Influence of ball burnishing on surface quality and tribological characteristics of polymers under dry sliding conditions

Tribology International

Volumn 44, Issue 2, 2011, Pages 144-153

  Low, K O ^a   Wong, K J ^b  

^a MULTIMEDIA UNIVERSITY   (Malaysia)

^b UNIVERSITI TEKNOLOGI MALAYSIA   (Malaysia)

Author keywords

Friction; Polymer; Surface roughness; Wear

Indexed keywords

BALL BURNISHING; COEFFICIENT OF FRICTIONS; DRY SLIDING; POLYOXYMETHYLENE; SURFACE QUALITIES; TRIBOLOGICAL CHARACTERISTICS; WEAR; WEAR RATES;

ACETAL RESINS; BURNISHING; FRICTION; METAL ANALYSIS; POLYMERS; SURFACE PROPERTIES; SURFACE TREATMENT; TRIBOLOGY;

SURFACE ROUGHNESS;

EID: 78649462099     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2010.10.005     Document Type: Article

References (36)

1. AM. Hassan The effects of ball- and roller-burnishing on the surface roughness and hardness of some non-ferrous metals J Mater Process Technol 72 3 1997 385 391
2. WF Smith, and J. Hashemi Foundations of materials science and engineering 4th ed. 2006 McGraw Hill New York
3. AM. Hassan An investigation into the surface characteristics of burnished cast AlCu alloys Int J Mach Tools Manuf 37 6 1997 813 821
4. L Luca, S Neagu-Ventzel, and I. Marinescu Effects of working parameters on surface finish in ball burnishing of hardened steels J Precis Eng 29 2 2004 253 256
5. FJ Shiou, and CH. Chen Freeform surface finish of plastic injection mould by using ball-burnishing process J Mater Process Technol 140 13 2003 248 254
6. MH. El-Axir An investigation into roller burnishing Int J Mach Tools Manuf 40 11 2000 1603 1617
7. WZ Zhuang, and GR. Halford Investigation of residual stress relaxation under cyclic load Int J Fatigue 23 1 2001 31 37
8. PS Prevy, and JT. Cammett The influence of surface enhancement by low plasticity burnishing on the corrosion fatigue performance of AA7075-T6 Int J Fatigue 26 9 2004 975 982
9. NSM El-Tayeb, KO Low, and PV. Brevern Enhancement of surface quality and tribological properties using ball burnishing process Mach Sci TechnolInt J 12 2 2008 234 248
10. AM Hassan, and SZS Al-Dhifi Improvement in the wear resistance of brass components by the ball burnishing process J Mater Process Technol 96 13 1999 73 80
11. H Hamadache, L Laouar, NE Zeghib, and K. Chaoui Characteristics of Rb40 steel superficial layer under ball and roller burnishing J Mater Process Technol 180 13 2006 130 136
12. MM El-Khabeery, and MH. El-Axir Experimental techniques for studying the effects of milling roller-burnishing parameters on surface integrity Int J Mach Tools Manuf 41 12 2001 1705 1719
13. H Luo, L Wang, and C. Zhang Study on the aluminium alloy burnishing processing and the existence of the outstripping phenomenon J Mater Process Technol 116 1 2001 88 90
14. Anantha BL, Ram A, Krishnamurthy R, Surface integrity studies in burnishing. In: Proceedings of the eighth AIMTDR conference, IIT Bombay, 1978, p. 48790.
15. YC Yen, P Sartkulvanicha, and T. Altan Finite element modeling of roller burnishing process CIRP AnnalsManuf Technol 54 1 2005 237 240
16. W Bouzid Sa, and K. Sa Finite element modeling of burnishing of AISI 1042 steel Int J Adv Manuf Technol 25 2006 460 465
17. P Sartkulvanich, T Altan, F Tasso, and G. Rodriguez Finite element modeling of hard roller burnishing : an analysis on the effects of process parameters upon surface finish and residual stresses J Manuf Sci Eng 129 4 2007 705 716
18. CJ Hooke, P Liao, M Rao, SN Kukureka, and YK. Chen The friction and wear of polymers in non-conformal contacts Wear 200 12 1996 83 94
19. TS Barrett, GW Stachowiak, and AW. Batchelor Effect of roughness and sliding speed on the wear and friction of ultra-high molecular weight polyethylene Wear 153 2 1992 331 350
20. DM Tetreault, and FE. Kennedy Friction and wear behaviour of ultrahigh molecular weight polyethylene on CoCr and titanium alloys in dry and lubricated environments Wear 133 2 1989 295 307
21. Y. Yamaguchi Tribology of plastic materials: their characteristics and applications to sliding components 1990 Elsevier Amsterdam
22. NK Myshkin, MI Petrokovets, and AK. Kovalev Tribology of polymers: adhesion, friction, wear, and mass-transfer Tribol Int 38 11-12 2005 910 921
23. KJ Brown, JR Atkinson, D Dowson, and V. Wright The wear of ultrahigh molecular weight polyethylene and a preliminary study of its relation to the in vivo behaviour of replacement hip joints Wear 40 2 1976 255 264
24. P Samyn, G Schoukens, J Quintelier, and P. De Baets Friction, wear and material transfer of sintered polyimides sliding against various steel and diamond-like carbon coated surfaces Tribol Int 39 2006 575 589
25. W. Wieleba The statistical correlation of the coefficient of friction and wear rate of PTFE composites with steel counterface roughness and hardness Wear 252 2002 719 729
26. L Zsidai, P De Baets, P Samyn, G Kalacska, AP Van Peteghem, and F. Van Parys The tribological behaviour of engineering plastics during sliding friction investigated with small-scale specimens Wear 253 2002 673 688
27. H. Benabdallah Friction and wear of blended polyoxymethylene sliding against coated steel plates Wear 254 2003 1239 1246
28. NSM El-Tayeb, KO Low, and PV. Brevern The influence of roller burnishing process on hardness and roughness of cylindrical polymer surfaces Proc IMechE, Part: J, J Eng Tribol 222 7 2008 947 955
29. KO Low, NSM El-Tayeb, PV Brevern, and FM. Chong Study on the scratch hardness and indentation hardness of burnished poly(oxymethylene) surfaces Tribol Trans 52 2 2009 197 203
30. K Friedrich, Z Lu, and AM. Hger Overview on polymer composites for friction and wear application Theor Appl Fract Mech 19 1 1993 1 11
31. MH El-Axir, and AA. Ibrahim Some surface characteristics due to center rest ball burnishing J Mater Process Technol 167 1 2005 47 53
32. AM Hassan, and AM. Maqableh The effects of initial burnishing parameters on non-ferrous components J Mater Process Technol 102 1-3 2000 115 121
33. FP Bowden, and D. Tabor The friction and lubrication of solids 2nd ed. 2001 Oxford University Press New York
34. S Ducret, C Pailler-Mattei, V Jardret, R Vargiolu, and H. Zahouani Friction characterisation of polymers abrasion (UHWMPE) during scratch tests: single and multi-asperity contact Wear 255 712 2003 1093 1100
35. S Mezlini, P Kapsa, JC Abry, C Henon, and J. Guillemenet Effect of indenter geometry and relationship between abrasive wear and hardness in early stage of repetitive sliding Wear 260 4-5 2006 412 421
36. BH. Stuart Surface plasticisation of poly(ether ether ketone) by chloroform Polym Test 16 1 1997 49 57