Numerical analysis of the tool wear effect in the machining induced residual stresses

Simulation Modelling Practice and Theory

Volumn 19, Issue 2, 2011, Pages 872-886

  Munoz Sanchez A ^a   Canteli, J A ^a   Cantero, J L ^a   Miguelez M H ^a  

^a UNIVERSIDAD CARLOS III DE MADRID   (Spain)

Author keywords

Finite element; Numerical modelling; Orthogonal cutting; Residual stresses; Tool wear

Indexed keywords

AISI 316; COUPLED PHENOMENA; CUTTING PROCESS; DYNAMIC PROCESS; ELECTRO DISCHARGE MACHINING; EXPERIMENTAL STUDIES; EXPERIMENTAL TEST; FINITE ELEMENT; FINITE ELEMENT ANALYSIS; HIGH STRAINS; HIGH TEMPERATURE; MACHINED SURFACE; MANUFACTURING PROCESS; MESH DISTORTION; NUMERICAL MODELLING; NUMERICAL MODELS; ORTHOGONAL CUTTING; THERMO-MECHANICAL; TIME EFFICIENCIES; TOOL GEOMETRY; TOOL WEAR; TOOL-WEAR EFFECT;

CUTTING TOOLS; EQUIPMENT; MACHINING; NUMERICAL METHODS; RESIDUAL STRESSES; STRAIN RATE; WEAR OF MATERIALS;

FINITE ELEMENT METHOD;

EID: 78649970611     PISSN: 1569190X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.simpat.2010.11.011     Document Type: Article

References (40)

1. M. Mohammadpour, M.R. Razfar, and R. Jalili Saffar Numerical investigating the effect of machining parameters on residual stresses in orthogonal cutting Simulat. Modell. Pract. Theory 18 2010 378 389
2. H. Miguélez, R. Zaera, A. Molinari, R. Cheriguene, and A. Rusinek Residual stresses in orthogonal cutting of metals: the effect of thermomechanical coupling parameters and of friction J. Therm. Stresses 32 2009 1 20
3. W. Grzesik Advanced Machining Processes of Metallic Materials Theory Modelling and Applications 2008 Elsevier Science Amsterdam (Nederland) pp. 163-181
4. J.C. Outeiro, A.M. Dias, and I.S. Jawahir On the effects of residual stresses induced by coated and uncoated cutting tools with finite edge radii in turning operations Ann. CIRP 55 1 2006 111 116
5. C.R. Liu, and M.M. Barash Variables governing patterns of mechanical residual stress in a machined surface J. Eng. Ind. Trans. ASME 104 1982 257 264
6. M. Liu, J. Takagi, and A. Tsukuda Effect of tool nose radius and tool wear on residual stress distribution in hard turning of bearing steel J. Mater. Process. Technol. 150 2004 234 241
7. J.D. Thiele, S.N. Melkote, R.A. Peascoe, and T.R. Watkins Effect of cuttingedge geometry and workpiece hardness on surface residual stresses in finish hard turning of AISI 52100 steel J. Manuf. Sci. Eng. Trans. ASME 122 2000 642 649
8. R.M. Arunachalam, M.A. Mannan, and A.C. Spowage Surface integrity when machining age hardened inconel 718 with coated carbide cutting tools Int. J. Mach. Tools Manuf. 44 2004 1481 1491
9. L. Chen, T.I. El-Wardany, and W.C. Harris Modelling the effects of flank wear land and chip formation on residual stresses CIRP Ann. 53 2004 95 98
10. J. Hua, D. Umbrello, and R. Shivpuri Investigation of cutting conditions and cutting edge preparations for enhanced compressive subsurface residual stress in the hard turning of bearing steel J. Mater. Process. Technol. 171 2006 180 187
11. J.C. Outeiro, D. Umbrello, and R. M'Saoubi Experimental and numerical modelling of the residual stresses induced in orthogonal cutting of AISI 316 L steel Int. J. Mach. Tools Manuf. 46 14 2006 1786 1794
12. M N.A. Nasr, E.-G. Ng, and M.A. Elbestawia Modelling the effects of tool-edge radius on residual stresses when orthogonal cutting AISI 316 L Int. J. Machine Tools Manuf. 47 2007 401 411
13. M. Salio, T. Berruti, and G. De Poli Prediction of residual stress distribution alter turning in turbine disks Int. J. Mech. Sci. 48 2006 976 984
14. Y. Dogu, E. Aslan, and N. Camuscu A numerical model to determine temperature distribution in orthogonal metal cutting J. Mater. Process. Technol. 171 2006 1 9
15. L. Filice, D. Umbrello, F. Micari, and L. Settineri On the finite element simulation of thermal phenomena in machining processes Adv. Meth. Mater. Form. 2007 273 288
16. A.G. Mamalis, M. Horvath, A.S. Branis, and D.E. Manolakos Finite element simulation of chip formation in orthogonal metal cutting J. Mater. Process. Technol. 110 2001 19 27
17. D. Umbrello, L. Filice, S. Rizzuti, and F. Micari On the evaluation of the global heat transfer coefficient in cutting Int. J. Mach. Tools Manuf. 47 2007 1738 1743
18. Z.-C. Lin, Y.-Y. Lin, and C.R. Liu Effect of thermal load and mechanical load on the residual stress of a machined workpiece Int. J. Mech. Sci. 33 4 1991 263 278
19. M.N.A. Nasr, E.-G. Ng, and M.A. Elbestawi A modified time-efficient FE approach for predicting machining-induced residual stresses Finite Elem. Anal. Des. 44 2008 149 161
20. P.J. Arrazola, D. Ugarte, and X. Dominguez A new approach for the friction identification during machining through the use of finite element modelling Int. J. Mach. Tools Manuf. 48 2008 173 183
21. H. Miguélez, A. Muñoz-Sánchez, J.L. Cantero, and J.A. Loya An efficient implementation of boundary conditions in an ale model for orthogonal cutting J. Theor. Appl. Mech. 47 3 2009 1 20
22. T.D. Marusich, and M. Ortiz Modelling and simulation of high-speed machining Int. J. Numer. Meth. Eng. 38 1995 3675 3694
23. M.H. Dirikolu, T.H.C. Childs, and K. Maekawa Finite element simulation of chip flow in metal machining Int. J. Mech. Sci. 43 2001 2699 2713
24. T. Özel, E. Zeren, Finite element modelling of stresses induced by high speed machining with round edge cutting tools, in: Proceedings of IMECE'05, November 5-11, Orlando, Florida, 2005.
25. H. Miguélez, R. Zaera, A. Rusinek, A. Moufki, and A. Molinari Numerical modelling of orthogonal cutting: influence of cutting conditions and separation criterion J. Phys. IV 134 2006 417 422
26. O. Pantalé, J.-L. Bacaria, O. Dalverny, R. Rakotomalala, and S. Caperaa 2D and 3D numerical models of metal cutting with damage effects Comput. Meth. Appl. Mech. Eng. 193 2004 4383 4399
27. Hibbit Karlson and Sorensen Inc., ABAQUS User's Manual 6.4-1, 2003.
28. G. Barrow A review of experimental and theoretical techniques for assessing cutting temperatures Ann. CIRP 22 2 1973 203 211
29. C. Maranhão, and J. Paulo Davim Finite element modelling of machining of AISI 316 steel: numerical simulation and experimental validation Simulat. Modell. Practice Theory 18 2010 139 156
30. Z.C. Lin, and S.Y. Lin A couple finite element model of thermo-elastoplastic large deformation for orthogonal cutting ASME J. Eng. Indus. 114 1992 218 226
31. G.R. Johnson, W.H. Cook, A constitutive model and data for metals subjected to large strains, high strain rate and temperature, in: Proceedings of the International Symposium of Ballistics, 1983, pp. 541-547.
32. D. Umbrello, R. M'Saoubi, and J.C. Outeiro The influence of Johnson-Cook material constants on finite element simulation of machining of AISI 316 L steel Int. J. Mach. Tools Manuf. 47 2007 462 470
33. N. Tounsi, J. Vincenti, A. Otho, and M.A. Elbestawi From the basics of orthogonal metal cutting toward the identification of the constitutive equation Int. J. Mach. Tools Manuf. 42 2 2002 1373 1383
34. D.Y. Jang, T.R. Watkins, K.J. Kozaczek, CR. Hubbard, and O.B. Cavin Surface residual stresses in machined austenitic stainless steel Wear 194 1996 168 173
35. A. Muñoz-Sánchez, Análisis experimental y numérico de las tensiones residuales debidas a mecanizado en aceros inoxidables austeníticos, Tesis Doctoral, 2008 (in Spanish).
36. http://www.ideko.es/.
37. I.C. Noyan, and J.B. Cohen Residual Stress-measurement by Diffraction and Interpretation 1987 Society for Experimental Mechanics, Springer-Verlag New York
38. J.C. Outeiro, K.C. Ee, O.W. Dillon Jr., P.C. Wanigarathne, I.S. Jawahir, Some observations on comparing the modeled and measured residual stresses on the machined surface induced by orthogonal cutting of AISI 316 L steel, in: Proceeding of the 9th CIRP International Workshop on Modeling of Machining Operations, Bled, Slovenia, 2006.
39. I. Korkut, M. Kasap, I. Ciftci, and U. Seke Determination of optimum cutting parameters during machining of AISI 304 austenitic stainless steel Mater. Des. 25 2004 303 305
40. M.H. Miguélez, R. Zaera, A. Molinari, A. Muñoz- Sánchez, The influence of cutting speed in the residual stresses induced by HSM in AISI 316 L steel, in: 12th CIRP Conference on Modelling of Machining Operations, San Sebastián, España, 7-8 May, 2009.