a   Astarita, Tommaso ^a   Maria, Giovanni ^a  

^a UNIVERSITY OF NAPLES FEDERICO II   (Italy)

Author keywords

Convective heat Transfer; Gas turbine cooling; Infrared thermography; Rotating channel

Indexed keywords

EID: 78650440202     PISSN: 17686733     EISSN: 21167176     Source Type: Journal    
DOI: 10.3166/qirt.4.41-62     Document Type: Article

References (27)

1. Al-Hadhrami L. and Han J.-C., “Effect of rotation on heat transfer in two-pass square channel with five different orientations of 45° angled rib turbulators”, International Journal of Heat and Mass Transfer, Vol. 46, pp. 653-669, 2003.
2. Al-Qahtani M., Jang Y.-J., Chen H.-C., and Han J.-C., “Flow and heat transfer in rotating two-pass rectangular channels (AR=2) by Reynolds stress turbulence model”, International Journal of Heat and Mass Transfer, Vol. 45, pp. 1823-1838, 2002.
3. Arts T., Lambert de Rouvroit M., Rau G. and Acton P., “Aerothermal investigations of the flow developing in a 180° sharp turn”, in Proceedings of the International Symposium on Heat Transfer in Turbomachinery, Athens, 1992.
4. Astarita T., Cardone G. and Carlomagno G.M., “IR heat transfer measurements in a rotating channel”, in: Quantitative Infrared Thermography-QIRT 96, Eds. Balageas D., Busse G. and Carlomagno G.M. Edizioni ETS, Pisa, Italy, 1997, pp. 123-128.
5. Astarita T. and Cardone G., “Thermofluidynamics analysis of the flow in a sharp 180° turn channel”, Experimental Thermal and Fluid Science, Vol. 20, pp. 188-200, 2000.
6. Astarita T., Cardone G., and Carlomagno G. M., “Convective heat transfer in ribbed channels with a 180° turn”, Experiments in Fluids, Vol. 33, pp. 90-100, 2002.
7. Carlomagno G.M. and de Luca L., “ Infrared Thermography in Convective Heat Transfer”, Handbook of flow visualization, W.J. Yang ed., pp. 547-575, 2001.
8. Dittus P.W. and Boelter L.M.K., “Heat transfer in automobile radiators of the tubular type”, Univ. Calif. Pub. Eng., Vol. 2, n. 13, pp 443–461, 1930 (reprinted in Int. J. Comm. Heat and Mass Transfer, Vol. 12, pp. 3-22, 1985)
9. Dutta S. and Han J.-C., “Local heat transfer in rotating smooth and ribbed two-pass square channels with three channel orientations”, Journal of Heat Transfer, Vol. 118, pp. 578-584, 1996.
10. Han J. C., Chandra P. R., and Lau S. C., “Local heat/mass transfer distributions around sharp 180 deg turns in two-pass smooth and rib-roughened channels”, Journal of Heat Transfer, Vol. 110, pp 91-98, 1988.
11. Han J.C., Zhang Y.M. and Kalkuelhler K., “Uneven wall temperature effect on local heat transfer in a rotating two-pass square channel with smooth walls”, ASME Journal of Heat Transfer, Vol. 115, pp. 912-920, 1993.
12. Hsieh S.-S. and Liu W.-J., “Uneven wall heat flux effect on local heat transfer in rotating twopass channels with two opposite ribbed walls”, Journal of Heat Transfer, Vol. 118, pp. 864-876, 1996.
13. Iacovides H., Launder B.E., and Li H-Y., “The computation of flow development through stationary and rotating U-ducts of strong curvature”, International Journal of Heat and Fluid Flow, Vol. 17, pp. 22-33, 1996.
14. Iacovides H., Jackson D.C., Kelemenis G., Launder B. E. and Yuan Y.M., “Experiments on local heat transfer in a rotating square-ended U-bend”, International Journal of Heat and Fluid Flow, Vol. 20, pp. 302-310, 1999.
15. Iacovides H. and Raisee M., “Recent progress in the computation of flow and heat transfer internal cooling passages of turbine blades”, International Journal of Heat and Fluid Flow, Vol. 20, pp. 320-328, 1999.
16. Johnston J.P., Hallen R.M. and Lezius D.K., “Effects of spanwise rotation on the structure of two–dimensional fully developed turbulent channel flow”, Journal of Fluid Mechanics, Vol. 56, part 3, pp. 533-557, 1972.
17. Kiml R., Mochizuki S., and Murata A., “Influence of 180 degree sharp turn on the heat transfer and flow behavior in a smooth square cross sectional serpentine channel”, in Proceedings of the 8th International Symposium of Flow Visualization, 1998.
18. Kline S.J., and McClintok F.A., “Describing uncertainties in single-sample experiment”, Mech. Eng., Vol. 75, pp. 3-8, 1953.
19. Kukreja R.T., Park C.W., and Lau S.C., “Heat (mass) transfer in a rotating two-pass square channel – part II: local transfer coefficient, smooth channel”, International Journal of Rotating Machinery, Vol. 4, No. 1, pp. 1-15, 1998.
20. Lezius D.K. and Johnston J.P., “Roll–cell instabilities in rotating laminar and turbulent channel flows”, Journal of Fluid Mechanics, Vol. 77, part 1, pp. 153-175, 1976.
21. Liou T.-M., Chen C.-C., and Tsai T.-W., “Liquid crystal measurements of heat transfer in a 180-deg sharp turning duct with different divider thickness”, in Proceedings of the 8th International Symposium of Flow Visualization, 1998.
22. Mochizuki S., Murata A., and Fukunaga M., “Effects of rib arrangements on pressure drop and heat transfer in a rib-roughened channel with a sharp 180 deg turn”, Journal of Turbomachinery, Vol. 119, pp. 610-616, 1997.
23. Murata A. and Mochizuki S., “Large eddy simulation of turbulent heat transfer in a rotating two-pass smooth square channel with sharp 180° turns”, International Journal of Heat and Mass Transfer, Vol. 47, pp. 683-698, 2004.
24. Qin Z. and Pletcher R.H., “Large eddy simulation of turbulent heat transfer in a rotating square duct”, International Journal of Heat and Fluid Flow, Vol. 27, pp. 371-390, 2006.
25. Su G., Chen H.-C., Han J.-C. and Heidmann J.D., “Computation of flow and heat transfer in rotating two-pass rectangular channels (AR = 1:1, 1:2, 1:4) with smooth walls by a Reynolds stress turbulence model”, International Journal of Heat and Mass Transfer, Vol. 47, pp. 5665-5683, 2004.
26. Wagner J.H., Johnson B.V. and Kopper F.C., “Heat transfer in rotating serpentine passages with smooth walls”, ASME Journal of Turbomachinery, Vol.113, pp. 321-330, 1991.
27. Wagner J.H., Johnson B.V., Graziani R.A., and Yeh F.C., “Heat transfer in rotating serpentine passages with trips normal to the flow”, Journal of Turbomachinery, Vol. 114, pp. 847-857, 1992.