Analysis of FGM beams by means of classical and advanced theories

Mechanics of Advanced Materials and Structures

Volumn 17, Issue 8, 2010, Pages 622-635

  Giunta, G ^a   Belouettar, S ^b   Carrera, E ^a  

^a POLITECNICO DI TORINO   (Italy)

^b LUXEMBOURG INSTITUTE OF SCIENCE AND TECHNOLOGY   (Luxembourg)

Author keywords

axiomatic refined beam theories; functionally graded materials; Navier type solution; unified formulation

Indexed keywords

APPROXIMATION ORDERS; BEAM CROSS-SECTION; BEAM THEORIES; CLASSICAL BEAM THEORY; CLOSED FORM SOLUTIONS; DEEP BEAM; ELASTICITY SOLUTIONS; EULER-BERNOULLI; FUNCTIONALLY GRADED; GEOMETRICAL PARAMETERS; GOVERNING DIFFERENTIAL EQUATIONS; HEIGHT RATIO; LINEAR STATIC ANALYSIS; LOADING CONDITION; NAVIER-TYPE SOLUTIONS; NUMERICAL INVESTIGATIONS; REFINED THEORY; STRESS FIELD; THREE DIMENSIONAL FINITE ELEMENT MODEL; THREE-DIMENSIONAL DISPLACEMENTS; TORSIONAL LOADINGS; TWO DIRECTIONS; UNIFIED FORMULATION;

BOUNDARY CONDITIONS; FINITE ELEMENT METHOD; LOADING; MATERIALS PROPERTIES; PLATES (STRUCTURAL COMPONENTS); REFINING; THREE DIMENSIONAL;

FUNCTIONALLY GRADED MATERIALS;

EID: 78649505423     PISSN: 15376494     EISSN: 15376532     Source Type: Journal    
DOI: 10.1080/15376494.2010.518930     Document Type: Article

References (51)

1. M. Koizumi, FGM Activities in Japan. Composites Part B: Engineering, vol. 28, 1-2, pp. 1-4, 1997.
2. J. N. Reddy, Analysis of Functionally Graded Plates, Int. J. Numer. Method Eng., vol. 47, no. 1-2, pp. 663-684, 2000.
3. J. Aboudi, M. J. Pindera, and S. M. Arnold, Higher-Order Theory for Functionally Graded Materials, Composites Part B: Engineering, vol. 30, no. 8, pp. 777-832, 1999.
4. Y. S. Shabana and N. Noda, Thermo-Elasto-Plastic Stresses in Functionally Graded Materials Subjected to Thermal Loading Taking Residual Stresses for the Fabrication Process into Consideration, Composites Part B: Engineering, vol. 32, no. 2, pp. 111-121, 2001.
5. F. Erdogan, Fracture Mechanics of Functionally Graded Materials, Composites Engineering, vol. 5, no. 7, pp. 753-770, 1995.
6. H. T. Xiao, Z. Q. Yue, L. G. Tham, et al., Stress Intensity Factors for Penny-Shaped Cracks Perpendicular to Graded Interfacial Zone of Bonded Bi-Materials, Eng. Fract. Mech., vol. 72, no. 1, pp. 121-143, 2005.
7. C. Y. Jian, T. Hashida, H. Takahashi, et al., Thermal Shock and Fatigue Resistance Evaluation of Functionally Graded Coating for Gas Turbine Blades by Laser Heating Method, Compos. Eng., vol. 5, no. 7, pp. 879-889, 1995.
8. W. Pompe, H. Worch, M. Epple, et al., Functionally Graded Materials for Biomedical Applications, Mater. Sci. Eng. A, vol. 362, no. 1-2, pp. 40-60, 2003.
9. E. Müller, C. Drasar, J. Schilz, et al., Functionally Graded Materials for Sensor and Energy Applications. Mater. Sci. Eng. A, vol. 362, no. 1-2, pp. 17-39, 2003.
10. U. Schulz, M. Peters, F. W. Bach, et al., Graded Coatings for Thermal, Wear and Corrosion Barriers, Mater. Sci. Eng. A, vol. 362, no. 1-2, pp. 61-80, 2003.
11. S. Suresh and A. Mortensen, Fundamentals of Functional Graded Materials, IOM Communications Limited, London, UK, 1998.
12. Y. Miyamoto, W. A. Kaysser, B. H. Rabin, et al., Functionally Graded Materials: Design, Processing and Applications, Kluwer Academic, Boston, MA, 1999.
13. R. Watanabe, T. Nishida, and T Hirai, Present Status of Research on Design and Processing of Functionally Graded Materials, Met. Mater. Int., vol. 9, no. 6, pp. 513-519, 2003.
14. R. Hill, A Self-Consistent Mechanics of Composite Materials, J. Mechanics and Physics of Solids, vol. 13, no. 4, pp. 213-222, 1965.
15. T. Mori and K. Tanaka, Average Stressin Matrix and Average Elastic Energy of Materials with Misfitting Inclusions, Acta Metallurgica, vol. 21, no. 5, pp. 571-574, 1973.
16. J. Aboudi, Mechanics of Composite Materials: A Unified Micromechanical Approach, Elsevier, The Netherlands, 1991.
17. S. Nemat-Nasser and M. Hori, Micromechanics: Overall Properties of heterogeneous materials, North-Holland, New York, 1993.
18. J. R. Zuiker and G. J. Dvorak, The Effective Properties of Functionally Graded Composites. I Extension of The Mori-Tanaka Method to Linearly Varying Fields, Compos. Eng., vol. 4, no. 1, pp. 19-35, 1994.
19. H. T. Wakashima and H. Tsukamoto, Micromechanical Approach to the Thermomechanics of Ceramic-Metal Gradient Materials. In 1st Symp. Functionally Gradient Materials, The Functionally Gradient Materials Forum, Sendai, Japan, pp. 19-26, 1990.
20. M. J. Pindera, J. Aboudi, and S. M. Arnold, Limitations of the Uncoupled Rve-Based Micromechanical Approach in the Analysis of Functional Graded Composites, Mech. Mat., vol. 20, no. 1, pp. 77-94, 1995.
21. J. Aboudi, M. J. Pindera, and S. M. Arnold, Elastic Response of Metal Matrix Composites with Tailored Microstructures to Thermal Gradients, Int. J. Solids Struct., vol. 31, no. 10, pp. 1393-1428, 1994.
22. J. Aboudi, M. J. Pindera, and S. M. Arnold, Thermoelastic Theory for the Response of Materials Functionally Graded in two Directions, Int. J. Solids Struct., vol. 33, no. 7, pp. 931-966, 1996. (Pubitemid 126403870)
23. A. Chakraborty, S. Gopalakrishnan, and J. N. Reddy, A New Beam Finite Element for the Analysis of Functionally Graded Materials, Int. J. Mech. Sci., vol. 45, no. 3, pp. 519-539, 2003.
24. S. P. Timoshenko, On The Corrections for Shear of the Differential Equation for Transverse Vibrations of Prismatic Bars, Philos. Mag., vol. 41, pp. 744-746, 1921.
25. S. P. Timoshenko, On The Transverse Vibrations of Bars of Uniform Cross Section, Philos. Mag., vol. 43, pp. 125-131, 1922.
26. S. P. Timoshenko and J. N. Goodier, Theory of Elasticity. McGraw-Hill, 1970.
27. X. F. Li, A Unified Approach for Analyzing Static and Dynamic Behaviors of Functionally Graded Timoshenko and Euler-Bernoulli Beams, J. Sound Vib., vol. 318, no. 4-5, pp. 1210-1229, 2008.
28. R. Kadoli, K. Akhtara, and N. Ganesanb, Static Analysis of Functionally Graded Beams Using Higher order Shear Deformation Theory, Appl. Math. Model., vol. 32, no. 12, pp. 2509-2525, 2008.
29. S. Kapuria, M. Bhattacharyya, and A. N. Kumarb, Bending and Free Vibration Response of Layered Functionally Graded Beams: A Theoretical Model and its Experimental Validation, Compos. Struct., vol. 82, no. 3, pp. 390-402, 2008.
30. Y. Tomota, K. Kuroki, T. Mori, et al., Tensile Deformation of Two-Ductile-Phase Alloys: Flow Curves of a-jfe-cr-ni alloys. Mat. Sci. Eng., vol. 24, no. 1, pp. 85-94, 1976.
31. 3 s-FGM Thick Beams, Compu. Mat. Sci., vol. 44, no. 4, pp. 1344-1350, 2009.
32. Y. L. Chung and S. H. Chi, The Residual Stress of Functionally Graded Materials, J. Chinese Institute of Civil and Hydraulic Engineering, vol. 13, pp. 1-9, 2001.
33. B. V. Sankar, An elasticity Solution for Functionally Graded Beams, Compos. Sci. Technol., vol. 61, no. 5, pp. 689-696, 2001.
34. H. Zhu and B. V. Sankar, A Combined Fourier Series-Galerkin Method for the Analysis of Functionally Graded Beams. J. Appl. Mech., vol. 71, no. 3, pp. 421-424, 2004.
35. J. H. Ding, D. J. Huang, and W. Q. Chen, Elasticity Solutions for Plane Anisotropic Functionally Graded Beams, Int. J. Solid Struct., vol. 44, no. 1, pp. 176-196, 2007.
36. K. Silverman, Orthotropic Beams Under Polynomial Loads. Proceeding ASCE, Journal of the Engineering Mechanics Division, vol. 90, pp. 293-319, 1964.
37. E. Carrera, Theories and Finite Elements for Multilayered Plates and Shells: a Unified Compact Formulation with Numerical Assessment and Benchmarking, Arch. Comput. Method Eng., vol. 10, no. 3, pp. 215-296, 2003.
38. E. Carrera, S. Brischetto, and A. Robaldo, Variable Kinematic Model for the Analysis of Functionally Graded Material Plates, AIAA Journal, vol. 46, no. 1, pp. 194-203, 2008.
39. S. Brischetto and E. Carrera, Advanced Mixed Theories for Bending Analysis of Functionally Graded Plates, Computers and Structures, vol. 2008., in press.
40. E. Reissner, On a Certain, Mixed Variational Theory and a Proposed Application, Int. J. Numer. Method Eng., vol. 20, pp. 1366-1368, 1984.
41. S. Brischetto, R. Leetsch, E. Carrera, et al., Thermo-Mechanical Bending of Functionally Graded Plates, J. Therm. Stresses, vol. 31, no. 3, pp. 286-308, 2008.
42. F. Delale and F. Erdogan, Crack Problem for a Nonhomogeneous Plane, J. Appl. Mech., vol. 50, no. 3, pp. 609-614, 1983.
43. G. R. Cowper, The Shear Co-Efficient in Timoshenko Beam Theory. J. Appl. Mech., vol. 33, no. 10, pp. 335-340, 1966.
44. A. V. K. Murty, Analysis of Short Beams, AIAA Journal, vol. 8, no. 11, pp. 2098-2100, 1970.
45. E. Carrera and S. Brischetto, Analysis of Thickness Locking in Classical, Refined and Mixed Multilayered Plate Theories, Compos. Struct., vol. 82, no. 4, pp. 549-562, 2008. (Pubitemid 47543566)
46. E. Carrera and S. Brischetto, Analysis of Thickness Locking in Classical, Refined and Mixed Theories for Layered Shells, Compos. Struct., vol. 85, no. 1, pp. 83-90, 2008. (Pubitemid 351598109)
47. E. Carrera, G. Giunta, and S. Brischetto, Hierarchical Closed form Solutions for Plates Bent by Localized Transverse Loadings. Journal of Zhejiang University SCIENCE A, vol. 8, no. 7, pp. 1026-1037, 2007.
48. E. Carrera and G. Giunta, Hierarchical Models for Failure Analysis of Plates Bent by Distributed and Localized Transverse Loadings, J. Zhejiang University S. A, vol. 9, no. 5, pp. 600-613, 2008.
49. C. F. Lü, W. Q. Chen, R. Q. et al., Semi-Analytical Elasticity Solutions for Bi-Directional Functionally Graded Beams, Int. J. Solid Struct., vol. 45, no. 1, pp. 258-275, 2008.
50. C. F. Lü, W. Q. Chen, and Z. Zheng, Two-Dimensional Thermoelasticity Solution for Functionally Graded Thick Beams, Science in China Series G: Physics, Mechanics and Astronomy, vol. 49, no. 4, pp. 451-460, 2006.
51. MSC. Nastran, MSC. Nastran 2001, Getting Started with MSC. Nastran, User's Guide, 2002.