Alternating current drives in the steel industry

IEEE Industrial Electronics Magazine

Volumn 4, Issue 4, 2010, Pages 30-42

  Chattopadhyay, Ajit Kumar ^a  

^a INDIAN INSTITUTE OF ENGINEERING SCIENCE AND TECHNOLOGY   (India)

Author keywords

[No Author keywords available]

Indexed keywords

AC DRIVES; ALTERNATING CURRENT; CONTROL TECHNOLOGIES; CYCLOCONVERTERS; DC DRIVES; DIRECT TORQUE CONTROL; GATE TRANSISTORS; GATE TURN-OFF THYRISTORS; HIGH-POWER; HIGH-POWER DEVICES; INTEGRATED GATE-COMMUTATED THYRISTORS; RAPID DEVELOPMENT; SIGNAL PROCESSOR; SILICON CONTROLLED RECTIFIER; STEEL INDUSTRY; THREE-LEVEL INVERTERS; VECTOR CONTROLS;

AC GENERATOR MOTORS; AC MOTORS; BIPOLAR TRANSISTORS; DC POWER TRANSMISSION; ELECTRIC SWITCHGEAR; INDUCTION MOTORS; INDUSTRY; IRON AND STEEL PLANTS; POWER ELECTRONICS; SIGNAL PROCESSING; STEELMAKING; SYNCHRONOUS MOTORS; THYRISTORS; TORQUE CONTROL; TORQUE CONVERTERS;

ELECTRIC RECTIFIERS;

EID: 78650288433     PISSN: 19324529     EISSN: None     Source Type: Journal    
DOI: 10.1109/MIE.2010.938719     Document Type: Article

References (52)

1. Kawasaki Steel 21st Century Foundation. (2001). An Introduction to Iron and Steel Processing, Kawasaki Steel 21st Century Foundation ch. 2 [Online]. Available: http://www.jfe-21st-cf.or.jp/chapter-2/2a-1.html
2. A. K. Paul, I. Banerjee, B. K. Santra, and N. Neogi, "Application of AC motors and drives in steel industries," in Proc. National Power Systems Conf. (NPSC), IIT Bombay, Dec. 2008, pp. 159-163.
3. A. K. Chattopadhyay, "Cycloconverters and cycloconverter-fed drives: A review," J. Indian Inst. Sci., vol. 77, pp. 397-419, Sept./Oct. 1997.
4. A. K. Chattopadhyay, "Advances in vector control of ac motor drives - A review," Sadhana, vol. 22, no. 6, pp. 797-820, Dec. 1997.
5. S. Fruchtenicht and J. Anderson. (2002). Choosing the best rolling mill main drive [Online]. Available: http://www.industry.siemens.com/metals-mining- more/htmn0300/ art-02.html
6. Z. Yuliang, A. Friman, and L. Modig, "Advanced single and multi-drive systems for plate rolling mills," Millennium Steel, 2008, pp. 168-170.
7. B. Wu, High-Power Converters and AC Drives. New York: IEEE Press/Wiley-Inter-science, 2006, p. 18, 311.
8. K. Sato and M. Yamamoto, "The present state of the art in high-power semiconductor devices," Proc. IEEE, vol. 89, no. 6, pp. 813-821, June 2001.
9. S. Bernett, "Recent developments of high power converters for industry and traction applications," IEEE Trans. Power Electron., vol. 15, no. 6, pp. 1102-1117, Nov. 2000.
10. K. Ichikawa, M. Tsukakoshi, and R. Nakajima, "Higher efficiency three-level inverter employing IEGTs," in Proc. 19th Annu. IEEE Applied Power Electronics Conf. (IEEE-APEC), 2004, pp. 1663-1668.
11. K. Ichikawa, T. Shimoura, K. Kawakami, R. Nakajima, and A. Hirata, "New advanced high voltage inverters employing IEGTs," in Proc. Int. Power Electronics Conf. (IPEC), Tokyo, 2000, pp. 994-999.
12. R. Tessendorf and H. Hosoda, "AC drive technology 5-year trends," Proc. AISTech, Sept. 2004, pp. 1-15.
13. A. Nabae, I. Takahasi, and A. Hirofumi, "A new neutral-point clamped PWM inverter," IEEE Trans. Ind. Applicat., vol. 17, pp. 518-523, Sept./Oct. 1981.
14. W. Timpe, "Cycloconverter drives for rolling mills," IEEE Trans. Ind. Applicat., vol. IA-18, no. 4, pp. 400-404, December 1982.
15. S. Yoshida and J. Urakami, "High performance adjustable AC drive systems," Nippon Steel, Japan, Tech. Rep. 74, July 1997, pp. 51-56.
16. K. Sugi, Y. Naito, H. Kurosawa, and Y. Kano, "A microprocessor-based high capacity cycloconverter drive for main rolling mill," in Proc. Int. Power Electronics Conf. (IPEC), Tokyo, 1983, pp. 744-755.
17. K. Ishihara, S. Katayama, T. Kobuku, M. Yasaka, and R. Kurosawa, "Application of new drive systems for plate mill drives," IEEE Trans. Ind. Applicat., vol. IA-22, no. 2, pp. 345-351, Mar./Apr. 1986.
18. R. Hagmann, "AC-cycloconverter drives for cold and hot rolling mill applications," in IEEE-IAS 1991 Annu. Meeting Conf. Rec., pp. 1134-1140.
19. R. A. Hamilton and G. R. Lezan, "Thyristor adjustable frequency power supplies for hot strip mill run-out tables," IEEE Trans. Ind. General Applicat., vol. IGA-3, no. 2, pp. 168-175, 1967.
20. F. Blashke, "The principle of field orientation as applied to the new TRANSVECTOR closed loop control system for rotating field machines," Siemens Rev., vol. 39, pp. 217-220, 1972.
21. K. H. Bayer, H. Waldman, and M. Weibellzahl, "Field oriented close-loop control of a synchronous machine with the new transvector control system," Siemens Rev., vol. 39, pp. 220-223.
22. J. Rodriguez, J. Pontt, P. Newman, L. Moran, and G. Alzamora, "Technical evaluation and practical experience of high power grinding mill drive in mining applications," in IEEE-IAS Conf. Rec., vol. 3. pp. 1629-1636.
23. T. Nakano, H. Ohsawa, and K. Endoh, "A high performance cycloconverter-fed synchronous machine drive system," IEEE Trans. Ind. Applicat., vol. IA-20, no. 5, pp. 1278-1284, Sept./Oct. 1984.
24. S. P. Das and A. K. Chattopadhyay, "Observer-based stator flux oriented vector control of a cycloconverter-fed synchronous motor drive," IEEE Trans. Ind. Applicat., vol. IA-33, pp. 943-955, July/Aug. 1997.
25. A. K. Chattopadhyay, "High power high performance industrial AC drives - A review," in Proc. India Int. Conf. Power Electronics (IICPE) 2002, Mumbai, Nov. 2002, pp. 1-12.
26. H. Okayama, M. Koyama, S. Tamai, T. Fujii, R. Uchida, S. Mizoguchi, H. Ogawa, and Y. Shimomura, "Large capacity high performance 3-level GTO inverter system for steel main rolling mill drives," in IEEE IAS Conf. Rec., 1996, pp. 174-179.
27. M. Tobise, K. Onda, S. Sugiyama, and M. Yamashina, "Inverter-fed AC drive systems for steel rolling mills," Hitachi Rev., vol. 45, no. 6, pp. 299-304, 1996.
28. Special Issue on Hitachi Technology, 2007-2008, Hitachi Rev., p. 28, 2008.
29. H. Masuda and M. Toyoda, "Variablespeed drive systems for steel plants," Mitsubishi Electric ADVANCE, Dec. 2000, pp. 17-20.
30. S. Malik and D. Kluge, "ACS 1000 - World's first standard AC drive for medium voltage applications," ABB Rev., vol. 2, pp. 4-11, 1998. (Pubitemid 128433844)
31. [Online]. Available: http://www05.abb.com/global/scot/scot227.nsf/ veritydisplay/ae7e1f 4046cbcf17482573950004815c/$File/ABB-drives-in- metals-RevA.pdf
32. M. Depenbrock, "Direct self control (DSC) of inverter-fed induction machine," IEEE Trans. Power Electron., vol. 3, no. 4, pp. 420-429, Oct. 1988.
33. I. Takahasi and N. Noguchi, "A new quick response and high efficiency control strategy of an ac induction motor," IEEE Trans. Ind. Applicat., vol. IA-22, pp. 820-827, Sept./Oct. 1986.
34. J. N. Nash, "Direct torque control, induction motor vector control without an encoder," IEEE Trans. Ind. Applicat., vol. IA-33, no. 2, pp. 333-341, Mar./Apr. 1997.
35. B. K. Bose, Power Electronics and Motor Drives - Advances and Trends. Burlington, MA: Academic, 2006, p. 413.
36. N. R. N. Idris, C. L. Toh, and M. E. Elbulik, "A new torque and flux controller for direct torque control of induction machines," IEEE Trans. Ind. Applicat, vol. IA-42, no. 6, pp. 1358-1366, Nov./Dec. 2006.
37. H. Wiechmann, "Continuous innovation in large drives for rolling mills," Millennium Steel, 2005, pp. 223-226.
38. M. Koyama, Y. Shimomura, H. Yamaguchi, M. Mukunoki, H. Okayama, and S. Mizoguchi, "Large capacity high efficiency three-level GCT inverter system for steel rolling mill drives," in Proc. European Power Electronics Conf. (EPE) 2001, Graz, Austria, pp. 1-8.
39. H. Hosoda, S. Wada, S. Kodama, and L. Junfeng, "Recent hot strip mill in China," in IEEE-PEDS 2005 Conf. Rec, pp.1078-1083.
40. J. P. Lyons, V. Vlatkovic, P. M. Espelege, F. H. Boettner, and E. Larsen, "Innovation IGCT main drives," in IEEE-IAS Conf. Rec, 1999, pp. 2655-2661.
41. K. Suzuki, H. Hosada, M. Tsukakoshi, and R. Fickier, "IEGT inverter for main drives in the steel industry," in Proc. Association of Iron and Steel Engineers (AISE) 2001, pp. 1-7.
42. M. Tsukakoshi, M. Mukunoki, and R. Nakamura, "High performance IEGT inverter for main drives in the steel industry," in Proc. Int. Power Electronics Conf. (IPEC), Nilgata, 2005, vol. S15-2. pp. 724-729.
43. GE Toshiba Automation System, "A new family of MV drives for a new converter-DURABUILT 5i MV," Product Brochure-Mar. 2003, p. 50.
44. R. Tessendorf, S. Kodama, and H. Hosada, "Large PWM inverters for rolling mills," Iron and Steel Industry, vol. 5, no. 1, pp. 65-74, Jan. 2008.
45. R. Singh and M. Pecht, "Commercial impact of silicon carbide - Opportunities and challenges in realizing the full potential of SiC power devices," IEEE Ind. Electron. Mag., vol. 2, no. 3, pp. 19-31, Sept. 2008.
46. E. Monmassom and M. Cirstea, "FPGA design methodology for industrial control systems - A review," IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 1824-1842, Aug. 2007.
47. S. Simard, R. Beguenane, and J. G. Maillox, "Performance evaluation of rotor flux-oriented control on FPGA for advanced AC drives," J. Robot. Mechatronics, vol. 21, no. 1, pp. 113-120, 2009.
48. C. T. Kowalski, J. Lis, and T. O. Kowalski, "FPGA implementation of DTC control method for the induction motor drive," in Proc. IEEE-EUROCON, Warsaw, Poland, Sept. 9-12, 2007, pp. 1916-1921.
49. B. A. Welchko, T. A. Lipo, T. M. Jahns, and S. E. Schulz, "Fault tolerant three- phase AC motor drive topologies: A comparison of features, cost, and limitations," IEEE Trans. Power Electron., vol. 19, no. 4, pp. 1108-1116, July 2004.
50. D. V. C. Delgado, D. R. E. Trejo, and E. Palacious, "Fault tolerant control in variable speed drives: A survey," IET Electr. Power Applicat, vol. 2, no. 2, pp. 121-134, Apr. 2008.
51. P. Bhoopalapur, "AC drives in metal industries," in IEEE-PEDS Conf. Rec, 1997, vol. 2, pp. 823-828.
52. L. H. Dreinhoefer and F. D. Magee, "AC drives in the metals industry," IEEE-IAS Conf. Rec, pp. 1234-1238, 2002.