Use of inorganic materials to enhance thermal stability and flammability behavior of a polyimide

Polymer Degradation and Stability

Volumn 96, Issue 1, 2011, Pages 23-32

  Morgan, Alexander B ^a   Putthanarat, Sirina ^a,b  

^a UNIVERSITY OF DAYTON RESEARCH INSTITUTE   (United States)

^b AIR FORCE RESEARCH LABORATORY   (United States)

Author keywords

Flammability; Inorganic nanoparticles; Polyimides; Thermal decomposition

Indexed keywords

A-CARBON; AGGRESSIVE ENVIRONMENT; HIGH HEAT FLUX; HIGH TEMPERATURE; INORGANIC FILLERS; INORGANIC MATERIALS; INORGANIC NANOPARTICLE; INORGANIC PARTICLES; MICRON-SIZED PARTICLES; POLYIMIDE COMPOSITES; POLYIMIDE MATRIX; PROPERTY DEGRADATION; RESIN PELLETS; RISK SCENARIOS; STRUCTURAL FAILURE; THERMAL DECOMPOSITIONS; THERMAL STABILITY; THIN COATING;

BIOGEOCHEMISTRY; CARBON FIBERS; FLAMMABILITY; FRACTURE MECHANICS; HEAT FLUX; HEAT RESISTANCE; NANOPARTICLES; NEMATIC LIQUID CRYSTALS; PROTECTIVE COATINGS; PYROLYSIS; RESINS; RISK PERCEPTION; STRUCTURAL MEMBERS; STRUCTURE (COMPOSITION); THERMODYNAMIC STABILITY;

POLYIMIDES;

EID: 78650270694     PISSN: 01413910     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.polymdegradstab.2010.11.005     Document Type: Article

References (46)

1. G.A. Schoeppner, G.P. Tandon, and K.V. Pochiraju Predicting thermo-oxidative degradation and performance of high temperature polymer matrix composites Y. Kwon, D. Allen, R. Talreja, Multiscale modeling and simulation of composite materials and structures 2008 Springer Verlag 978-0-387-36318-9 359 462
2. K.V. Pochiraju, and G.P. Tandon Modeling thermo-oxidation layer growth in high temperature resins J Eng Mater Technol 128 1 2006 107 116 [special issue on time-dependent behaviors of polymer matrix composites and polymers]
3. G.P. Tandon, K.V. Pochiraju, and G.A. Schoeppner Modeling of oxidative development in PMR-15 resin Polym Degrad Stab 91 8 2006 1861 1869
4. G.A. Schoeppner, G.P. Tandon, and E.R. Ripberger Anisotropic oxidation and weight loss in PMR-15 composites Compos Part A: Appl Sci Manuf 38 2007 890 904
5. G.P. Tandon, K.V. Pochiraju, and G.A. Schoeppner Thermo-oxidative behavior of high temperature PMR-15 resin and composites Mater Sci Eng - A 498 2008 150 161
6. S. Putthanarat, G.P. Tandon, and G.A. Schoeppner Influence of aging temperature, time, and environment on thermo-oxidative behavior of PMR-15: Nanomechanical characterization J Mater Sci 43 2008 6714 6723
7. K.V. Pochiraju, G.P. Tandon, and G.A. Schoeppner Evolution of stress and deformations in high-temperature polymer matrix composites during thermo-oxidative aging Mech Time-Dependent Mater 12 2008 45 68
8. G.P. Tandon, W.R. Ragland, and G.A. Schoeppner Using optical microscopy to monitor anisotropic oxidation growth in high-temperature polymer matrix composites J Compos Mater 43 2009 583 603
9. K.V. Pochiraju, and G.P. Tandon Interaction of oxidation and damage in high temperature polymeric matrix composites Compos Part A 2009 doi:10.1016/j.compositesa.2009.03.010
10. Y.C. Lu, G.P. Tandon, and G.A. Schoeppner Elastic and viscoelastic characterization of thermally-oxidized polymer resin using nanoindentation Mech Time-Dependent Mater 2009 doi:10.1007/s11043-009-9088-7
11. A.B. Morgan, and J.M. Tour Synthesis and testing of nonhalogenated alkyne-containing flame retarding polymer additives Macromolecules 31 1998 2857 2865
12. J. Lefebvre, V. Mamleev, M. Le Bras, and S. Bourbigot Kinetic analysis of pyrolysis of cross-linked polymers Polym Degrad Stab 88 2005 85 91 (Pubitemid 40245003)
13. E. Farkas, Z.G. Meszena, and A. Toldy Modelling of transport processes in a developing char Polym Degrad Stab 93 2008 1205 1213
14. K. Eguchi, and G.A. Zank Silicon oxycarbide glasses derived from polymer precursors J Sol-Gel Sci Technol 13 1998 945 949
15. T. Kashiwagi, J.W. Gilman, K.M. Butler, R.H. Harris, J.R. shields, and A. Asano Flame retardant mechanism of silica gel/silica Fire Mater 24 2000 277 289 (Pubitemid 32159304)
16. A. Hermansson, T. Hjertberg, and B.-A. Sultan Linking the flame-retardant mechanisms of an ethylene-acrylate copolymer, chalk and silicone elastomer system with its intumescent behavior Fire Mater 29 2005 407 423 (Pubitemid 41754239)
17. G. Marosi, A. Marton, P. Anna, G. Bertalan, B. Marosfoi, and A. Szep Ceramic precursor in flame retardant systems Polym Degrad Stab 77 2002 259 265 (Pubitemid 34772650)
18. T. Kashiwagi, and J.W. Gilman Silicon based flame retardants A.F. Grand, Flame retardancy of polymeric materials 2000 Wilkie CA Marcel Dekker, Inc NY, NY 353 389
19. J.W. Gilman, S.J. Ritchie, T. Kashiwagi, and S.M. Lomakin Fire-retardant additives for polymeric materials - I. char formation from silica gel-potassium carbonate Fire Mater 21 1997 23 32 (Pubitemid 127548210)
20. S. Bourbigot, T. Turf, S. Bellayer, and S. Duquesne Polyhedral oligomeric silsesquioxane as flame retardant for thermoplastic polyurethane Polym Degrad Stab 94 2009 1230 1237
21. A.B. Morgan Flame retarded polymer layered silicate nanocomposites: a review of commercial and open literature systems Polym Adv Technol 17 2006 206 217
22. J.W. Gilman, C.L. Jackson, A.B. Morgan, R. Harris, E. Manias, and E.P. Giannelis Flammability properties of polymer-layered silicate nanocomposites. polypropylene and polystyrene nanocomposites Chem Mater 12 2000 1866 1873
23. A.B. Morgan, R.H. Harris, T. Kashiwagi, L.J. Chyall, and J.W. Gilman Flammability of polystyrene layered silicate (clay) nanocomposites: carbonaceous char formation Fire Mater 26 2002 247 253
24. J.W. Gilman, R.H. Harris, J.R. Shields, T. Kashiwagi, and A.B. Morgan A study of the flammability reduction mechanism of polystyrene-layered silicate nanocomposite: layered silicate reinforced carbonaceous char Polym Adv Technol 17 2006 263 271 (Pubitemid 43772837)
25. B.H. Cipiriano, T. Kashiwagi, S.R. Raghavan, Y. Yang, E.A. Grulke, and K. Yamamoto Effects of aspect ratio of MWNT on the flammability properties of polymer nanocomposites Polymer 48 2007 6086 6096 (Pubitemid 47379732)
26. T. Kashiwagi, F. Du, K. Winey, K.M. Groth, J.R. Shields, and S.P. Bellayer Flammability properties of polymer nanocomposites with single-walled carbon nanotubes: effects of nanotube dispersion and concentration Polymer 46 2005 471 481 (Pubitemid 40022512)
27. T. Kashiwagi, F. Du, J.F. Douglas, K.I. Winey, R.H. Harris, and J.R. Shields Nanoparticle networks reduce the flammability of polymer nanocomposites Nat Mater 4 2005 928 933
28. M. Moniruzzaman, and K.I. Winey Polymer nanocomposites containing carbon nanotubes Macromolecules 39 2006 5194 5205 (Pubitemid 44325095)
29. R. Haggenmueller, C. Guthy, J.R. Lukes, J.E. Fischer, and K.I. Winey Single wall carbon nanotube/polyethylene nanocomposites: thermal and electrical conductivity Macromolecules 40 2007 2417 2421 (Pubitemid 46608268)
30. M. Mu, A.M. Walker, J.M. Torkelson, and K.I. Winey Cellular structures of carbon nanotubes in a polymer matrix improve properties relative to composites with dispersed nanotubes Polymer 49 2008 1332 1337
31. S. Bredeau, S. Peeterbroeck, D. Bonduel, M. Alexandre, and P. Dubois From carbon nanotube coatings to high-performance polymer nanocomposites Polym Int 57 2008 547 553 (Pubitemid 351372447)
32. W. Bauhofer, and J.Z. Kovacs A review and analysis of electrical percolation in carbon nanotube polymer composites" Compos Sci Technol 69 2009 1486 1498
33. T. Kashiwagi, J.R. Shields, R.H. Harris, and R.D. Davis Flame-retardant mechanism of silica: effects of resin molecular weight J Appl Polym Sci 87 2003 1541 1553 (Pubitemid 36103742)
34. T. Kashiwagi, A.B. Morgan, J.M. Antonucci, M.R. VanLandingham, R.H. Harris, and W.H. Awad Properties of a silica-poly (methyl methacrylate) nanocomposite J Appl Polym Sci 89 2003 2072 2078
35. A. Beigbender, M. Linares, M. Devalckenaere, P. Degee, M. Claes, and D. Deljonne CH-π interactions as the driving force for silicone-based nanocomposites with exceptional properties Adv Mater 20 2008 1003 1007
36. A.I. Isayev, R. Kumar, and T.M. Lewis Ultrasound assisted twin screw extrusion of polymer-nanocomposites containing carbon nanotubes Polymer 50 2009 250 260
37. H. Koerner, D. Misra, A. Tan, L. Drummy, P. Mirau, and R.A. Vaia Montmorillonite-thermoset nanocomposites via cryo-compounding Polymer 47 2006 3435
38. R.E. Lyon, and R.N. Walters Pyrolysis combustion flow calorimetry J Anal Appl Pyrolysis 71 2004 27 46
39. R.N. Walters, and R.E. Lyon Molar group contributions to polymer flammability J Appl Polym Sci 87 2002 548 563 (Pubitemid 36018059)
40. P.M. Hergenrother, C.M. Thompson, J.G. Smith, J.W. Connell, J.A. Hinkley, and R.E. Lyon Flame retardant aircraft epoxy resins containing phosphorus Polymer 46 2005 5012 5024 (Pubitemid 40759043)
41. J.L. Jurs, and J.M. Tour Novel flame retardant polyarylethers: synthesis and testing Polymer 44 2003 3709 3714 (Pubitemid 36648644)
42. H. Zhang, R.J. Farris, and P.R. Westmoreland Low flammability and thermal decomposition behavior of poly(3,3'-dihydroxybiphenylisophthalamide) and its derivatives Polymer 36 2003 3944 3954
43. B. Schartel, K.H. Pawlowski, and R.E. Lyon Pyrolysis combustion flow calorimeter: a tool to assess flame retarded PC/ABS materials? Thermochim Acta 462 2007 1 14 (Pubitemid 47304452)
44. A.B. Morgan, and M. Galaska Microcombustion calorimetry as a tool for screening flame retardancy in epoxy Polym Adv Technol 19 2008 530 546
45. J.M. Cogen, T.S. Lin, and R.E. Lyon Correlations between pyrolysis combustion flow calorimetry and conventional flammability tests with halogen-free flame retardant polyolefin compounds Fire Mater 33 2009 33 50
46. R.E. Lyon, M.T. Takemori, N. Safronava, S.I. Stoliarov, and R.N. Walters A molecular basis for polymer flammability Polymer 50 2009 2608 2617