Impact of higher fidelity models on simulation of active aerodynamic load control for fatigue damage reduction

48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition

Volumn , Issue , 2010, Pages

  Resor, Brian ^a   Wilson, David ^a   Berg, Dale ^a   Berg, Jonathan ^a   Barlas, Thanasis ^b   Van Wingerden, Jan Willem ^c   Van Kuik, Gijs ^b  

^a SANDIA NATIONAL LABORATORIES   (United States)

^b DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

^c DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

AERODYNAMIC CONTROL; DAMAGE REDUCTION; LOAD CONTROL; MODEL VERIFICATION; RESEARCH ACTIVITIES; RESEARCH EFFORTS; SANDIA NATIONAL LABORATORIES; SIMULATION CAPABILITY; STRUCTURAL MODELS; UNSTEADY AERODYNAMICS; WIND ENERGY RESEARCH; WIND INDUSTRY;

AERODYNAMIC LOADS; AERODYNAMICS; AEROSPACE ENGINEERING; COMPUTER SIMULATION; FATIGUE DAMAGE; LOADS (FORCES); MODEL STRUCTURES; RESEARCH; TURBINES; TURBOMACHINE BLADES; WETLANDS; WIND POWER;

AEROELASTICITY;

EID: 78649897907     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (30)

1. T.K. Barlas and G.A.M. vanKuik, Review of state of the art in smart rotor control research for wind turbines, Prog Aerospace Sci 46 (2010) 1-27.
2. Barlas, T.K., and van Kuik, G.A.M., "Aeroelastic Modelling and Comparison of Advanced Active Flap Control Concepts for Load Reduction on the Upwind 5MW Wind Turbine". European Wind Energy Conference, Marseille, France, 16-19 March, 2009.
3. Wilson, D.G., Berg, D.E., Barone, M.F., Berg, J.C., Resor, B.R., and Lobitz, D.W., "Active Aerodynamic Blade Control Design for Load Reduction on Large Wind Turbines" European Wind Energy Conference, Marseille, France, 26-19 March, 2009.
4. Berg, D.E., Wilson, D.G., Barone, M.F., Berg, J.C., Resor, B.R., Paquette, J.A., and Zayas, J.R., "The Impact of Active Aerodynamic Load Control on Fatigue and Energy Capture at Low Wind Speed Sites", European Wind Energy Association, Marseille, France, 16-19 March, 2009.
5. Berg, D.E., Wilson, D.G., Resor, B.R., Barone, M.F., Berg, J.C., Kota, S. and Ervin, G., "Active Aerodynamic Blade Load Control Impacts on Utility-Scale Wind Turbines", WINDPOWER 2009, Chicago, Illinois, 5-7 May, 2009.
6. Wilson, Berg, D.E., D.G., Resor, B.R., Barone, M.F., and Berg, J.C., "Combined Individual Pitch Control and Active Aerodynamic Load Controller Investigation for the 5MW UpWind Turbine, WINDPOWER 2009, Chicago, Illinois, 5-7 May, 2009.
7. NWTC Design Codes (FAST by Jason Jonkman), http://wind.nrel.gov/ designcodes/simulators/fast/. Last modified 12-August-2005; accessed 12-August-2005.
8. NWTC Design Codes (Aerodyn by Dr. David Laino), http://wind.nrel.gov/ designcodes/simulators/aerodyn/. Last modified 05-July-2005; accessed 05-July-2005.
9. MatLab/Simulink - Matlab version 7.8 release 2009a and Simulink version 7.3 release 2009a. The Mathworks Inc.
10. IEC TC88-MT1 (ed.). "IEC 61400-1 Ed.3: Wind Turbines - Part 1: Design Requirements", International Electrotechnical Commission, Geneva, 2005.
11. NWTC Design Codes (TurbSim by Neil Kelley and Bonnie Jonkman), http://wind.nrel.gov/designcodes/preprocessors/turbsim/. Last modified 11-September-2008; accessed 11- September-2008.
12. NWTC Design Codes (Crunch by Marshall Buhl). http://wind.nrel.gov/ designcodes/postprocessors/crunch/. Last modified 01-April-2008; accessed 01-April-2008.
13. Drela, M. and Giles, M.B. "Viscous-inviscid analysis of transonic and low Reynolds number airfoils, AIAA J, 25(10):1347-1355, 1987.
14. Lackner, M. and van Kuik, G., "A Comparison of Smart Rotor Control Approaches using Trailing Edge Flaps and Individual Pitch Control", 47th AIAA Aerospace Sciences Meeting and Exhibit, Orlando, Florida, 5-8 January, 2009.
15. NWTC Design Codes (AirfoilPrep by Dr. Craig Hansen). http://wind.nrel. gov/designcodes/preprocessors/airfoilprep/. Last modified 16-January-2007; accessed 16-January- 2007.
16. Viterna, L.A. and Corrigan, R.D., "Fixed Pitch Rotor Performance of Large Horizontal-Axis Wind Turbines", Proceedings of a Workshop on Large Horizontal-Axis Wind Turbines Held in Cleveland, Ohio, July 28-30, 1981, Robert Thresher, Editor, SERI/CP-635-1273 (DOE Publication CONF-810752, NASA Conference Publication 2230). 1982, pp. 69-85.
17. Du, Z, and Selig, M.S., "A 3-D stall-delay model for horizontal axis wind turbine performance prediction", 36th Aerospace Sciences Meeting and Exhibit, Reno, NV, 12-15 January, 1998.
18. Eggers, A.J., Jr., Chaney, K., Digumarthi, R., "An Assessment of Approximate Modeling of Aerodynamic Loads on the UAE Rotor", 41st Aerospace Sciences Meeting and Exhibit, Reno, NV, 6-9 January, 2003.
19. Snel H. Survey of induction dynamics modelling within BEM-like codes: Dynamic inflow and yawed flow modelling revisited. Proceedings of the 39th AIAA/ASME, Reno, NV, USA, 2001.
20. Leishman J G. Unsteady lift of a flapped airfoil by indicial concepts. Journal of Aircraft 1994; 31: 288-297.
21. Leishman J G. Principles of helicopter aerodynamics, 2nd edition, Cambridge aerospace series, 2006.
22. Theodorsen T. General theory of aerodynamic instability and the mechanism of flutter. NACA Technical Report 497, 1935.
23. Wagner H. Über die entsehung des dynamischer auftriebes von tragflügeln. Z. Angew. Math. U. Mech., Vol. 118, 1982; 393-409.
24. Bisplinghoff R L, Ashley H, Halfman R L. Aeroelasticity. Addison-Wesley Publishing Co., 1955.
25. Molennar D-P. Cost-effective design and operation of variable speed wind turbines, PhD Thesis. Delft University Press, 2003.
26. Holierhoek J G. Aeroelasticity of large wind turbines. PhD Thesis. Delft University Press, 2008.
27. Shabana A A. Flexible multibody dynamics: Review of past and recent developments. Multibody system dynamics 2001; 1: 189-222.
28. Rauh J, Schiehlen W. Various approaches for the modeling of flexible robot arms. Proceedings of the Euromech-Colloquium 219 on refined dynamical theories of beams, plates and shells and their applications.1987; 420-429.
29. Jonkman, J. Butterfield, S., Musial, W., and Scott, G., "Definition of a 5-MW Reference Wind Turbine for Offshore System Development", National Renewable Energy Laboratory, NREL/TP- 500-38060, February 2009.
30. Meng, F., Masarati, P., and van Tooren, M. "Free/Open Source Multibody and Aerodynamic Software for Aeroelastic Analysis of Wind Turbines," Proceedings of the 47th Aerospace Sciences Meeting and Exhibit, Orlando, FL, 5-8 January 2009.