Effects of short-time heat treatment and subsequent chemical surface treatment on the mechanical properties, low-cycle fatigue behavior and corrosion resistance of a Ni-Ti (50.9at.% Ni) biomedical alloy wire used for the manufacture of stents

Materials Science and Engineering: A

Volumn 528, Issue 3, 2011, Pages 1864-1876

  Vojtech D ^a   Voderova M ^a   Kubasek J ^a   Novak P ^a   Seda P ^a   Michalcova A ^a   Fojt, J ^a   Hanus J ^b   Mestek, O ^a  

^a INSTITUTE OF CHEMICAL TECHNOLOGY   (Czech Republic)

^b CHARLES UNIVERSITY   (Czech Republic)

Author keywords

Fatigue; Fracture; Mechanical characterization; Oxidation; Shape memory alloys

Indexed keywords

BINARY ALLOYS; CORROSION RESISTANCE; CYCLIC LOADS; DIFFERENTIAL SCANNING CALORIMETRY; FRACTURE; HEAT RESISTANCE; HEAT TREATMENT; HIGH RESOLUTION TRANSMISSION ELECTRON MICROSCOPY; NICKEL ALLOYS; SCANNING ELECTRON MICROSCOPY; STENTS; STRAIN HARDENING; TENSILE STRENGTH; TENSILE TESTING; TITANIUM ALLOYS; WIRE;

ACIDIC BATHS; ALLOY WIRE; BIOMEDICAL ALLOYS; CHEMICAL ETCHING; CHEMICAL SURFACES; COLD-DRAWN; FATIGUE CORROSION; LOW-CYCLE FATIGUE BEHAVIORS; MECHANICAL CHARACTERIZATIONS; NI-TI WIRE;

SHAPE MEMORY EFFECT;

EID: 78650174546     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.msea.2010.10.043     Document Type: Article

References (50)

1. Miyazaki S., Otsuka K. Tetsu To Hagane-J. Iron Steel Inst. Jpn. 1989, 29:353-357.
2. Kim J.I., Miyazaki S. Acta Mater. 2005, 53:4545-4554.
3. Miyazaki S., Otsuka K. Metal. Trans. 1986, 17A:53-63.
4. Zhou Y., Zhang J., Fan G., Ding X., Sun J., Ren X., Otsuka K. Acta Mater. 2005, 53:5365-5377.
5. Frick C.P., Ortega A.M., Tyber J., Maksound A.E.M., Maier H.J., Liu Y., Gall K. Mater. Sci. Eng. A 2005, 405:34-49.
6. Peltonen M., Lindroos T., Kallio M. J. Alloy. Compd. 2008, 460:237-245.
7. Chrobak D., Stroz D. Scripta Mater. 2005, 52:757-760.
8. Zhou Y., Fan G., Zhang J., Ding X., Ren X., Sun J., Otsuka K. Mater. Sci. Eng. A. 2006, 438-440:602-607.
9. Kim J.I., Liu Y., Miyazaki S. Acta Mater. 2004, 52:487-499.
10. Khalil-Allafi J., Dlouhy A., Eggeler G. Acta Mater. 2002, 50:4255-4274.
11. Filip P., Mazanec K. Scripta Mater. 2001, 45:701-707.
12. Pelton A.R., Russell S.M., DiCello J. JOM 2003, 55:33-37.
13. Undisz A., Fink M., Rettenmayr M. Scripta Mater. 2008, 59:979-982.
14. Srivastava A.K., Yang Z., Schryvers D., Van Humbeeck J. Mater. Sci. Eng. A 2008, 481-482:594-597.
15. Thier M., Kubla G., Drescher D., Bourauel C. J. Phys. IV 1991, 1:181-186.
16. Drexel M.J., Selvaduray G.S., Pelton A.R. Proceedings of the International Conference on Shape Memory and Superelastic Technologies 2008, 447-454. ASM International, Pacific Grove. B. Berg, M.R. Mitchell, J. Proft (Eds.).
17. Stroz D. J. Phys. IV 1997, 7:293-297.
18. James B., Foulds J., Eiselstein L. J. Fail. Anal. Prev. 2005, 5:82-87.
19. Pelton A.R., Gong X.Y., Duerig T. Proceedings of the Materials and Processes for Medical Devices Conference 2004, 199-204. ASM International, Anaheim. S. Shrivastava (Ed.).
20. McKelvey A.L., Ritchie R.O. Met. Mater. Trans 2001, 32A:731-743.
21. Schuessler A., Piper M. Proceedings of the International Conference on Shape Memory and Superelastic Technologies 2006, ASM International, Baden-Baden, pp. 563-571.
22. Miyazaki S., Mizukoshi K., Ueki T., Sakuma T., Liu Y. Mater. Sci. Eng. A 1999, 273-275:658-663.
23. Morgan M.B. Mater. Sci. Eng. A 2004, 378:16-23.
24. Condorelli G.G., Bonaccorso A., Smecca E., Schafer E., Cantatore G., Tripi T.R. Int. Endod. J. 2010, 10.1111/j.1365-2591.2010.01759.x.
25. Pelton A.R., Schroeder V., Mitchell M.R., Gong X.Y., Barney M., Robertson S.W. J. Mech. Behav. Biomed. Mater. 2008, 1:153-164.
26. Biscarini A., Mazzola G., Tuissi A. Recent Patents Biomed. Eng. 2008, 1:180-196.
27. Polinski M.A., Norwich D.W., Wu M.H. Proceedings of the International Conference on Shape Memory and Superelastic Technologies 2008, 1-18. ASM International, Pacific Grove. B. Berg, M.R. Mitchell, J. Proft (Eds.).
28. Schaffer J.E., Plumley D.L. J. Mater. Eng. Perform. 2009, 18:563-568.
29. Robertson S.W., Stankiewicz J., Gong X.Y., Ritchie R.O. Proceedings of the International Conference on Shape Memory and Superelastic Technologies 2006, ASM International, Baden-Baden, pp. 79-88.
30. Demers V., Brailovski V., Prokoshkin S.D., Inaekyan K.E. Mater. Sci. Eng. A 2009, 513-514:185-196.
31. Robertson S.W., Ritchie R.O. Biomaterials 2007, 28:700-709.
32. Born P. Endoscopy 2009, 41:34.
33. Goenka A.H., Garg P.K., Sharma R., Sharma B. Endoscopy 2009, 41:204-205.
34. Wiedmann M., Heller F., Zeitz M., Mossner J. Endoscopy 2009, 41:129-130.
35. Zhu L., Fino J.M., Pelton A. Proceedings of the International Conference on Shape Memory and Superelastic Technologies 2004, 357-366. SMST, Monterey. A.R. Pelton, T. Duerig (Eds.).
36. Firstov G.S., Vitchev R.G., Kumar H., Blanpain B., Van Humbeeck J. Biomaterials 2002, 23:4863-4871.
37. Vojtěch D., Fojt J., Joska L., Novák P. Surf. Coat. Technol. 2010, 204:3895-3901.
38. Stoeckel D., Pelton A., Duerig T. Eur. Radiol. 2004, 14:292-301.
39. Shabalovskaya S.A., Rondelli G.C., Undisz A.L., Anderegg J.A., Burleigh T.D., Rettenmayr M.E. Biomaterials 2009, 30:3662-3671.
40. Shabalovskaya S.A., Anderegg J., Laab F., Thiel P.A., Rondelli G. J. Biomed. Mater. Res. 2003, 65B:193-203.
41. Munroe M., Pulletikurthi Ch., Haider W. J. Mater. Eng. Perform. 2009, 18:765-767.
42. Simka W., Kaczmarek M., Baron-Wiechec A., Nawrat G., Marciniak J., Zak J. Electrochim. Acta 2010, 55:2437-2441.
43. Shabalovskaya S., Anderegg J., Van Humbeeck J. Acta Biomater. 2008, 4:447-467.
44. Zhu L., Trepanier C., Pelton A.R. Proceedings of the Materials and Processes for Medical Devices Conference 2004, 156-161. ASM International, Anaheim. S. Shrivastava (Ed.).
45. Wong M.H., Cheng F.T., Man H.C. J. Alloy. Compd. 2008, 466:5-10.
46. Lin H.C., Wu S.K. Mater. Sci. Eng. A 1992, 158:87-91.
47. Khelfaoui F., Guenin G. Mater. Sci. Eng. A 2003, 335:292-298.
48. Toro A., Zhou F., Wu M.H., Geertruyden W., Misiolek W.Z. J. Mater. Eng. Perform. 2009, 18:448-458.
49. Vojtěch D., Joska L., Leitner J. Appl. Surf. Sci. 2008, 254:5664-5669.
50. Vojtěch D., Novák P., Novák M., Joska L., Fabián T., Maixner J., Machovič V. Intermetallics 2008, 16:424-431.