Quantifying the effects of straining-hardening and water chemistry on crack growth rates of 316L Ss welds in high temperature water

14th International Conference on Environmental Degradation of Materials in Nuclear Power Systems Water Reactors 2009

Volumn 1, Issue , 2009, Pages 636-645

  Lu, Zhanpeng ^a   Sakaguchi, Kazuhiko ^a   Negishi, Koji ^a   Takeda, Yoichi ^a   Ito, Yuzuru ^a   Shoji, Tetsuo ^a  

^a TOHOKU UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

316 L STAINLESS STEEL; 316L SS; CRACK FRONTS; CRACK GROWTH; CRACK GROWTH RATES; CRACK LENGTH; DELTA-FERRITE; FERRITE CONTENT; FUSION LINES; HIGH-TEMPERATURE WATER; IN-SITU; INTERGRANULAR STRESS CORROSION CRACKING; PURE WATER; SCC GROWTH RATES; STRESS CORROSION CRACK; TEST ENVIRONMENT; WATER CHEMISTRY; WELD METAL;

BIOCHEMICAL OXYGEN DEMAND; CRACKING (CHEMICAL); CRACKS; DEGRADATION; DISSOLVED OXYGEN; FERRITE; GROWTH RATE; HEAT AFFECTED ZONE; JOINTS (STRUCTURAL COMPONENTS); METALS; NUCLEAR ENERGY; RESIDUAL STRESSES; STAINLESS STEEL; STRESS CORROSION CRACKING; VICKERS HARDNESS; WELDING;

WATER CONTENT;

EID: 78649361556     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (24)

1. R.L. JONES, G. M. GORDON and G. H. NEILS, Environmental Degradation of Materials in Boiling Water Reactors. Proc. 4th International Symposium on Environmental Degradation of Materials in Nuclear Power Systems -Water Reactors, New Port Beach, P.1, TMS (1989).
2. H. T. TANG. R.S. PATHANIA, A.R. MCILREE, Overview of Environmentally Assisted Cracking in LWR Components, Corrosion'2002, Paper No.507, NACE (2002).
3. P. L. ANDRESEN and F. P. FORD, Life Prediction by Mechanistic Modeling and System Monitoring of Environmental Cracking of Iron and Nickel-alloys in Aqueous Systems, Mat Sci. Eng. A, 103, p.167 (1988).
4. R. M. HORN, G. M. GORDON, F. P. FORD and R. L. COWAN, Experience and Assessment of Stress Corrosion Cracking in L-grade Stainless Steel BWR Internals. Nuclear Engineering and Design, 174 p.313 (1997).
5. T. SHOJI, Progress in the Mechanistic Understanding of BWR SCC and its Implication to the Prediction of SCC Growth Behavior in Plants, Proc. 11th Int. Symp. Environ. Degradation of Materials in Nuclear Power Systems-Water Reactors, p.588, ANS (2003).
6. S. SUZUKI, K. KUMAGAYI, C. SHITARA, J. MIZUTANI, A. SAKASHITA, H. TOHKUMA and H. YAMAHSITA, Maintenology, 3, p.65 (2004).
7. T. M. ANGELIU, P. L. ANDRESEN, E. HALL, J. A. SUTLIFF, S. SITZMAN and R. M. HORN, Intergranular Stress Corrosion Cracking of Unsensitized Stainless Steels in BWR environments, Proc. 9th Int. Symp. Environ. Degradation of Materials Nuclear Power Systems-Water Reactors, p. 311, TMS (1999).
8. NISA, Documents presented at 5th structural integrity evaluation committee, NISA(Feb. 18, 2003).
9. S. OOKI, Y. TANAKA, K. TAKAMORI, S. SUZUKI, S. TANAKA, Y. SAITO, T. NAKAMURA, T. KATO, K. CHATANI and M. Kodama, Study on SCC Growth Behavior of BWR Shroud, Proc. 12th Int. Symp. Environ. Degradation of Materials Nuclear Power Systems-Water Reactors, p.365, TMS (2005).
10. P. L. ANDRESEN, L. M. YOUNG, W. R. CATLIN and R. M. HORN, Stress Corrosion Crack Growth Rate Behavior of Various Grades of Cold Worked Stainless Steel in High Temperature Water, Corrosion'2002, paper no. 511, NACE (2002).
11. T. SHOJI, G. F. LI, J. H. KWON, S. MATSUSHIMA and Z. P. LU, Quantification of Yield Strength Effects on IGSCC of Austenitic Stainless Steels in High Temperature Waters, Proc. 11th Int. Symp. Environ. Degradation of Materials in Nuclear Power Systems-Water Reactors, p.834, ANS (2003).
12. M. L. CASTANO, M. S. G. CARCIA, G. DE DIEGO VELASCO, D. GOMEZ BRICENO, Crack Growth Rate of Hardened Austenitic Stainless Steels in BWR and PWR environments, Proc. 11th Int. Symp. Environ. Degradation of Materials in Nuclear Power Systems-Water Reactors, p. 845, ANS (2003).
13. P. L. ANDRESEN, T. M. ANGELIU and L. M. YOUNG, Effect of Martensite and Hydrogen on SCC of Stainless Steels and Alloy 600. Corrosion/2001, Paper No.228, NACE (2001).
14. J. H. Kim and R. G. Ballinger, Corrosion, 64, p.645 (2008).
15. K. NEGISHI, Characterizing the SCC Growth Behavior in 316L SS Weld metal after Thermal Aging Simulating Plant Conditions. Master Thesis, Tohoku University, March, 2009.
16. Z. P. LU, T. SHOJI, Y. TAKEDA, Y. ITO, A. KAI and N. TSUCHIYA. Corros. Sci., 50, p.625 (2008).
17. S. MOSTOVOY, P. B. CROSLEY and E. J. RIPLING, J. Mater., 2, P.661 (1967).
18. P. L. ANDRESEN and M. M. MORRA, J. Nuclear Mater., 383, p.97 (2008).
19. T. SHOJI, Z. P. LU, Y. TAKEDA, H. MURAKAMI and C. Y. FU, Deterministic Prediction of Stress Corrosion Crack Growth Rates in High Temperature Water by Combination of Interface Oxidation Kinetics and Crack Tip Asymptotic Field, 2008 ASME Pressure Vessels and Piping Division Conference (ASME PVP 2008), PVP2008-61417, ASME (2008).
20. M. ITOW, M. KIKUCHI, N. TANAKA, J. KUNIYA, M. YAMAMOTO, S. SUZUKI, S. NAMATAME and T. FUTANI SCC Growth Rates and Reference Curves for Low Carbon Stainless Steels in BWR Environments, ASME PVP 2004, P. 167, ASME (2004).
21. P. L. ANDRESEN and M. M. MORRA, Effects of Positive and Negative dK/da on SCC Growth Rates, Proc. of the 12th Int. Symp. Environmental Degradation Materials Nuclear Power Systems-Water Reactors, p. 167, TMS (2005).
22. Z. P. LU, T. SHOJI, Y. TAKEDA, Y. ITO, A. KAI and S. YAMAZAKI, Memory Effects and Steady State Growth Kinetics for Stress Corrosion Cracking of Cold Worked 316L Stainless Steel in High Temperature Pure Water, Proc. 13th Int. Symp. Environ. Degradation of Mater. Nuclear Power Systems-Water Reactors. CDROM, CNS (2007).
23. M. TSUBOTA, Y. KATAYAMA, Y. SAITO and T. KANEKO, Stress Corrosion Cracking Growth Behavior of Cold Worked Austenitic Stainless Steel in High Temperature Water, Proc. of the 12th Int. Symp. Environmental Degradation Materials Nuclear Power Systems-Water Reactors., p. 109, TMS (2005).
24. M. ANDO, K. NAKATA, M. ITOW N. TANAKA, M. KOSHIISHI, R. OBATA, Y. MIWA, Y. KAJI and M. HAYAKAWA. CGR Behavior of Low Carbon Stainless Steel of Hardened Heat Affected Zone in PLR Piping Weld Joints. Proc. 13th Int. Symp. Environ. Degradation of Mater. Nuclear Power Systems-Water Reactors. CDROM, CNS (2007).