Calibration and validation of various commercial particle number measurement systems

SAE Technical Papers

Volumn , Issue , 2009, Pages 512-530

  Giechaskiel, Barouch ^a   Carriero, Massimo ^a   Martini, Giorgio ^a   Krasenbrink, Alois ^a   Scheder, Daniel ^b  

^a JOINT RESEARCH CENTRE   (Italy)

^b Horiba Europe GmbH   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

AEROSOLS; AUTOMOBILE MANUFACTURE; CALIBRATION; EFFICIENCY; LAWS AND LEGISLATION;

CALIBRATION AND VALIDATIONS; CALIBRATION/VALIDATION; COMMERCIAL INSTRUMENTS; CONCENTRATION RANGES; LIGHT-DUTY VEHICLE EMISSIONS; MEASUREMENT OF PARTICLES; PARTICLE NUMBER CONCENTRATION; POLYDISPERSE AEROSOLS;

DILUTION;

EID: 78649678194     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2009-01-1115     Document Type: Conference Paper

References (21)

1. European Commission of the European Communities Implementing and Amending Regulation (EC) No 715/2007
2. GRPE (2007). ECE/TRANS/WP.29/GRPE/2007/8-(UK) Proposal for draft Supplement 7 to the 05 series of amendments to Regulations No. 83 (Emissions of M1 and N1 categories of vehicles). http://www.unece.org/trans/doc/2007/wp29grpe/ ECE-TRANS-WP29-GRPE-2007-08e.pdf
3. Andersson J., Giechaskiel B., Munoz-Bueno R., Dilara P., (2007). Particle Measurement Programme (PMP): Light-duty Inter-laboratory Correlation Exercise (ILCE-LD)-Final report (EUR 22775 EN) GRPE-54-08-Rev.1,. http://www.unece.org/ trans/main/wp29/wp29wgs/wp29grpe/grpeinf54.html
4. Giechaskiel B., Dilara P., Andersson J., (2008). Particle Measurement Programme (PMP) Light-Duty Inter-laboratory Exercise: Repeatability and Reproducibility of the Particle Number Method. Aerosol Sci. Technology, 42, 528-543 (Pubitemid 351919834)
5. Giechaskiel B., Dilara P., Sandbach E., Andersson J., (2008). Particle Measurement Programme (PMP) Light-Duty Inter-laboratory Exercise: Comparison of Different Particle Number Measurement Systems. Measurement Sci. Technology, 19, 095401
6. Sandbach E., Marshall I., (2007). Volatile Particle Remover Calibration and Validation Procedures. http://www.unece.org/trans/doc/2008/wp29grpe/PMP-21- 06e.pdf
7. Giechaskiel B., Alessandrini S., Forni F., Carriero M., Krasenbrink A., Spielvogel J., Gerhart C., Wang X., Horn H.G., Southgate J., Jörgl H., Winkler G., Jing L., Kasper M., (2008). Calibration of PMP Condensation Particle Number Counters: Effect of Material on Linearity and Counting Efficiency. EU report 23495
8. Marshall I., Sandbach E., (2007). Particle Number Counter Calibration/Validation Procedures. http://www.unece.org/trans/doc/2008/wp29grpe/ PMP-21-07e.pdf
9. Giechaskiel B., Ntziachristos L., Samaras Z., (2004). Calibration and Modeling of Ejector Dilutors for Automotive Exhaust Sampling, Measurement Science & Technology 15: 1-8
10. Kasper M., (2008). Characterisation of the Second Generation PMP "Golden Instrument". SAE 2008-01-1177
11. Wei Q., Oestergaard K., Porter S., Asano I, Adachi M., Rahman M., (2006). Real-time Measuring System for Engine Exhaust Solid Particle Number Emission-Design and Performance. SAE 2006-01-0864
12. Wei Q., Oestergaard K., Porter S., Asano I., Masayuki A., Rahman M., Kousaka T., Goto Y., (2006). Real-time Measuring System for Engine Exhaust Solid Particle Number Emission-Performance and Vehicle testing. SAE 2006-01-0865
13. Giechaskiel B., Alessandrini S., Forni F., Martinez-Lozano P., Lesueur D., Carriero M., &, Martini G., (2008). Particle Measurement Programme (PMP): Heavy-Duty (HD) inter-laboratory exercise: Exploratory work at JRC (Oct '07-Feb '08). EU report 23426
14. Wei, Q., Akard, M., Asano, I., and, Rahman, M., "Penetration Calibration and Verification for the Solid Particle Counting System with Polydisperse and Monodisperse Particles," SAE Int. J. Fuels Lubr. 1 (1): 593-602, 2008.
15. Ntziachristos L., Giechaskiel B., Pistikopoulos P., Samaras Z., Mathis U., Mohr M., Ristimäki J., Keskinen J., Mikkanen P., Casati R., Scheer V., and, Vogt R., (2004). Performance and Evaluation of a Novel Sampling System for Exhaust Particle Characterization, SAE 2004-01-1439
16. Ntziachristos L., Giechaskiel B., Pistikopoulos P., Samaras Z., (2005). Comparative Assessment of Two Different Sampling Systems for Particle Emission Type-Approval Measurements, SAE 2005-01-0198
17. Wang X., Horn H., (2008). Flow rate correction for the engine exhaust condensation particle counter. http://www.tsi.com/uploadedFiles/Product- Information/Literature/Application-Notes/EECPC-001-Flow-Correction-RevA.pdf
18. Biskos G., Malinowski A., Russell L. M., Buseck P. R., Martin S. T., (2006). Nanosize effect on the deliquescence and the efflorescence of sodium chloride particles. Aerosol Sci. Technology, 40, 97-106 (Pubitemid 43220816)
19. Giechaskiel B., Ntziachristos L., Samaras Z., Casati R., Scheer V., Vogt R., (2005). Formation Potential of Vehicle Exhaust Nucleation Mode Particles On-Road and in the Laboratory, Atmospheric Environment, 39, 3191-3198
20. Giechaskiel B., Ntziachristos L., Samaras Z., Casati R., Volker S., Rainer V., (2007). Effect of speed and speed transition on the formation of nucleation mode particles from a light duty diesel vehicle. SAE 2007-01-1110
21. Giechaskiel B., Munoz-Bueno R., Rubino L., Manfredi U., Dilara P., De Santi G., Andersson J., (2007). Particle Measurement Programme (PMP): Particle Size and Number Emissions Before, During and After Regeneration Events of a Euro 4 DPF Equipped Light-duty Diesel Vehicle, SAE 2007-01-1944