Anionic nylon 6/zinc composite materials: Evaluation of thermal and mechanical behavior

International Journal of Polymer Analysis and Characterization

Volumn 15, Issue 8, 2010, Pages 509-523

  Rusu, Gheorghe ^a   Rusu, Elena ^a  

^a PETRU PONI INSTITUTE OF MACROMOLECULAR CHEMISTRY   (Romania)

Author keywords

Anionic nylon 6; Mechanical properties; Nylon 6=zinc composites; Thermal analysis

Indexed keywords

CRYSTALLINE STRUCTURE; CRYSTALLIZATION TEMPERATURE; DEGREE OF CRYSTALLINITY; EFFECT OF ZINCS; FLEXURAL MODULUS; FLEXURAL STRENGTH; IN-SITU; MECHANICAL BEHAVIOR; MECHANICAL MEASUREMENTS; MELTING TEMPERATURES; METAL-POLYMER COMPOSITES; METALLIC FILLERS; NOTCHED IZOD IMPACT STRENGTH; NYLON 6=ZINC COMPOSITES; NYLON-6; THERMAL ANALYSIS; THERMAL AND MECHANICAL PROPERTIES; THERMAL STABILITY; WIDE-ANGLE X-RAY DIFFRACTION;

ANIONIC POLYMERIZATION; COMPOSITE MATERIALS; FILLERS; IMPACT STRENGTH; METAL MOLDING; POLYAMIDES; RAYON; ROTATIONAL MOLDING; THERMOANALYSIS; X RAY DIFFRACTION; ZINC;

MECHANICAL PROPERTIES;

EID: 78649387974     PISSN: 1023666X     EISSN: 15635341     Source Type: Journal    
DOI: 10.1080/1023666X.2010.520967     Document Type: Article

References (44)

1. Hasan, M. M., Y. Zhou, H. Mahfuz, and S. Jeelani. 2006. Effect of SiO2 nanoparticle on thermal and tensile behavior of nylon-6. Mater. Sci. Eng. A 429: 181-188.
2. Al-Mulla, A. 2009. Development and characterization of polyamide-10, 6=organoclay nanocomposites. Int. J. Polym. Anal. Charact. 14 (6): 540-550.
3. Segatelli, M. G., I. V. P. Yoshida, and M. do Carmo Gonc ̧alves. 2010. Natural silica fiber as reinforcing filler of nylon 6. Composites Part B 41 (1): 98-105.
4. Kri-stofič, M., P. Alexy, and N. Karabcová. 2004. Optimisation of properties of ternary co-polyamides based on '-caprolactam. Fibres Text. East. Eur. 12: 12-16.
5. Bose, S., and P. A. Mahanwar. 2004. Effect of particle size of filler on properties of nylon-6. J. Miner. Mater. Charact. Eng. 3: 23-31.
6. Unal, H., A. Mimaroglu, and M. Alkan. 2004. Mechanical properties and morphology of nylon-6 hybrid composites. Polym. Int. 53: 56-60.
7. Wunderlich, B. 2008. Thermal properties of aliphatic nylons and their link to crystal structure and molecular motion. J. Therm. Anal. Calorim. 93: 7-17.
8. Rusu, Gh., and E. Rusu. 2010. Evaluation of thermal and dielectric behaviour of some anionic nylon 612 copolymers. Mater. Des. 31: 4601-4610.
9. Auriemma, F., V. Petraccone, L. Parravicini, and P. Corradini. 1997. Mesomorphic form (b) of nylon 6. Macromolecules 30: 7554-7559.
10. Rusu, Gh., and E. Rusu. 2007. In situ nylon 6=graphite composites. Physico-mechanical properties. J. Optoelectron. Adv. Mater. 9: 2102-2109.
11. Fang, X., C. D. Simone, E. Vaccaro, S. J. Huang, and D. A. Scola. 2002. Ring-opening polymerization of '-caprolactam and '-caprolactone via microwave irradiation. J. Polym. Sci. Part A: Polym. Chem. 40: 2264-2275.
12. Kohan, M. I. 1995. Nylon Plastics Handbook. Munich: Hanser Gardner Publications.
13. Garner, D. P., and P. D. Fasulo. 1988. The effect of composition on the properties of nylon 612 copolymers. J. Appl. Polym. Sci. 36: 495-509.
14. Carone, E., Jr., U. Kopcak, M. C. Gonçalves, and S. P. Nunes. 2000. In situ compatibilization of polyamide 6=natural rubber blends with maleic anhydride. Polymer 41: 5929-5935.
15. Nie, C. S., F. Kremer, A. Poglitsch, G. Bechtold, and L. Genzel. 1985. Picosecond relaxations in hydrated polyamide-6 observed by millimetre-wave spectroscopy. J. Polym. Sci. Part B: Polym. Phys. 23: 1247-1254.
16. Cheang, P., and K. A. Khor. 2003. Effect of particulate morphology on the tensile behaviour of polymer-hydroxyapatite composites. Mater. Sci. Eng. A 345: 47-54.
17. Gungor, A. 2006. The physical and mechanical properties of polymer composites filled with Fe-powder. J. Appl. Polym. Sci. 99: 2438-2442.
18. Mansour, S. H., I. E. Goma, and I. K. Bishay. 2007. Effect of metal type and content on mechanical, electrical and free-volume properties of styrenated polyesters. J. Mater. Sci. 42: 8473-8480.
19. Wu, T.-M., and C.-S. Liao. 2000. Polymorphism in nylon 6=clay nanocomposites. Macromol. Chem. Phys. 201: 2820-2825.
20. Ranade, A., N. A. D'Souza, B. Gnade, and A. Dharia. 2003. Nylon-6 and montmorillonitelayered silicate (MLS) nanocomposites. J. Plast. Film Sheeting 19: 271-285.
21. Hasegawa, N., H. Okamoto, M. Kato, A. Usuki, and N. Sato. 2003. Nylon 6=Namontmorillonite nanocomposites prepared by compounding nylon 6 with Namontmorillonite slurry. Polymer 44: 2933-2937.
22. havarria, F., and D. R. Paul. 2004. Comparison of nanocomposites based on nylon 6 and nylon 66. Polymer 45: 8501-8515.
23. Rhutesh, K. S., and D. R. Paul. 2004. Nylon 6 nanocomposites prepared by a melt mixing masterbatch process. Polymer 45: 2991-3000.
24. Rusu, Gh., and E. Rusu. 2006. Nylon 6=SiO2 nanocomposites synthesized by in situ anionic polymerization. High Perform. Polym. 18: 355-375.
25. usu, Gh., M. Rusu, E. Rusu, A. Stoleriu, and C.-A. Teacǎ. 2000. Direct centrifugal molding of nylon 6-based products from '-caprolactam. Polym. Plast. Technol. Eng. 39: 233-247.
26. Rusu, Gh., K. Ueda, E. Rusu, and M. Rusu. 2001. Polyamides from lactams by centrifugal molding via anionic ring-opening polymerization. Polymer 42: 5669-5678.
27. Rusu, Gh., and E. Rusu. 2009. Nylon 6=copper composites by in situ polymerization. J. Optoelectron. Adv. Mater. 11: 673-680.
28. Udipi, K., R. S. Dave, R. L. Kruse, and L. R. Stebbins. 1997. Polyamides from lactams via anionic ring-opening polymerization: 1. Chemistry and some recent findings. Polymer 38: 927-938.
29. Rusu, Gh., and E. Rusu. 2004. Caprolactam-laurolactam (nylon 6=12) copolymers: Synthesis and characterization. High Perform. Polym. 16: 569-584.
30. Li, T.-C., J. Ma, M. Wang, W. C. Tjiu, T. Liu, and W. Huang. 2007. Effect of clay addition on the morphology and thermal behavior of polyamide 6. J. Appl. Polym. Sci. 103: 1191-1199.
31. Xu, X., B. Li, H. Lu, Z. Zhang, and H. Wang. 2007. The interface structure of nano-SiO2= PA66 composites and its influence on material's mechanical and thermal properties. Appl. Surf. Sci. 54: 1456-1462.
32. Li, X. H., Q. J. Wu, and L. A. Berglund. 2002. Polymorphism in polyamide 66=clay nanocomposites. Polymer 43: 4967-4972.
33. Cho, J. W., and D. R. Paul. 2001. Nylon 6 nanocomposites by melt compounding. Polymer 42: 1083-1094.
34. Chae, D. W., S. G. Oh, and B. C. Kim. 2004. Effect of silver nanoparticles on the dynamic crystallization behavior of nylon-6. J. Polym. Sci. Part B: Polym. Phys. 42: 790-799.
35. Horský J., J. Kolařík, and L. Fambri. 2001. Gradient composites of alkaline poly(6-hexanelactam) with graphite: One-step synthesis, structure, and mechanical properties. Macromol. Mater. Eng. 286: 216-224.
36. Horský J., J. Kolařík, and L. Fambri. 2003. One-step synthesis of hybrid composites of poly(6-hexanelactam) combining solid tribological additives and reinforcing components. Macromol. Mater. Eng. 288: 421-431.
37. Zhao, Z., W. Yu, Y. Liu, J. Zhang, and Z. Shao. 2004. Isothermal crystallization behaviors of nylon-6 and nylon-6=montmorillonite nanocomposite. Mater. Lett. 58: 802-806.
38. Pan, W., H. Zhang, and Y. Chen. 2009. Electrical and mechanical properties of PMMA= nano-ATO composites. J. Mater. Sci. Technol. 25: 247-250.
39. Li, Y., and G. Yang. 2010. An unusual morphology and crystallization behavior in situ formed polyphenylene oxide=polyamide 6 blends. J. Mater. Sci. 45: 987-992.
40. Liu, X., Q. Wu, L. A. Berglund, and Z. Qi. 2002. Investigation on unusual crystallization behavior in polyamide 6=montmorillonite nanocomposites. Macromol. Mater. Eng. 287: 515-522.
41. Kondelkova, J. Z., J. Tuzar, K. Kraliceck, M. Sandova, Strohalmova, and V. Kubanek. 1977. Polymerization branching of '-caprolactam with bislactams. Angew. Makromol. Chem. 64: 123-131.
42. De la Campa, J. G., E. Guijarro, F. J. Serna, and J. De Abajo. 1985. Aromatic polyisophthalamides with iminobenzoyl pendant groups. Eur. Polym. J. 21: 1013-1019.
43. Ou, Y. C., F. Yang, and Z.-Z. Yu. 1998. A new conception on the toughness of nylon 6=silica nanocomposite prepared via in situ polymerization. J. Polym. Sci. Part B: Polym. Phys. 36: 789-795.
44. Unal, H., and A. Mimaroglu. 2004. Influence of filler addition on the mechanical properties of nylon-6 polymer. J. Reinf. Plast. Compos. 23: 461-460.