Power Distribution System Reliability: Practical Methods and Applications

Power Distribution System Reliability: Practical Methods and Applications

Volumn , Issue , 2009, Pages 1-531

  Chowdhury, Ali A ^a   Koval, Don O ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 78649567399     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470459355     Document Type: Book

References (217)

1. R. Billinton and R. N. Allan, Reliability Evaluation of Power Systems, 2nd edition, Plenum Press, New York, 1996.
2. J. Endrenyi, Reliability in Electric Power Systems, JohnWiley & Sons, Ltd., Chichester, 1978.
3. T. Gönen, Electric Power Distribution System Engineering, McGraw Hill, New York, 1986.
4. J. J. Burke, Power Distribution Engineering: Fundamentals and Applications, Marcel Dekker, Inc., New York, 1994.
5. R. E. Brown, Electric Power Distribution Reliability, Marcel Dekker, Inc., New York, 2002.
6. G. J. Anders, Probability Concepts in Electric Power Systems, John Wiley & Sons, Inc., New York, 1990.
7. R. E. Walpole and R. H. Myers, Probability and Statistics for Engineers and Scientists, 3rd edition, Macmillan Publishing Company, New York, 1985.
8. R. Langley, Practical Statistics, revised edition, Dover Publications, Inc., New York, 1970.
9. J. Mandel, The Statistical Analysis of Experimental Data, Dover Publications, Inc., New York, 1984.
10. R. E. Barlow and F. Proschan, Statistical Theory of Reliability and Life Testing: Probability Models, Holt, Rinehart and Winston, Inc., New York, 1975.
11. J. Endrenyi, Reliability in Electric Power Systems, JohnWiley & Sons, Ltd., Chichester, 1978.
12. R. Ramakumar, Engineering Reliability: Fundamentals and Applications, Prentice-Hall, Inc., Upper Saddle, 1993.
13. T. Gönen, Electric Power Distribution System Engineering, McGraw Hill, New York, River, NJ, 1986.
14. R. Billinton and R. N. Allan, Reliability Evaluation of Engineering Systems: Concepts and Techniques, 2nd edition, Plenum Press, New York, 1992.
15. N. R. Mann, R. E. Schafer, and N. D. Singpurwalla, Methods for Statistical Analysis of Reliability and Life Data, John Wiley & Sons, Inc., New York, 1977.
16. R. Porkess (ed.), The Harper Collins Dictionary of Statistics, Harper Collins Publishers, New York, 1991.
17. D. J. Koosis, Statistics a Self-Teaching Guide, John Wiley & Sons, Inc., New York, 1997.
18. S. K. Kachigan, Multivariate Statistical Analysis: A Conceptual Introduction, 2nd edition, Radius Press, New York, 1991.
19. R. E. Walpole and R. H. Myers, Probability and Statistics for Engineers and Scientists, 3rd edition, Macmillan Publishing Company, New York, 1985.
20. R. Langley, Practical Statistics, revised edition, Dover Publications, Inc., New York, 1970.
21. J. Mandel, The Statistical Analysis of Experimental Data, Dover Publications, Inc., NewYork, 1984.
22. R. E. Walpole and R. H. Myers, Probability and Statistics for Engineers and Scientists, 3rd edition, Macmillan Publishing Company, New York, 1985.
23. A. M. Breipohl, Probabilistic Systems Analysis, John Wiley & Sons, Inc., New York, 1970.
24. A. W. Drake, Fundamentals of Applied Probability Theory, McGraw-Hill, New York, 1967.
25. A. M. Neville and J. B. Kennedy, Basic Statistical Methods for Engineers and Scientists, International Textbook Co., Scranton, PA, 1964.
26. IEEE Standard 1366-2003, IEEE Guide for Electric Power Distribution Reliability Indices, 2003.
27. 2001 Annual Service Continuity Report on Distribution System Performance in Electrical Utilities, Canadian Electricity Association, Montreal, Canada.
28. REA Bulletin 161-1, March 1972, Interruption Reporting and Service Continuity Standards for Electric Distribution Systems.
29. R. Porkess, The Harper Collins Dictionary of Statistics, Harper Perennial, 1991.
30. R. E. Walpole and R. H. Myers, Probability and Statistics for Engineers and Scientists, 3rd edition, Macmillan Publishing Company, 1985.
31. A. Papoulis, Probability, Random Variables and Stochastic Processes, McGraw-Hill. 1965.
32. W. Feller, An Introduction to Probability Theory and Its Applications, Vol. 1, JohnWiley, 1968.
33. P. L. Meyer, Introductory Probability and Statistical Applications, Addison-Wesley, 1965.
34. M. Kurtz, Engineering Economics for Professional Engineers' Examinations, 2nd edition, McGraw-Hill Book Company, Inc., 1975.
35. H. G. Stoll, Least Cost Electric Utility Planning, John Wiley & Sons, 1989
36. C. V. Jones, Financial Risk Analysis of Infrastructure Debt: The Cost of Water and Power Investments, Quorum Books, 1991.
37. G.W. Smith, Engineering Economy: Analysis of Capital Expenditures, 2nd edition, The Iowa State University Press, 1973.
38. T. W. Berrie, Electricity Economics and Planning, Peter Peregrinus Ltd., 1992.
39. D. G. Newman, Engineering Economic Analysis, Engineering Press, Inc., 1983.
40. IEEE Tutorial Course, Engineering Economic Analysis: Overview and Current Applications, 91EH0345-9-PWR, 1991.
41. N. G. Mankiw, Principles of Economics, 2nd edition, Harcourt College Publishers, 2001.
42. R. L. Miller, Economics Today, 9th edition, Addison-Wesley Educational Publishers, Inc., 1997.
43. P. A. Jensen and M. Bellemore, An algorithm to determine the reliability of a complex network, IEEE Transactions on Reliability, R-25, 1976, 169-174.
44. J. B. Fussell and W. E. Vessly, A new methodology for obtaining cut sets for fault trees, Transactions of the American Nuclear Society, 15, 1972.
45. K. C. Kapur and L. R. Lamberson, Reliability in Engineering Design, JohnWiley, Inc., 1977.
46. S. Garriba, P. Mussion, F. Naldi, G. Reina, and G. Volta, Efficient construction of minimal cut sets from fault trees, IEEE Transactions on Reliability, R-26, 1977, 88-93.
47. M. L. Shooman, Probabilistic Reliability, An Engineering Approach, McGraw-Hill, 1968.
48. G. J. Hahn and S. S. Shapiro, Statistical Models in Engineering, John Wiley, Inc., 1967.
49. E. Hansler, A fast recursive algorithm to calculate the reliability of a communication network, IEEE Transactions on Communications, COM-20, 1972, 637-640.
50. C. Singh and R. Billinton, A new method to determine the failure frequency of a complex system, Microelectronics and Reliability, 12, 1973, 459-465.
51. A. C. Nelson, J. R. Batts, and R. L. Beadles, A computer program for approximating system reliability, IEEE Transactions on Reliability, R-19, 1970, 61-65.
52. R. N. Allan, R. Billinton, and M. F. De Olivera, An efficient algorithm for deducing the minimal cuts and reliability indices of a general network configuration, IEEE Transactions on Reliability, R-25, 1976, 226-233.
53. R. J. Ringlee, P. Albrecht, R. N. Allan, et al., Bulk power system criteria and indices: trends and future needs, IEEE Transactions on Power Systems, 9 (1), 1994, 181-190.
54. G. Toleffson, G. Wacker, and R. Billinton, NSERC cost of interruption study preliminary results, CEA Transactions, 31, 1992.
55. M. J. Sullivan, B. N. Suddeth, T. Vardell, and A. Vojdani, Interruption costs, customer satisfaction and expectations for service reliability, IEEE Transactions on Power Systems, 11 (2), 1996, 989-995.
56. B. L. Silverstein and D. M. Porter, Contingency ranking for bulk system reliability criteria, IEEE/PES Transaction on Power Systems, 7 (3), 1992, 956-964.
57. A. A. Chowdhury, J. Voss, K. Berg, and D. Frehlich, Development of consistent transmission outage data reporting and analysis procedures by Alberta utilities, CEA Transactions, 33, 1994.
58. A. A. Chowdhury, C. F. Fuchshuber, and R. Billinton, Bulk system delivery point performance reporting at Alberta Power Limited, CEA Transactions, 32, 1993.
59. R. Billinton and L. Goel, Electric service reliability worth evaluation in power systems, CEA Transactions, 31, 1992.
60. A. P. Sanghvi, Economic Penalties, Including Customer Costs, for Loss of Service Continuity, Report for CEA, SD-273, July 1991.
61. E. G. Neudorf, et al., Cost-benefit analysis of power system reliability: two utility case studies, IEEE/PES Transactions on Power Systems, 10 (13), 1995, 1667-1675.
62. Electric Power Research Institute, Cost-Benefit Analysis of Power System Reliability: Determination of Interruption Costs-Vol. 1: Measurement Methods and Potential Applications in Reliability Cost-Benefit Analysis, EPRI IL-6791, Palo Alto, CA, April 1990.
63. A. K. Ayoub and A. D. Patton, A frequency and duration method for generating system reliability evaluation, IEEE Transactions on Power Apparatus and Systems, 95 (6) 1976, 1929-1933.
64. R. Billinton and R. N. Allan, Reliability Evaluation of Power Systems, Plenum Publication Corp., 1983.
65. J. Endrenyi, Reliability Modeling in Electric Power Systems, John Wiley & Sons, 1978.
66. W. H. Dickinson, et al., Fundamentals of reliability techniques as applied to industrial power systems, Conference Record of the 1971 IEEE I&CPS Technical Conference, pp. 10-31.
67. D. P. Gaver, F. E. Montmeat and A. D. Patton, Power system reliability, I-Measures of reliability and methods of calculation, IEEE Transactions on Power Apparatus and Systems, 1964, 727-737.
68. D. O. Koval and R. Billinton, Evaluation of distribution circuit reliability, Transactions on Power Apparatus and Systems, 1978, 1-9, Paper No. F77-067-2
69. D. O.Koval, Distribution substation reliability, Canadian Electrical Association (CEA), CEA Engineering and Operating Division Transactions, 19, 1979/1980, 1-20.
70. D. O. Koval and R. Billinton, Statistical and analytical evaluation of the duration and cost of consumer's interruptions, Paper NoA79-057-1, IEEE 1979 Winter Power Meeting, NewYork, NY.
71. R. J. Ringlee and S. D. Goode, On procedures for reliability evaluation of transmission systems, IEEE Transactions on Power Apparatus and Systems, 1970, 527-537.
72. M. J. Sullivan, T. Vardell, B. N. Sudeth and A. Vojdani, Interruption costs, customer satisfaction and expectations for service reliability, Paper no. 95 SM 572-8 PWRS, IEEE-PES Summer Power Meeting, Portland, OR, July 24-27, 1995.
73. W. H. Dickinson, Report of reliability of electrical equipment in industrial plants, AIEE Transactions, Part II, 1962, 132-151.
74. D. W. McWilliams, A. D. Patton and C. R. Heising, Reliability of electrical equipment in industrial plants-comparison of results from 1959 and 1971 survey, IEEE-I&CPS Technical Conference Record, 74CH0855-71A, Denver, CO, June 2-6, 1974, pp. 105-115.
75. P. O'Donnell, Report of large motor reliability survey of industrial plants and commercial buildings, IEEE Transactions on Industry Applications, Parts 1 and 2, July/August, 1985, 853-872; Part 3, January/February 1987, pp. 153-158 (See Appendix H, IEEE Standard 493-1997).
76. D. J. Love, Reliability of utility supply configurations for industrial power systems, IEEE Transactions on Industry Applications, 30 (5), 1994, 1303-1308.
77. L. M. Shooman, Probabilistic Reliability: An Engineering Approach, McGraw-Hill, 1968.
78. C. Singh, On the behavior of failure frequency bounds, IEEE Transactions on Reliability, R-26, 1977, 63-66.
79. C. Singh and R. Billinton, System Reliability Modeling and Evaluation, Hutchinson Educational, 1977.
80. IEEE Standard 493-1997 (IEEE Gold Book), IEEE Recommended Practice for Design of Reliable Industrial and Commercial Power Systems, The Institute of Electrical and Electronics Engineers, Inc. New York, NY, USA.
81. Canadian Electricity Association, Guide to Value-Based Distribution Reliability Planning, CEA Report 273 D 887, Vol. I, January 1996.
82. IEEE Standard 493-1990, Design of Reliable Industrial and Commercial Power Systems, IEEE Gold Book, 1990.
83. IEEE Standard 1366-2003, IEEE Guide for Electric Power Distribution Reliability Indices, 2003.
84. W. F. Horton, S. Goldberg, and V. Backman, The failure rates of underground distribution system components, NAPS Proceedings, Auburn, AL, October 15-16, 1990, pp. 306-316.
85. L. H. Stember, M.M. Epstein, G. B. Gaines, G. C. Derringers, and R. E. Thomas, Analysis of field failure data on HMWPE and XLPE-insulated high voltage distribution cable, IEEE Transactions on Power Apparatus and Systems, 104 (8), 1985, 1979-1985.
86. S. Goldberg and W.F. Horton, Analysis of feeder service reliability using component failure rates, IEEE Transactions on Power Delivery, 2 (4), 1987.
87. R. Billinton and R. N. Allan, Reliability Evaluation of Power Systems, PlenumPress, NewYork, 1996.
88. A. A. Chowdhury and D. O. Koval, Value-based distribution system reliability planning, IEEE/IAS Transactions, 4, 1996, 2359-2365.
89. U.S. Department of Energy The National Electric Reliability Study: Executive Summary, DOE/EP-0003 Dist. Category UC-97C, April 1981.
90. Westinghouse Electric Corporation Development of Distribution System Reliability and Risk Analysis Models, EPRI, EL-2018, August 1981.
91. IEEE Standard 1366-2003 Guide for Electric Power Distribution Reliability Indices, November 2003.
92. M. H. J. Bollen, Understanding Power Quality Problems: Voltage Sags and Interruptions, IEEE Press, New York, 2000.
93. Canadian Electricity Association Distribution System Reliability Statistics, Research and Development Report number 148 D255, October 1984.
94. A. A. Chowdhury and D. O. Koval Distribution system reliability: historical assessment, G. E. Lasker (ed.), Advances in Power System Research, Vol. 2, International Institute for Advancement Studies in Systems Research and Cybernetics, Baden, Germany, 1997.
95. R. Billinton and J. E. Billinton, Distribution system reliability indices, IEEE Transactions on Power Delivery, 4 (1), 1989, 561-568.
96. R. E. Brown, Electric Power Distribution Reliability, Marcel Dekker, New York, 2004.
97. Edison Electric Institute, 2004 Reliability Report, May 2005.
98. Canadian Electricity Association, 2005 Annual Service Continuity Report on Distribution System Performance in Canadian Electrical Utilities, May 2005.
99. G. F. L. Dixon and H. Hammersely, Reliability and its costs on distribution systems, International Conference on Reliability of Power Supply Systems, IEE Conference Publication No. 148, 1977.
100. M. Munasinghe and M. Gellerson, Economic criteria for optimizing power system reliability levels, Bell Journal of Economics, Spring 1979, 353-365.
101. Electric Power Research Institute, Cost-Benefit Analysis of Power System Reliability: Determi-nation of Interruption Costs. Vol. 1: Measurement Methods and Potential Applications in Reliability Cost-Benefit Analysis, EPRI IL-6791, Palo Alto, CA, April 1990.
102. M. J. Sullivan, B. N. Suddeth, T. Vardell, and A. Vojdani, Interruption costs, customer satisfaction and expectations for service reliability, IEEE Transactions on Power Systems, 11 (2), 1996, 989-995.
103. Canadian Electrical Association, Economic Penalties Including Customer Costs for Loss of Service Continuity, Research and Development Report No. SD-273, July 1991.
104. R. Billinton and J. E. Billinton, Distribution system reliability indices, IEEE Transactions of Power Delivery, 4 (1), 1989, 561-586.
105. Canadian Electrical Association, 1993 Annual Service Continuity Report on Distribution System Performance in Canadian Electric Utilities, May 1992.
106. P. Save and T. Velarde, Incorporation of performance based rating (PBR) incentives in probabilistic transmission planning criteria, in Proceedings of the 5th International Conference on the Probabilistic MethodsApplied to Power Systems (PMAPS'97), Vancouver, BC, Canada, September 21-25, 1997, pp. 17-24.
107. Victorian Distribution Code, Section 19, Interruption to Supply, 19.1(a) and (b), Victoria, Australia.
108. P. Lyons and G. Nourbakhs, Applied subtransmission and distribution reliability assessment of SEQEB network in Queensland, Proceedings of 1997 AUPEC Conference, Sydney, Australia, 1997.
109. L. Goel and R. Billinton, A procedure for evaluating interrupted energy assessment rates in an overall electric power system, IEEE Transactions on Power Systems, 8 (3), 1993, 929-936.
110. G.Wacker, R. K. Subramaniam, and R. Billinton, Using cost of electric service interruption surveys in the determination of a composite customer damage function, in Presented at the IASTEDEnergy, Power and Environmental Systems Conference, San Francisco, CA, June 4-6, 1984.
111. G. Tollefson, G. Wacker, R. Billinton, E. Chan and J. Awaya, NSERC customer cost of interruption study preliminary results, CEA Transactions, 31, 1992.
112. R. Billinton, G. Wacker, G. Tollefson, J. Awaya, and E. Chan, Customer requirements for electric service reliability, CEA Transactions, 31, 1992.
113. C. A. Warren, The impact of regulatory policy on reliability, Transmission & Distribution World, December 2003, 16-23.
114. IEEE Standard 1366, Guide for Electric Power Distribution Reliability Indices, 2003.
115. Canadian Electricity Association, 2001 Annual Service Continuity Report on Distribution System Performance in Electrical Utilities, May 2002.
116. C. A. Warren and M. J. Adams, Reliability on the regulatory horizon, in IEEET&DConference and Exposition, Atlanta, GA, October 2001 (CD-ROM).
117. R. E. Brown and J. J. Burke, Managing the risk of performance based rates, IEEE Transactions on Power Systems, 15 (2), 2000, 893-898.
118. P. Save and T. Velarde, Incorporation of performance based ratemaking (PBR) incentives in probabilistic transmission planning criteria, in Proceedings of the 5th International Conference on Probabilistic Methods Applied to Power Systems, Vancouver, Canada, September 21-25, 1997, pp. 17-23.
119. Ontario Energy Board Electricity Distribution Rate Handbook, March 2000.
120. C. A. Warren, The impact of regulatory policy on reliability, Transmission and Distribution World, December 2003, 16-23.
121. C. A. Warren and M. J. Adams, Reliability on the regulatory horizon, in IEEET&DConference and Exposition, Atlanta, GA, October 2001 (CD-ROM).
122. R. E. Brown and J. J. Burke, Managing the risk of performance based rates, IEEE Transactions on Power Systems, 15 (2) 2000, 893-898.
123. Canadian Electricity Association, 2001 Annual Service Continuity Report on Distribution System Performance in Electrical Utilities, May 2002.
124. IEEE Standard 1366-2003, Guide for Electric Power Distribution Reliability Indices, 2003.
125. P. Save and T. Velarde, Incorporation of performance based ratemaking (PBR) incentives in probabilistic transmission planning criteria, in Proceedings of the 5th International Conference on Probabilistic Methods Applied to Power Systems, Vancouver, Canada, September 21-25, 1997, pp. 17-23.
126. R. Billinton and Z. Pan, Historic performance based distribution system risk assessment, IEEE Transactions on Power Delivery, 19 (4) 2004, 1759-1765.
127. J. E. Propst, Calculating electrical risk and reliability, IEEE Transactions on Industry Applications, 31 (5), 1995, PCIC Conference Record 94-2.
128. D. O. Koval, Zone-branch reliability methodology for analyzing industrial power systems, IEEE Transactions on Industry Applications, 36 (5), 2000, 1212-1219.
129. D. O. Koval, Evaluation of distribution system reliability, Ph.D. Thesis, University of Saskatchewan, Saskatoon, Saskatchewan, June 1978.
130. IEEE Standard 493-1997, IEEE Recommended Practice for Design of Reliable Industrial and Commercial Power Systems (IEEE Gold Book), The Institute of Electrical and Electronics Engineers, Inc., New York, 1997.
131. D. O. Koval, X. Zhang, J. E. Propst, T. Coyle, R. G. Arno and R. S. Hale, Jr, Reliability methodologies applied to The IEEE Gold Book Standard Network, IEEE Industry Applications Magazine, 9 (1), 2003, 32-41.
132. J. E. Propst and D. R. Doan, Improvements in modeling and evaluation of electrical power system reliability, IEEE Transactions on Industry Applications, 37 (5), 2001, 1413-1422.
133. J. E. Propst, PCIC 2000-2 Reliability Software and Documentation, Reliability Model Spreadsheet Software, Available from Equilon Enterprises, LLC andWeb: www.ieee-pcic.org
134. R. Billinton and J. E. Billinton, Distribution system reliability indices, IEEE Transactions on Power Delivery, 4 (1), 1989, 561-586.
135. Canadian Electrical Association, 1991 Annual Service Continuity Report on Distribution System Performance in Canadian Electric Utilities, May 1992.
136. Canadian Electrical Association, Economic Penalties Including Customer Costs, for Loss of Service Continuity, Research and Development Report No. SD-273, July 1991.
137. L. Goel and R. Billinton, A procedure for evaluating interrupted energy assessment rates in an overall electric power system, IEEE Transactions on Power Systems, 8 (3), 1993, 929-936.
138. G. Wacker, R. K. Subramaniam and R. Billinton, Using cost of electric service interruption surveys in the determination of a composite customer damage function, International Journal of Energy Systems, 5, 1985, 100-104.
139. IEEE Standard 493-1990, IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems (ANSI).
140. IEEE Standard 446-1987, IEEE Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications, pp. 74-77.
141. Canadian Standards Association Standard ANN3-C235-83, Preferred Voltage Levels for AC Systems, 0 to 50,000V, 1983, p. 11
142. M. J. Sullivan, B. N. Suddeth, T. Vardell, and A. Vojdani, Interruption Costs, Customer Satisfaction and Expectations for Service Reliability, Presented at the IEEE PES Summer Meeting, Portland, OR, July 23-27, 1995, Paper 95 SM 572-8 PWRS.
143. S. Burns and G. Gross, Value of service reliability, IEEE Transactions on Power Systems, 5 (3), 1990, 825-834.
144. M. Munasinghe and M. Gellerson, Economic criteria for optimizing power system reliability levels, Bell Journal of Economics Spring, 1979, 353-365.
145. Cost-Benefit Analysis of Power System Reliability: Determination of Interruption Costs-Vol. 1: Measurement Methods and Potential Applications in Reliability Cost-Benefit Analysis, EPRI IL-6791, April 1990.
146. J. E. Propst, Calculating electrical risk and reliability, IEEE Transactions on Industry Applications, 31 (5), 1995, PCIC Conference Record 94-2.
147. D. O. Koval, Zone-branch reliability methodology for analyzing industrial power systems, IEEE Transactions on Industry Applications, 36 (5), 2000, 1212-1219.
148. D. O. Koval, Evaluation of distribution system reliability, Ph.D. Thesis, University of Saskatchewan, Saskatoon, Saskatchewan, June 1978.
149. IEEE Standard 493-1997, IEEE Recommended Practice for Design of Reliable Industrial and Commercial Power Systems (IEEE Gold Book), The Institute of Electrical and Electronics Engineers, Inc., New York, 1997.
150. D. O. Koval, X. Zhang, J. E. Propst, T. Coyle, R. G. Arno, and R. S. Hale, Jr, Reliability methodologies applied to The IEEE Gold Book Standard Network, IEEE Industry Applications Magazine, 9 (1), 2003, 32-41.
151. J. E. Propst and D. R. Doan, Improvements in modeling and evaluation of electrical power system reliability, IEEE Transactions on Industry Applications, 37 (5), 2001, 1413-1422.
152. S. Peyton, R. S. Hale, Jr, R. G. Arno, and D. O. Koval, Analysis techniques for electrical and mechanical power systems, 2001 IEEE Industry and Commercial Power Systems Technical Conference Record 01CH37226, 2001, pp. 61-65.
153. J. Prost, PCIC 2000-2 Reliability Software and Documentation, Reliability Model Spreadsheet Software, available from Equilon Enterprises LLC andWeb: www.ieee-pcic.org
154. D. O. Koval, L. Jiao, R. G. Arno, and R. S. Hale, Jr, Zone-branch reliability methodology applied to Gold Book Standard Network, IEEE IAS Annual Conference, Chicago, November/ December 2001.
155. R. E. Brown and J. J. Burke, Managing the risk of performance based rates, IEEE Transactions on Power Systems, 15 (2), 2000, 893-898.
156. Ontario Energy Board Electricity Distribution Rate Handbook, March 2000.
157. Canadian Electricity Association, 2001 Annual Service Continuity Report on Distribution System Performance in Electrical Utilities, May 2002.
158. C. A.Warren and M. J. Adams, Reliability on the regulatory horizon, IEEE T&D Conference and Exposition, Atlanta, GA, October 2001 (CDROM).
159. G. Tollefson, R. Billinton, and G.Wacker, Comprehensive bibliography on reliability worth and electrical service interruption costs: 1980-1990, IEEE Transactions on Power System, 6 (4), 1991, 1508-1514.
160. Canadian Electricity Association, Economic Penalties Including Customer Costs for Loss of Service Continuity, Research and Development Report No. SD-273, July 1991.
161. M. J. Sullivan, B. N. Suddeth, T. Vardell, and A. Vojdani, Interruption costs, customer satisfaction and expectations for service reliability, IEEE Transactions on Power Systems, 11 (2), 1996, 989-995.
162. A. A. Chowdhury and D. O.Koval, Application of customer interruption costs in transmission network reliability planning, IEEE Transactions on Industry Applications, 37 (6), 2001, 1590-1596.
163. A. A. Chowdhury and D. O. Koval, Value-based distribution system reliability planning, IEEE/IAS Transactions, 34 (1), 1998, 23-29.
164. Electric Power Research Institute, Cost-Benefit Analysis of Power System Reliability: Determination of Interruption Costs. Vol. I: Measurement Methods and Potential Applications of Reliability Cost-Benefit Analysis, EPRI EL-6791, Palo Alto, CA, April 1990.
165. M. Munasinghe and M. Gellerson, Economic criteria for optimizing power system reliability levels, Bell Journal of Economics, Spring, 1979, 353-365.
166. A. A. Chowdhury, S. K. Agarwal, and D. O. Koval, Reliability modeling of distributed generation in conventional distribution systems planning and analysis, IEEE Transactions on Industrial Applications, 39 (5), 2003, 1493-1498.
167. A. A. Chowdhury and D. O. Koval, Value-Based distribution system reliability planning, IEEE/IAS Transactions, 34 (1), 23-29, 1998.
168. A. A. Chowdhury and D. O. Koval, Application of customer interruption costs in transmission network reliability planning, IEEE Transactions on Industry Applications, 37 (6), 2001, 1590-1596.
169. R. Billinton and P. Wang, Distribution reliability cost/worth analysis using analytical and sequential simulation techniques, IEEETransactions onPower Systems, 13 (4), 1998, 1245-1250.
170. R. E. Brown, S Gupta, R. D. Christie, S. S. Venkata, and R. Fletcher, Automated primary distribution system design: reliability and cost optimisation, IEEE Transactions on Power Delivery, 12 (2), 1997, 1017-1022.
171. A. A. Chowdhury and D. O. Koval, Current practices and customer value-based distribution system reliability planning, Transactions of the IEEE/IAS Annual Meeting, 2, 2000, 909-916.
172. R. E. Brown and M. M. Marshall, Budget constrained planning to optimize power system reliability, IEEE Transactions on Power Systems, 15 (2), 2000, 887-892.
173. R. E. Brown The impact of heuristic initialization on distribution system reliability optimisation, International Journal of Engineering Intelligent Systems for Electrical Engineering and Communications, 8 (1), 2000, 45-52.
174. Electric Power Research Institute Utility Cost Benefit Analysis Model (UCBM), EPRI RP1678-15, March, 1987.
175. Canadian Electricity Association, 2002 Annual Service Continuity Report on Distribution System Performance in Electrical Utilities, May 2003.
176. A. A. Chowdhury and D. O. Koval, Value-based distribution system reliability planning, IEEE/IAS Transactions, 34 (1), 1998, 23-29.
177. A. A. Chowdhury and D. O.Koval, Application of customer interruption costs in transmission network reliability planning, IEEE Transactions on Industry Applications, 37 (6), 2001, 1590-1596.
178. R. Billinton and P. Wang, Distribution reliability cost/worth analysis using analytical and sequential simulation techniques, IEEE Transactions on Power Systems, 13 (4), 1998, 1245-1250.
179. R. E. Brown, S. Gupta, R. D. Christie, S. S. Venkata, and R. Fletcher, Automated primary distribution system design: reliability and cost optimization, IEEE Transactions on Power Delivery, 12 (2), 1997, 1017-1022.
180. A. A. Chowdhury and D. O. Koval, Current practices and customer value-based distribution system reliability planning, IEEE/IAS Transactions, 40 (5), 2004, 1174-1182.
181. R. E. Brown and M. M. Marshall, Budget constrained planning to optimize power system reliability, IEEE Transactions on Power Systems, 15 (2), 2000, 887-892.
182. R. E. Brown, The impact of heuristic initialization on distribution system reliability optimisation, International Journal of Engineering Intelligent Systems for Electrical Engineering and Communications, 8 (1), 2000, 45-52.
183. A. A. Chowdhury, S. K. Agarwal, and D. O. Koval, Reliability modeling of distributed generation in conventional distribution systems planning and analysis, IEEE Transactions on Industrial Applications, 39 (5), 2003, 1493-1498.
184. Electric Power Research Institute, Utility Cost Benefit Analysis Model (UCBM), EPRI RP1678-15, March 1987.
185. S. V. Vadari and J. D. Hammerly, New faces and functions in a competitive market, IEEE Computer Applications in Power, 10 (1), 1997, 47-52.
186. T. J. Overbye, G. Gross, M. J. Laufenberg and P. W. Sauer, Visualizing power system operations in an open market, IEEE Computer Applications in Power, 10 (1), 1997, 53-58.
187. R. Billinton, L. Salvaderi, J. D. McCalley, H. Chao, Th. Seitz, R. N. Allan, J. Odom, and C. Fallon, Reliability issues in today's electric power utility environment, IEEE Transactions on Power Systems, 12 (4), 1997, 1708-1714.
188. A. A. Chowdhury and D. O. Koval, A probabilistic approach to determining generation equivalence to a transmission facility, IEEE/IAS Transactions, 35 (6), 1999, 1260-1264.
189. H. L.Willis and W. G. Scott, Distributed Power Generation: Planning and Evaluation, Marcel Dekker, 2000.
190. S. M. Harvey Source distributed generation: market rules and market penetration, in Proceedings of Distributed Generation Conference, Denver, CO, September 1999.
191. Electric Power Research Institute, Strategic Market Assessment of Distributed Resources, Palo Alto, CA, December 1995.
192. Electric Power Research Institute, Applications Guide: Distribution Capacity Planning with Distributed Resources, Palo Alto, CA, January 2000.
193. J.-L. Poirier, Domestic and international markets for distributed generation, in Proceedings of Distributed Generation Conference, Denver, CO, September 1999.
194. R. N. Allan, R. Billinton, A. M. Breipohl, and C. H. Grigg, Bibliography on the application of probability methods in power system reliability evaluation: 1967-1991, IEEE Transactions on Power Systems, 9 (1), 1994, 41-49.
195. J. Endrenyi, Reliability Modeling in Electric Power Systems, John Wiley & Sons, Ltd., Chichester, 1978.
196. R. Billinton and R. N. Allan, Reliability Evaluation of Power Systems, Plenum Press, New York, 1996.
197. R. Billinton and R. N. Allan, Reliability Evaluation of Engineering Systems, Plenum Press, New York, 1992.
198. R. Sahu, Using transformer failure data to set spare equipment inventories, Electric Light and Power, October 1980, 41-42.
199. V. I. Kogan, J. A. Fleeman, J. H. Provanzana, and C. H. Shih, Failure analysis of EHV transformers, IEEE Transactions on Power Delivery, 3 (2), 1988, 672-683.
200. G. E. Henry III, A method for economic evaluation of field failures such as low voltage side lightning surge failure of distribution transformers, IEEE Transactions on Power Delivery, 3 (2), 1988, 813-818.
201. IEEE Working Group D1 on Operating and Reliability Aspects for Substation Design of the Distribution Substation Subcommittee, Substation Subcommittee of the Power Engineering Society, Bibliography for reliability and availability engineering for substations, IEEE Transactions on Power Delivery, 4 (3), 1989, 1689-1694.
202. W. J. McNutt and G. H. Kaufman, Evaluation of a functional life model for power transformers, IEEE Transactions on Power Apparatus and Systems, 102, 1983, 1151-1162.
203. Canadian Electricity Association, Forced Outage Performance ofTransmission Equipment for the Period January 1, 1995 to December 31, 1999, 2000.
204. CEA Report: 220 D711A, CEA National Power Quality Survey, prepared by J.S. Chan, Brent Hughes, Powertech Labs Inc., Canadian Electricity Association, Montreal, Quebec, Canada.
205. M. B. Hughes, J. S. Chan, and D.O. Koval, Distribution customer power quality experience, IEEE Transactions on Industry Applications, 1993, 1204-1211.
206. B. Roger, Power Quality Measurement Protocol: CEA Guide to Performing Power Quality Surveys, CEA 220 D711, Canadian Electricity Association, Montreal, Quebec, Canada.
207. IEEE P-1100, Powering and Grounding Sensitive Electronic Equipment (IEEE Emerald Book).
208. G.W. Allen and D. Segall, Monitoring of computer installations for power line disturbances, IEEE Winter Power Meeting Conference Paper WINPWR, C74, 199-6, 1974.
209. M. Goldstein and P. D. Speranza, The quality of U.S. commercial AC power, in INTELEC (IEEE International Telecommunications Energy Conference), 1992, pp. 28-33.
210. Voltage SagWorking Group, L. Conrad, Chairman, Proposed Chapter 9 for PredictingVoltage Sags (Dips) in Revision to IEEE Standard 493, IEEE Transactions on Industry Applications, 30 (3), 1994, 805-821.
211. IEEE Standard 493-1990, IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems (ANSI).
212. IEEE Standard 446-1987, IEEE Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications, 1987, 74-77.
213. Canadian Electricity Association, Power Quality Labels for Sensitive Electronic Equipment to Withstand Voltage Surges, Sags and Swells from the Utility System or Customer Sites, Canadian Electrical Association Report No. 9109 U 856, 1994.
214. Undervoltage Ride-Through Performance of Off-The-Shelf Personal Computers, EPRI Power Electronics Application Center, PQTN Brief No. 7, December 1992.
215. D. O. Koval, J. J. Leonard, and Z. J. Licsko, Power quality of small rural industries, IEEE Transactions on Industry Applications, 29 (5), 1993, 696-700.
216. D. O. Koval, Power system disturbance patterns, IEEE Transactions on Industry Applications, 26(3), 1990, 556-562.
217. D. O. Koval, How long should power system disturbance site monitoring be in order to be significant, IEEE Transactions on Industry Applications, 26 (4), 1990, 556-562, 705-710.