Mechanisms of bimaterial attachment at the interface of tendon to bone

Journal of Engineering Materials and Technology

Volumn 133, Issue 1, 2011, Pages

  Liu, Yanxin ^a   Birman, Victor ^b   Chen, Changqing ^c   Thomopoulos, Stavros ^d   Genin, Guy M ^a  

^a WASHINGTON UNIVERSITY IN ST LOUIS   (United States)

^b MISSOURI UNIVERSITY OF SCIENCE AND TECHNOLOGY   (United States)

^c TSINGHUA UNIVERSITY   (China)

^d WASHINGTON UNIVERSITY SCHOOL OF MEDICINE   (United States)

Author keywords

attachment of dissimilar materials; biomimetics; fiber reinforced laminate; material optimization; stress concentrations

Indexed keywords

BIOMIMETICS; DISSIMILAR MATERIALS; FIBER REINFORCED MATERIALS; GRADING; STRESS CONCENTRATION; SURGERY;

ATTACHMENT ANGLE; ENGINEERING PRACTICES; FIBER-REINFORCED LAMINATES; FUNCTIONAL GRADING; MATERIAL MISMATCH; MATERIAL OPTIMIZATION; THROUGH THE LENS; TISSUE MORPHOLOGY;

TENDONS;

EID: 78650007605     PISSN: 00944289     EISSN: 15288889     Source Type: Journal    
DOI: 10.1115/1.4002641     Document Type: Article

References (49)

1. Delale, F., 1984, "Stress Singularities in Bonded Anisotropic Materials," Int. J. Solids Struct., 20 [1 [, pp. 31-40.
2. Mittelstedt, C., and Becker, W., 2007, "Free-Edge Effects in Composite Laminates," Appl. Mech. Rev., 60, pp. 217-245.
3. Wang, S. S., and Choi, I., 1982, "Boundary-Layer Effects in Composite Lamiz nates: Part 1-Free-Edge Stress Singularities," ASME J. Appl. Mech., 49, pp. 541-548.
4. Williams, M. L., 1952, "Stress Singularities Resulting From Various Boundary Conditions in Angular Corners of Plates in Extension," ASME J. Appl. Mech., 19, pp. 526-528.
5. Genin, G. M., Kent, A., Birman, V., Wopenka, B., Pasteris, J. D., Marquez, P. J., and Thomopoulos, S., 2009, "Functional Grading of Mineral and Collagen in the Attachment of Tendon to Bone," Biophys. J., 97 [4 [, pp. 976-985.
6. Thomopoulos, S., Marquez, J. P., Weinberger, B., Birman, V., and Genin, G. M., 2006, "Collagen Fiber Orientation at the Tendon to Bone Insertion and Its Influence on Stress Concentrations," J. Biomech., 39 [10 [, pp. 1842-1851.
7. Thomopoulos, S., Williams, G. R., Gimbel, J. A., Favata, M., and Soslowsky, L. J., 2003, "Variation of Biomechanical, Structural, and Compositional Properties Along the Tendon to Bone Insertion Site," J. Orthop. Res., 21 [3 [, pp. 413-419.
8. Wopenka, B., Kent, A., Pasteris, J. D., Yoon, Y., and Thomopoulos, S., 2008, "The Tendon-to-Bone Transition of the Rotator Cuff: A Preliminary Raman Spectroscopic Study Documenting the Gradual Mineralization Across the Insertion in Rat Tissue Samples," Appl. Spectrosc., 62 [12 [, pp. 1285-1294.
9. Thomopoulos, S., Williams, G. R., and Soslowsky, L. J., 2003, "Tendon to Bone Healing: Differences in Biomechanical, Structural, and Compositional Properties Due to a Range of Activity Levels," ASME J. Biomech. Eng., 125 [1 [, pp. 106-113.
10. Galatz, L. M., Sandell, L. J., Rothermich, S. Y., Das, R., Mastny, A., Havlioglu, N., Silva, M. J., and Thomopoulos, S., 2006, "Characteristics of the Rat Supraspinatus Tendon During Tendon-to-Bone Healing After Acute Injury," J. Orthop. Res., 24 [3 [, pp. 541-550.
11. Carpenter, J. E., Thomopoulos, S., Flanagan, C. L., Debano, C. M., and Soslowsky, L. J., 1998, "Rotator Cuff Defect Healing: A Biomechanical and Histologic Analysis in an Animal Model," J. Shoulder Elbow Surg., 7 [6 [, pp. 599-605.
12. Galatz, L. M., Ball, C. M., Teefey, S. A., Middleton, W. D., and Yamaguchi, K., 2004, "The Outcome and Repair Integrity of Completely Arthroscopically Repaired Large and Massive Rotator Cuff Tears," J. Bone Joint Surg. Am., 86-A [2 [, pp. 219-224.
13. Galatz, L. M., Griggs, S., Cameron, B. D., and Iannotti, J. P., 2001, "Prospective Longitudinal Analysis of Postoperative Shoulder Function: A Ten-Year Follow-Up Study of Full-Thickness Rotator Cuff Tears," J. Bone Joint Surg. Am., 83-A [7 [, pp. 1052-1056.
14. Chue, C. H., and Liu, C. I., 2002, "Disappearance of Free-Edge Stress Singularity in Composite Laminates," Compos. Struct., 56 [1 [, pp. 111-129.
15. Wu, Z., 2004, "Design Free of Stress Singularities for Bi-Material Components," Compos. Struct., 65 [3-4 [, pp. 339-345.
16. Lekhnitskii, S. G., 1963, Theory of Elasticity of an Anisotropic Elastic Body, Holden-Day, New York.
17. Maganaris, C. N., and Paul, J. P., 1999, "In Vivo Human Tendon Mechanical Properties," J. Physiol., 521, pp. 307-313.
18. Weiss, J. A., Gardiner, J. C., and Bonifasi-Lista, C., 2002, "Ligament Material Behavior Is Nonlinear, Viscoelastic and Rate-Independent Under Shear Loading," J. Biomech., 35 [7 [, pp. 943-950.
19. Yin, L., and Elliott, D. M., 2004, "A Biphasic and Transversely Isotropic Mechanical Model for Tendon: Application to Mouse Tail Fascicles in Uniaxial Tension," J. Biomech., 37 [6 [, pp. 907-916.
20. Anderson, T. L., 2005, Fracture Mechanics: Fundamentals and Applications, CRC, Boca Raton, FL.
21. Gürdal, Z., Haftka, R. T., and Hajela, P., 1999, Design and Optimization of Laminated Composite Materials, Wiley-Interscience, New York.
22. Hurd, A. J., and Truman, K. Z., 2006, "Optimization Method of Pile Foundations," Solid Mechanics and Its Applications, Vol. 140, Springer, Amsterdam, The Netherlands, p. 653.
23. Jakiela, M. J., Chapman, C., Duda, J., Adewuya, A., and Saitou, K., 2000, "Continuum Structural Topology Design With Genetic Algorithms," Comput. Methods Appl. Mech. Eng., 186 [2-4 [, pp. 339-356.
24. Clark, J. M., and Harryman, D. T., II, 1992, "Tendons, Ligaments, and Capsule of the Rotator Cuff. Gross and Microscopic Anatomy," J. Bone Joint Surg. Am., 74 [5 [, pp. 713-725.
25. Curtis, A. S., Burbank, K. M., Tierney, J. J., Scheller, A. D., and Curran, A. R., 2006, "The Insertional Footprint of the Rotator Cuff: An Anatomic Study," Arthroscopy: J. Relat. Surg., 22 [6 [, pp. 603-609.
26. Dugas, J. R., Campbell, D. A., Warren, R. F., Robie, B. H., and Millett, P. J., 2002, "Anatomy and Dimensions of Rotator Cuff Insertions," J. Shoulder Elbow Surg., 11 [5 [, pp. 498-503.
27. Itoi, E., Berglund, L. J., Grabowski, J. J., Schultz, F. M., Growney, E. S., Morrey, B. F., and An, K. N., 1995, "Tensile Properties of the Supraspinatus Tendon," J. Orthop. Res., 13 [4 [, pp. 578-584.
28. Minagawa, H., Itoi, E., Konno, N., Kido, T., Sano, A., Urayama, M., and Sato, K., 1998, "Humeral Attachment of the Supraspinatus and Infraspinatus Tendons: An Anatomic Study," Arthroscopy: J. Relat. Surg., 14 [3 [, pp. 302-306.
29. Mochizuki, T., Sugaya, H., Uomizu, M., Maeda, K., Matsuki, K., Sekiya, I., Muneta, T., and Akita, K., 2008, "Humeral Insertion of the Supraspinatus and Infraspinatus. New Anatomical Findings Regarding the Footprint of the Rotator Cuff," J. Bone Joint Surg. Am., 90 [5 [, pp. 962-969.
30. Ruotolo, C., Fow, J. E., and Nottage, W. M., 2004, "The Supraspinatus Footprint: An Anatomic Study of the Supraspinatus Insertion," Arthroscopy: J. Relat. Surg., 20 [3 [, pp. 246-249.
31. Fung, Y. C., 1993, Biomechanics: Mechanical Properties of Living Tissues, Springer, New York.
32. Benjamin, M., Kumai, T., Milz, S., Boszczyk, B. M., Boszczyk, A. A., and Ralphs, J. R., 2002, "The Skeletal Attachment of Tendons-Tendon 'Entheses'," Comp. Biochem. Physiol. A, 133 [4 [, pp. 931-945.
33. Comsol, I., 2006, COMSOL Multiphysics User's Guide, COMSOL, Inc., Burlington, MA.
34. The Mathworks, Inc., 2010; see http://www.mathworks.com, Natick, MA.
35. Press, W. H., Teukolsky, S. A., Vetterling, W. T., and Flannery, B. P., 2007, Numerical Recipes: The Art of Scientific Computing, Cambridge University Press, Cambridge, UK.
36. Huang, J., Venkataraman, S., Rapoff, A. J., and Haftka, R. T., 2003, "Optimization of Axisymmetric Elastic Modulus Distributions Around a Hole for Increased Strength," Struct. Multidiscip. Optim., 25 [4 [, pp. 225-236.
37. Lipton, R., 2002, "Design of Functionally Graded Composite Structures in the Presence of Stress Constraints," Int. J. Solids Struct., 39 [9 [, pp. 2575-2586.
38. Wang, P., and Xu, L. R., 2006, "Convex Interfacial Joints with Least Stress Singularities in Dissimilar Materials," Mech. Mater., 38 [11 [, pp. 1001-1011.
39. Dines, J. S., Bedi, A., Elattrache, N. S., and Dines, D. M., 2010, "Single-Row Versus Double-Row Rotator Cuff Repair: Techniques and Outcomes," J. Am. Acad. Orthop. Surg., 18 [2 [, pp. 83-93.
40. Schneider, H., 1956, "Zur Struktur Der Sehnenansatzzonen," Anat. Embryol.(Berl), 119-5, pp. 431-456.
41. Birman, V., and Byrd, L. W., 2007, "Modeling and Analysis of Functionally Graded Materials and Structures," Appl. Mech. Rev., 60 [5 [, pp. 195-216.
42. Milz, S., Rufai, A., Buettner, A., Putz, R., Ralphs, J. R., and Benjamin, M., 2002, "Three-Dimensional Reconstructions of the Achilles Tendon Insertion in Man," J. Anat., 200 [2 [, pp. 145-152.
43. Birman, V., and Byrd, L. W., 2005, "Effect of Z-Pins on Fracture in Composite Cocured Double Cantilever Beams," J. Aerosp. Eng., 18 [1 [, pp. 51-59.
44. Byrd, L. W., and Birman, V., 2005, "The Estimate of the Effect of Z-Pins on the Strain Release Rate, Fracture and Fatigue in a Composite Co-Cured Z-Pinned Double Cantilever Beam," Compos. Struct., 68 [1 [, pp. 53-63.
45. Byrd, L. W., and Birman, V., 2006, "Effectiveness of Z-Pins in Preventing Delamination of Co-Cured Composite Joints on the Example of a Double Cantilever Test," Composites, Part B, 37 [4-5 [, pp. 365-378.
46. Freitas, G., Fusco, T., Campbell, T., Harris, J., and Rosenberg, S., 1997, "ZFiber Technology and Products for Enhancing Composite Design," p. 17.
47. Freitas, G., Magee, C., Dardzinski, P., and Fusco, T., 1994, "Fiber Insertion Process for Improved Damage Tolerance in Aircraft Laminates," J. Adv. Mater., 25 [4 [, pp. 36-43.
48. Tersoff, J., and Legoues, F. K., 1994, "Competing Relaxation Mechanisms in Strained Layers," Phys. Rev. Lett., 72 [22 [, pp. 3570-3573.
49. Suresh, S., and Mortensen, A., 1998, Fundamentals of Functionally Graded Materials: Processing and Thermomechanical Behaviour of Graded Metals and Metal-Ceramic Composites, IOM Communications Ltd., London.